avion archivos - El Blog de Artesanía Latina

Messerschmitt BF109G Model Assembly (I): Build This Spectacular 1/16 Scale Model with Our Help

Posted on February 3, 2022March 2, 2022 by Administrador DelBlog

Artesania Latina’s modelers and designers know that any help is good for the construction of any scale model. That is why on this post we are going to show you through different videos how to carry out the assembly of the model Messerschmitt BF109G (20356) at 1/16 scale. A beauty, a jewel of the aircraft modeling made of metal and photo-etched for which we have edited 16 videos in which we show the precise way of its assembly. Join us on this flight! Fasten your seat belts!

So… Let’s go! On this Chapter 1 of our Assembly Diary, we explain the steps between 1 and 9 of the instructions: ‘Intermediate Fuselage Frames and Their Details’. Previously, the modeler must carefully extract the different parts of the plate and identify them for their correct positioning. What tools for modeling we recommend to get this goal?

– Scissors / Thread Snips (27060).

– Mini Diamond Files (27015-3).

– Cyano Applicator (27302).

– Thick Cyano (27650).

– Stainless Steel Ruler (27069).

– Needle Nose Pliers (27213).

– Cutter N1 (27019).

– Acrylic Paints Set for Messerschmitt BF109G (277PACK5).

MESSERSCHMITT BF190G MODEL ASSEMBLY: TAIL AND FUSELAGE

Later, on Chapter 2 of the Assembly Diary for the Messerschmitt BF109G model assembly -steps from 10 to 34-, we talk about how to build ‘The Tail and The Fuselage’ of the German fighter (First Part).

For this phase, the tools that the modeler needs are the same as the previous ones, but these three must be added:

– Straight Cutting Pliers (27212).

– Straight Tweezers Ultra Fine Tip (27204).

– Angle Conveyor and Squares (27325).

We continue on Chapter 3 of the Assembly Diary for the Messerschmitt BF109G model assembly -steps from 35 to 57- with the Second Part explaining how to build ‘The Tail and Fuselage’ of this faithful miniature replica of the aircraft of World War II. For this moment, the modeling tools that are required are the previous ones, in addition to this one:

– Sandpapers 400 Grit (27636).

To finish this area, the ‘Landing Gear and Tail’ is the title and the subject shown on Chapter 4 for the assembly of the scale model Messerschmitt BF109G -steps from 58 to 79-. The modeler is not forced to incorporate any new tool here, she/he can continue using the ones already mentioned.

BF109G PRECISION COCKPIT ASSEMBLY

One of the beauties of the 1/16 scale model of the German aircraft called Messerschmitt BF109G is its extremely detailed ‘Cockpit’. The Chapter 5 of Artesania Latina’s Official Assembly Diary -steps from 80 to 101 of the instructions on DVD format- deals with how to build that area of the plane First Part. Our modeling friends don’t have to add any new modeling tools now either.

Next, Chapter 6 reflects the Second Part of the ‘Cockpit’ construction. Specifically, we reveal how to carry out steps 102 to 125 of the assembly guide that contains this fabulous modeling kit made of the highest quality metal and photo-etched parts.

And, finally, the Third Part of the video that speaks about the ‘Cockpit’ is the Chapter 7 for an optimal construction of the Messerschmitt BF109G scale model. Here are the steps between 126 and 147. At this stage, we will also need…

– Masking Tape (27633).

MESSERSCHMITT BF109G MODEL ASSEMBLY: LEFT WING

We move on to the correct assembly of the ‘Left Wing’ Part One on Chapter 8. Steps 148-173 of this detailed audiovisual guide for the construction of the model Messerschmitt BF109G.

Here, Part Two about the assembly of ‘Left Wing’, Chapter 9, steps 174-197.

Next week we will return to each step that is still missing for the construction of this model. Meanwhile, there is much more information interesting about the BF109G by clicking here.

Model Building

Black Friday Model Building 2021: Ship Models Kits, Tools and Accessories Catalog… 15% Off!

