CHARACTERISTICS PAINTS SET FOR BLUENOSE II & CUTTY SARK BOAT MODELS

The set of water-based paints for Bluenose II and Cutty Sark boat models consists of 6 jars of different paints, each one with 20 ml of product. In this sense, it includes the following colors in paints: Off White, Off Black, Bright Red, Bright Green, Aluminum and Gold.

Acrylic paints, such as these from Artesania Latina, are the most used by expert modelers, since they are the most suitable for airbrush application. The set of water-based paints for Bluenose II and Cutty Sark boat models is water-based and acrylic. Indispensable in your modeling workshop!

USES OF WATER-BASED PAINTS FOR BLUENOSE II & CUTTY SARK

This set of paints for ship models can be used to paint Bluenose II and Cutty Sark. They are perfectly suitable for use with airbrush, although they can also be used with brush.

These water-based acrylic paints can be diluted with alcohol or thinner less corrosive, less toxic and they deposit less, that is, much stirring is not required to achieve a uniform texture.

The drying time of the pack of water-based paints for Bluenose II and Cutty Sark models is very short since they usually dry to the touch in about 20 minutes and completely in an hour. If you need to apply a second coat, you will only have to wait approximately 6 hours. It is advisable to give it a primer layer before applying our paints.

In short, you will be able to work with airbrushes and their techniques thanks to this set of paints for Bluenose II and Cutty Sark ship models. The airbrushing will provide you with the best results in the finishes of your models by means of these paints!