Your cart
Your shopping cart is empty
Check if you have products in your favorites, and don't run out from Artesanía Latina!
Waterborne Paint: Red FS11136 (20 ml)
27712
2.27 €
Rating:
(0)
The bottle of water-based paint for brush and airbrush from Artesanía Latina in red FS11136 is the ideal product for perfect finishes on your models and crafts. It contains 20 ml of product and provides a semi-matte finish. The red water-based paint FS11136 is easy to apply thanks to the supplied cannula. The drying process is very fast, you will hardly have to wait, so incorporate it into your model workshop to make scale models and other projects shine once they are built!
CHARACTERISTICS RED WATER-BASED PAINT FS11136 FOR MODELS AND DIY PROJECTS
The red water-based paint FS11136 for models and DIY projects comes in a 20 ml bottle with a cannula for a precise, fair and easy application. It is characterized by its great adhesion, with no tendency to sag, and by its great covering power. It forms an elastic and durable film with a semi-matte finish, resistant to rubbing and with great stability and color retention.
100% acrylic paints, such as this water-based paint from Artesanía Latina, are the most used by the expert modeler, since they are the most suitable for airbrush application, although it can also be applied with a brush diluted with water. Indispensable in your modeler's workshop!
USES OF THE ACRYLIC RED PAINT FS11136 FOR MODELS AND HANDICRAFTS
FS11136 red acrylic paintfor models and handicrafts can be used to paint the model kits of Artesanía Latina and for all kinds of handicrafts. They are perfectly suitable for airbrush use, although they can also be used with a brush.
These water-based acrylic paints can be thinned with alcohol or less corrosive thinner, are less toxic and deposit less, that is, they do not require much stirring to achieve a uniform texture.
The drying time of the red acrylic paint FS11136 for models and crafts is very short as they usually dry to the touch in about 20 minutes at 20º with RH of 70% and completely in one hour. If you need to apply a second coat, you will only have to wait about 6 hours approximately. It is advisable to give a coat of primer before applying our paints. The surfaces to be painted must be clean, dry and properly prepared.
In short, you will be able to work with airbrushes and their techniques thanks to this red acrylic paint FS11136 for scale models and DIY projects. Airbrushing will give you the best results in the finishing of your scale models with this paint!
Made in Spain.