Posted on November 24, 2021August 3, 2023 by Administrador DelBlog

One of the dates set for our modelers friends has finally arrived! Artesania Latina 2021 Black Friday Model Building. One of the most interesting on the market when it comes to hobbies and crafts. No other Black Friday belonging to large multinational companies that sell products related to this beautiful hobby has a comparison. You will find the widest variety and the best deals on wooden model ships, airplanes and other vehicles, and the most precise modeling tools on our website. Not forgetting all the accessories, airbrushing and woods. From this Thursday, November 25th at 0:00 a.m. (CET) until Sunday 28th at 11:59 p.m. (CET), the entire web catalog … 15% Off!

More products you purchase on our 2021 Black Friday Model Building, more will be the savings in euros -or dollars, depending on your country-. So it is, for example, an excellent time to, in addition to buying the model ship kit or air model kit that you have been wanting to assemble for months, add the tools you need. For the finishing touch once you’ve built your model, also include paints, varnishes, airbrushes – or brushes -, LED lighting sets, and a host of details. Remember, four days with a 15% savings!

During the last two years, Artesania Latina team of professionals has made an arduous effort to present new and improved scale naval models in this year 2021. Wooden ship models that belong to naval history, not only in Spain and Europe, but in the entire world. Thought and designed by the best modelers to be a true reflection of the boats that once sailed. Take advantage of our Black Friday Model Building 2021 to get hold of them!

NEW PRODUCTS OF THE YEAR ON BLACK FRIDAY MODEL BUILDING 2021: SHIP MODELS

What are the novelties of 2021 in terms of naval modeling? We started the year presenting the renewed and beautiful scale model in wood of the caravel Santa MarIa, of which you can see all its characteristics in an enlarged way here. We continue with the majestic 1/65 scale model of the Swedish warship Vasa. You can read further information in the post about this Nordic miniature replica. It is a true jewel of naval modeling given its great level of detail.

Subsequently, a reissue with many improvements of the naval modeling kit of the well-known paddle steamer King of the Mississippi at 1/80 scale arrived at our warehouses. One of the models most demanded by our modeling friends, without a doubt, about which you can also learn much more thanks to this blog article.

At the beginning of autumn, we unveiled one of the classics of British and world naval history that was also being manufactured again. The 1/65 scale model of the British ship HMS Endeavour, completely remade based on the existing information about the ship. In the written blog post, you have a lot of data related to this model.

Almost at the same time, a spectacular artwork of naval modeling came to light, a pride of model for modelers. The 1/72 scale model of the French ship Soleil Royal, which we will talk about soon.

Finally, a few days ago, we put up for sale on our website the renewed model of the Spanish training ship Juan Sebastian Elcano, at 1/72 scale. Aimed at beginning modelers, you can find out more about your modeling kit here.

LUXURY AIRCRAFT MODELS ON 2021 BLACK FRIDAY MODEL BUILDING

Although it is not from a ship but from an airplane, we must remember, of course, the new miniature replica of the German Messerschmitt BF109G fighter. A post is also available about this spectacular 1/16 scale model.

Hurry to take advantage of these days of Black Friday of Modeling 2021 and assemble some of these beautiful novelties from our catalog! Or if you wish, build some of the dozens of the remaining models of ships, airplanes and our precious stagecoach. All 15% Off!

ADD NEW 2021 MODELING TOOLS TO YOUR KIT 15% OFF

As we mentioned before, these Black Friday Model Building 2021 online sales days that take place from Thursday 25th to Sunday 28th come like a glove to buy tools, micro, in set format and specific for naval modeling. If you add any tool / s to your model, counting the money that is deducted from 15% of the model, you can practically get free with what you save. Your shopping cart will be much cheaper when you see it.

In 2021, Artesania Latina professionals have continued to expand the catalog of tools to make the experience of building our modeling kits more pleasant. Always thinking of the modeler friends who assemble our models. Regarding this aspect, the new additions of Micro Tools should be highlighted, small and high-quality tools that allow more precise and meticulous tasks to be carried out.

The first, Micro Moulding Scrapers / Micro Shapers C-type, the third available now, which allows shaping wooden and plastic slats. You can create moldings in different shapes to decorate your models. The second, the Micro Mitre Box with Precision Saws to make 45º and 90º cuts in pieces of wood and plastic. And the third, Micro Tools for Rigging, which greatly facilitates its assembly.

