Hull support for planking, painting and, definitely, building wooden ship models. It allows to hold the model by the keel. This hull planking vise is perfect to work on the boat vertically once you have built the hull: it is completely fixed, without any oscillation. It is undoubtedly an indispensable complement to the naval modelers.
Warning: Last items in stock!
HULL SUPPORT FOR PLANKING CHARACTERISTICS
This simple hull support for planking, painting and building ship models brings you a practical and sure method to keep the hull inmobile, leaving both hands free to work the details more comfortably. It is ideal for example to maintain the hull static and balanced while you are drawing waterline.
The hull support for ship modelsis made of solid wood and has a length of forceps 300 mm. It is recommended to hold boats up to 400 mm false keel approximately -valid for models of the 19000, 20100 and some of the 20400 Artesania Latina's series-.
It has a pivot point to tilt the hull to the ideal working position.
Fastening the hull and the turning point of the support are fixed by screws, without additional tool.
Two metal clamps included to secure the bracket to the edge of the desk.
- Support clip length and 30mm.
- Pivot point to tilt the hull and work more comfortably.
- Metal clamps to fix the stand to the edge of the worktable.
- Recommended minimum age 14 years.
- It contains product safety dangerous tools if not used properly.
- Use under the supervision of an adult.
- Keep out of reach of children.
- Assembly required (easy and fast). We recommend applying glue joints and wood finish to prolong its life.
Bar length: 30 cm.
You have a turning point (port, starboard).
Build your 1/50 scale model of the Swift, a beautiful Virginia pilot boat from 1805. Buying this modeling kit, you will have every needed piece to build this wonderful model. You will only need to put your tools and time in order to enjoy your favourite hobby.
The plank bender is one of the irreplaceable modeling tools. It helps you to bend successfully any strips or rods over 3 mm of your model ship. It is the perfect tool to get started in naval modeling. See also the amazing electric version: Electric Plank Bender