Semi-Gloss Dye Varnish: Oak Shade (125 ml)

$(USD)10.99

Oak shade water-based semi-gloss dye varnish for staining unvarnished wood or any other porous surface. Artesania Latina jar of oak shade water-based stain varnish contains 125 ml of product. Odorless, with great ease of brush and airbrush application and exceptional finishing. Excellent resistance and durability. It will help you to ensure that the result after applying it to your wood creations, both models and other crafts, is as desired. Add it to your model building workshop to make your wooden models shine once they are built! You can also get this oak-tone water-based satin dye varnish with the acquisition of Dyes Set: Hardwoods, along with two other products: water-based stain for walnut-colored wood and water-based stain for sapeli-colored wood.

$(USD)10.99
Quantity

Close
 

General sales conditions: check them here

 

Shipping and returns: check here

CHARACTERISTICS WATER-BASED VARNISH SATIN FOR WOOD OAK TONE

The varnish water-based stain satin for wood tone oak is used to varnish any model of wood and crafts of the same material or any other porous material, among other creations. No need to stain the wood or surface beforehand. It offers a silky finish with optimal elasticity. Virtually odorless. It is presented in a bottle with a quantity of 125 ml of product.

Its formulation includes additives that give it a high capacity to filter ultraviolet rays from sunlight, turning it into a long-lasting varnish that does not yellow. Formulated 100% water-based, they can be diluted with water or mixed with each other to obtain other shades. The oak color tone obtained in the finish can be adjusted by applying more coats of varnish.

Our finishing products are the most used by the expert modeler, since they are the most suitable for application by airbrush and brush. The satin water-based stain varnish for oak-tone wood, during the processes of painting and varnishing wooden models and other crafts, is essential at your model building workshop!

USES WATER-BASED STAIN VARNISH OAK TONE FOR WOOD AND POROUS SURFACES

The semi-gloss water-based stain varnish for oak-tone wood is used to achieve the best finish on all types of wooden surfaces and models and other porous materials. It can be used for any painting process of the Artesania Latina wooden modeling kits, whether they are boats, planes or other types of vehicles. It is perfectly suitable for use with airbrush, although it can also be used with brush.

Regarding the uses of this oak color water-based stain varnish, perform the following steps for its application. Shake the bottle well before use. The surface to be stained must be clean and dry. Apply with a brush or pin, wetting abundantly and evenly, and remove the excess with a cotton cloth. The application can be repeated to obtain a more saturated and intense tone. We emphasize that you can also paint with an airbrush if it is easier for you. It is easy to apply, for which we recommend our specific thinner for airbrush.

- Dry to the touch: 2-3 hours at 20ºC

- Repainted: 10-12 hours at 20ºC

In short, you can work with airbrushes and their techniques thanks to this magnificent dye varnish. The airbrushing will provide you with the best results in the finishes of your models and wood creations using this oak-tone semi-gloss water-based stain varnish.

27606

You could also need...