FIGURINES AND ACCESSORIES, ALSO AVAILABLE ON BLACK FRIDAY MODEL BUILDING 2021

After your ship model is built, there are several things you still need to make it look perfect. This year we have also created new figurine sets to make your naval wooden model come even more alive and look more real. Made of metal and ready to be assembled and painted. You can now get a 15% discount on the King of the Mississippi set, on those of the British ship HMS Endeavour and, finally, those that belongs to all Galleons and Caravels. What would our ship models be without their crews and passengers on deck.

Another news for our modeling friends. Now you can light up your model if you have LED pre-installation or if you have created it on your own with the LED Lighting Set for Models and DIY Projects. Your jaw will drop to see your naval miniature illuminated! And count on your own spare parts by taking a look at the Accessories section.

PERFECT FINISHES THANKS TO THE NEW WATER-BASED ACRYLIC PAINTS

If you want to achieve the best finishes for your finished model, this 2021 we also offer you another unbeatable novelty. Our wide assortment of individual quick-drying acrylic water-based paints and specific scale models ones. We don’t forget all our airbrushes, new brushes and other tools so that your miniature replica looks as it should. Yes, yes, everything also with a 15% of up to next Sunday 28th!

All that said, any model maker should take advantage of this opportunity on Black Friday Model Building 2021 to get, for example, the following shopping cart, and thus save more money: the modeling kit you dream of assembling, the tools you need, the life-giving figurines, the color paints and the LED lighting set. If you plan to buy all this sooner or later, now it is the best time! A 15% Off on the highest quality products made by Artesania Latina… It doesn’t happen every day!

Aircraft Models

Messerschmitt BF109G Fighter Model: Aircraft Modeling Revolution (II)

Posted on May 20, 2021October 7, 2021 by Administrador DelBlog

Our modelers continue with the second part of the post about the premium scale model of the famous German Messerschmitt BF109G fighter. They add that “the structure of the fuselage has been reinforced as a grid as on the tail. Then, we give a great strength, firmness and longevity to the BF109G model“. In this way, lovers of aircraft modeling who assemble this replica will see that many parts are fully coupled. That is because it has tabs and grooves that almost make the use of glue unnecessary.

One of the fabulous features of the Messerschmitt BF109G, German fighter metal and plastic model is the inclusion of an electronic system for the propeller movement and for the LED position and existing control panel in the cabin. According to Artesania Latina’s team, this design work has been quite difficult because “it has been necessary to introduce the entire electrical system inside the tank with a ‘L’ form, which is located just below the pilot seat.”

In addition, for the wiring to be quite imperceptible, “the arrangement of the cable has been taken care of in detail, because a grayish color similar to steel has been chosen and it has been arranged in parallel to the wing grids and the fuselage”, says one of our experts. Precisely, the metal parts to build these area and the rest of the structure come in stainless steel photo-etched and injected die-cast.

FAITHFUL REPLICA WITH GREAT REALISM: MESSERSCHMITT BF109G MODEL

Impressive its great realism! It has mobile parts, such as its manual retractable landing gears; its practicable cockpit dome; and its practicable ailerons, flaps and rudder.

The amount of detail that 3D designers have included in this aviation modeling artwork is very high: the model of the BF 109 has radio, battery, oscilloscope and oxygen cylinders, among other decoration accessories.

Finally, the Messerschmitt BF109G metal and plastic model is a museum jewel that any modeler must assemble and exhibit in any room.

For more information about Messerschmitt BF 109 1/16 scale model, click here.

Read the first part of this post.

Aircraft Models

Messerschmitt BF 109G Fighter Model: Aircraft Modeling Revolution (I)

Posted on May 13, 2021October 7, 2021 by Administrador DelBlog

After working two years, our professional 3D designers and modelers of Artesania Latina are proud to present you a new landmark on aircraft modeling. This model is a revolution in every way. It’s made of metal – stainless steel – and photoetched of the Luftwaffe legend. The German fighter Messerschmitt BF 109G model is your next choice.

The BF 109G 1/16 scale model is a fully reliable replica of the original aircraft aimed at advanced modelers. It is a fighter model that will surprise the fans thanks to its majesty and robustness. It weighs 3.5 lb and measures 22.24’’ length, 24.40’’ width and 8.07 height.

