Your cart
Your shopping cart is empty
Check if you have products in your favorites, and don't run out from Artesanía Latina!
Water-based paint: Gunport Red (20 ml)
27716
2.27 €
Part Replacement Service
The Artesanía Latina bottle of water-based paint in gunport red for brush and airbrush is the ideal product for perfect finishes on your models and crafts. It contains 20 ml of product and provides a semi-matt finish. The maroon water-based paint is easy to apply thanks to the supplied cannula. The drying process is very fast, you will hardly have to wait at all, so add it to your model workshop to make scale models and other projects shine once they have been built!
FEATURES GUNPORT RED WATER-BASED PAINT FOR MODELS AND DIY PROJECTS
Gunport red water-based paint for models and DIY projects comes in a 20 ml bottle with a cannula for a precise, fair and easy application. It is characterised by its high adhesion, no tendency to sag, and its high covering power. It forms an elastic, durable film with a semi-matt finish, resistant to rubbing and with high colour stability and retention.
100% acrylic paints, such as this water-based paint by Artesanía Latina, are the most used by the expert modeller, as they are the most suitable for airbrush application, although it can also be applied with a brush by diluting it with water. Indispensable in your modeller's workshop!
USES OF GUNPORT RED ACRYLIC PAINT FOR MODELS AND HANDICRAFTS
Gunport red acrylic paint for models and handicrafts can be used to paint the Artesanía Latina model kits and for all kinds of handicrafts.. They are perfectly suitable for use with airbrushbut can also be used with a brush.
These water-based acrylic paints can be thinned with alcohol or thinner They are less corrosive, less toxic and less deposited, i.e. they do not require much stirring to achieve a uniform texture.
The drying time of gunport red acrylic paint for models and crafts is very short as they usually dry to the touch in about 20 minutes at 20º at 70% RH and completely dry in one hour. If you need to apply a second coat, you will only have to wait approximately 6 hours. It is advisable to give it a coat of primer before applying our paints. The surfaces to be painted must be clean, dry and properly prepared.
In short, you will be able to work with airbrushes and their techniques thanks to this gunport red acrylic paint for scale models and DIY projects. Airbrushing will give you the best results in the finishing of your scale models with this paint!
Made in Spain.