During the spring of 2018, Artesania Latina team decided that the model of the German airplane Messerschmitt BF 109G would be the next project of one of the most important modeling companies in the world since 1970. The fighter of the Luftwaffe was the chosen one so that our friends had a new and exciting modeling challenge to face.

BF 109G FIGHTER MODEL: 3D SPANISH QUALITY DESIGN FOR THE WHOLE WORLD

The 3D design project of the great Messerschmitt BF 109G model is made of metal and photoetched. It has been developed with impeccable results by our highly qualified on industrial design experts.

Firstly, they have shaped the different parts of the plane with 3D design software. Secondly, the parts have been printed using the latest technologies, adapted and modified for correct assembly.

After this exhaustive test / error labor until everything fits perfectly, one of our designers clarifies this issue. “We have not had problems designing the structure of the plane as soon as the parts have been printed everything has fit completely. However, yes on the tail because it was turned. In conclusion, we have decided to redesign it again before sending it to factory for its production, being now totally fixed”, explains the expert.

Here below you can watch two videos showing the scale model and the contents of the modeling kit:

Read the second part of this post.

Aircraft Models

Sopwith Camel 1/16 Aircraft Model: Jewel of Modeling Creation

Posted on October 18, 2018October 7, 2021 by blogartesanialatina

One of the most beautiful models of the market is already on sale on the web and at your usual modeling shop. The model of the British biplane of World War I and the most famous in the history, Sopwith Camel. Its scale is 1/16, this wonderful aircraft model Sopwith Camel has been created after a process of just over a year. Our 3D designers and our experienced modellers have participated.

If you want to know a little bit more how we got to the final result of this artwork of aerial modeling, it is interesting that you read the curiosities of the whole process from the beginning.

Back in the summer of 2017, the management of the company, 3D designers and modelers decide that the Royal Flying Corps plane is the next jewel of the aircraft modeling that is made available to our demanding clientele, we mean, our dear friends.

THE BEGINNING OF MODEL CREATION: SOPWITH CAMEL DESIGN ON 3D

One of our 3D design professionals takes the baton to proceed with the creation of the model digitally. To do this, we divide the process into two clear stages:

First phase, during the first two months, in which is dedicated to modeling the shape of the different pieces on 3D in detail. In this way, little by little she is creating in her computer and with specialized software each of the parts on an organized way. That means if she starts to design the tail of the plane, until that part ends, she does not start with another.

Second phase, in which this design is adapted and modified to the assembly process. Once different related pieces are finished, it prints them in 3D or cuts according to the material in order to be able to verify the right assembly.

The priority of Artesanía Latina is always to try to achieve the greatest comfort of our model friends when it comes to assembling the scale model. If any part does not fit properly, the 3D designer makes the appropriate modifications until the correct adjustment of the element.

POWERFUL MACHINERY FOR CREATING MODELS

In order to physically check the digitally created parts, our offices have the latest generation of machines. On the one hand, the laser cutter, which took a total of about 1 hour to cut all the pieces of wood. On the other, a 3D printer with which the resin (plastic) is printed. Already at our factory, we have the necessary machinery to manufacture die cast and photo-etched parts. So, finally, we have three manufacturing means for this jewel of model building.

Of course, all the rectifications that have to be made on the aircraft model Sopwith Camel original design are carried out so that when the final design is sent to the factory, the product will go out optimally.

The work of 3D design for modeling is arduous, logically, and you have to be prepared for it. What means the process that has pleased our designer has been the creation of the wings of the scale model. “Thanks to the size of them, you can see the inclination of these perfectly so the wings are beautiful. The length of the wings makes a great contrast with the body of the plane”, she says.

BIGGEST CHALLENGES ON THE MODEL DESIGN PROCESS

The biggest difficulty that has been encountered during the design process of this luxury modeling kit has been “to organize the large eight-centimeter engine of the airplane. Create it with its various parts so that it could be introduced in the model once it is finished. There are numerous parts that are placed on the same axis to be one of the last steps during its construction”. So, finally, “to facilitate – she continues – the assembly of the engine we have decided to divide it in two”.

Anecdotally, she tells us smiling that “the shape of one of the cylinders of the engine is very similar to the face of an owl”. So when you have our Sopwith Camel modeling kit at home, check it out for a smile.

The last step of the design is to send one of our expert modellers all the parts so that you start to verify that they fit each other.

BUILDING THE AIRCRAFT MODEL SOPWITH CAMEL BY THE EXPERT MODELLER

As we said before, the samples of the parts, once the 3D design of the aircraft model Sopwith Camel is finished, are taken by one of our modellers. He starts to assemble the model to the smallest detail. If the result is positive, it is sent to our factory.

Once created, the factory returns them to our modeller as if they were a final customer. Target? Let our professional rebuild the scale model as if it were one of you. If there is a small detail that is not well prepared, that element is designed and sent to the factory with the modification made. The goal is there is no problem when you are building it.

For our beloved modeller who has assembled the Sopwith Camel 1/16 aircraft model, the most positive of his experience has been “the detailing of the interiors. The seat and the control panel are very well achieved. The engine, a true reflection of what was on the original plane, and like the machine guns, which are also very realistic”.

RECOMMENDATIONS OF THE MODELER FOR ITS CONSTRUCTION

As a recommendation for all the modellers, ours suggests that, for the assembly of the wings, “the instructions of the modeling kit should be followed faithfully in order to avoid later inconveniences. Until the wings are completed with all the suspenders and reinforcements, they are weak”.

In this way, our qualified professional urges the modellers to “the space of the work table is wide and free of obstacles. Then, you can manipulate the wings without colliding with another element that could spoil them, a fact that nobody wants”.

Our modeler considers that, as such, he must do an empathy job to put himself in the shoes of one of you while he is assembling the model. According to him, speaking of him as a professional and thinking of our client friends, “we should not let ourselves be carried away by the level that I hold in terms of modeling knowledge. We are guided according to their needs and expertise”.

In conclusion, and as he says, “if you follow the advice and instructions, your experience will be satisfactory and you will not have an equal model in your showcase, it is an artwork”.

Find out all about the aircraft model Sopwith Camel here.

Aircraft Models

Our Fokker Dr. I and Sopwith Camel models, at the VIII Contest of Static Modeling ‘Ciudad de Leganés’

Posted on March 21, 2018June 3, 2021 by blogartesanialatina

Artesania Latina has recently attended another great event for the model building family, in this case in Spain. We have presented the luxury scale models Fokker Dr I and Sopwith Camel 1/16. Why? That’s because our perennial interest to know and present the novelties of the modeling market, so we could not be absent from the VIII Contest of Static Modeling ‘Ciudad de Leganés’. It was celebrated on March 16th, 17th and 18th at the Pabellón Deportivo Europa of this city in Madrid.

The event, organized by the Modeling Association Model34 from Madrid, has had an extraordinary participation of modelers and model lovers.

On the first floor of the pavilion, we have seen medieval historical re-enactments on scale and demonstrations to teach how to paint ship models, planes models and many more miniatures. We also have learned how to achieve oxides in vehicles, weathering in special ships and which are the best complements for dioramas. All the people have enjoy the fantastic presentations of experts on model building or a jury of the contest of the highest level. One of those members has been one of Artesania Latina modelers.

As a curiosity, the commemorative figure of the VIII Contest of Static Modeling ‘Ciudad de Leganés’ has been a well-known one for the Spaniards: the 1960 Legionnaire of Western Sahara.

SUCCESS OF THE FOKKER DR I & SOPWITH CAMEL 1/16

On the other hand, Artesania Latina has taken advantage of such a great opportunity with so many model friends to make known two of their most recent and beautiful creations: the triplane Fokker Dr.I, Red Baron’s plane; and the biplane of the Allied Forces Sopwith Camel. Both models are made wood and metal.

The great acceptance of these Fokker Dr I and Sopwith Camel models there has made clear the enormous work done by Artesania Latina’s modelers.

Finally, the three days during the event has developed has served, above all, for model and miniature lovers to meet and share all their experiences. They have spoken a lot about the construction of models. What a beautiful hobby we enjoy!