vídeotutoriales archivos - El Blog de Artesanía Latina

Elcano Ship Model Instructions (IV): Finish Building the Spanish Training Ship with Our Latest Video Tutorials!

Posted on March 23, 2023March 21, 2023 by Administrador DelBlog

We dive into the last part of the Elcano ship model instructions for its assembly. With these video tutorials made by our modelers, we put the finishing touch to the set up of the Spanish school ship model Juan Sebastián Elcano / Chilean Esmeralda (22260) at 1:250 scale. As we mentioned before, it is a faithful miniature replica excellent for beginners on the hobby of naval modeling.

ELCANO SHIP MODEL INSTRUCTIONS: SAILS (PART III – A)

We continue with ‘Sails – Part III’, which is Step 21 of the instructions for assembling the Elcano ship model (22260).

Arrange one unit of parts S7, S8, S9 and S10, that is, more sails. Take part S7, and sew it with a needle cotton thread –part CT1– around the stick part Y1, from top to bottom. When you finish sewing, help yourself with some Straight Fastening Tweezers (27020) to tie the knot on the stick.

Now, with a cutter, drill two small holes in the two opposite corners of the stick. Insert the two BR1 parts -two rings- into these. Take a part BL and thread -part CT1-. Put the thread through the hole and around part BL. Tie a knot at the end with the help of the aforementioned tweezers. The thread should be fully stretched through the hole and around the part BL. Apply Dense Cyanoacrylate for Porous Materials on the knot and allow to dry.

Next, you will have excess thread on both sides of the knot. First, completely cut one of the threads, while the other leave a few centimeters long. Don’t cut it all the way. Second, also using the tweezers, tie that thread with the BL part to the left side of the stick and tie the knot with cyano. Third, if there is excess thread, remove it with a cutter. Repeat all these actions on the other end of the stick with another BL part.

The result should be this:

ELCANO SHIP MODEL INSTRUCTIONS: SAILS (PART III – B)

Then go through the entire process again with the other SAILS. For the sail part S8, you will need one Y2 part, two BR1 parts and two BL parts. For the part S9, one Y3 part, two BR1 parts and two BL parts. And for the S10, one part Y4, two parts BR1 and four parts BL. Take again the sail part S7 and thread part CT1. At one end of the stick, tie a knot with plenty of thread left over from both sides. Apply cyano and let dry. Repeat the process on the other end of the stick.

Take the S7 sail. Use a Curved Fastening Tweezers (27021) to pass the thread -part CT1- with a needle above the mast top, as seen on the video. The goal is the sail can be already hanging on its mast. Make the knots as shown, apply a little of cyano and cut the excess thread with the Thread Snips (27060). The sail already stays in place.

Repeat the process with the S8 sail. Once hung, it has to be attached to the S7 sail with thread. Tie them by means of the two BR1 parts that are on the sail. Passing the CT1 thread through the BR1 ring and, right after, tie it to the end of the stick. Repeat the process also for the other end of the pole with the other BR1 ring.

Do the same with the S9 sail, but this time tying it to the S8 sail. And finally, with the S10 sail, knotting it to the S9. This should be the final look with all the sails in place.

ELCANO SHIP MODEL INSTRUCTIONS: SAILS (PART IV – A)

Well, it’s time for the next task. Step 22 of the assembly instructions for the ship model Elcano (22260). This one is about ‘Sails – Part IV’.

Take the four sails parts S11. Now take one and, using a utility knife, drill three holes in each of the three corners of the sail. Then, insert one of the three parts BR1 -rings- into each hole. Open each part BR1 with two Needle Nose Pliers (27213) and insert the ring through the sail. After inserting it, close it again using the aforementioned pliers. As we have discussed, repeat the process with the other three sails.

Again, take a sail part S11. Insert thread through the BR1 ring found on the most pointed part of the sail, at the top and tie a knot. Cut the excess of one of the ends of the thread and pass the other end through the mast. Then bring the thread to the hull, tighten it, tie it off and glue it with cyano. Watch the video for it.

Now, thread CT1 through the outermost ring BR1. Begin to tie a knot and leave a hole to insert it into the bottom sail pole. Insert into the stick and close the knot. Do the same with more thread through the remaining BR1 ring, the third one, the one closest to the mast. In this sense, the sail part S11 will be attached to the lower sail.

ELCANO MODEL SHIP INSTRUCTIONS: SAILS (PART IV – B)

Below that bottom sail, place a PCL part. Bend the wire that has the stick on it and attach it to the mast. Use the pliers to twist the wire around the mast.

Take CT1 thread and pass it through the eye of the BR1 part of that lower sail to make a knot and pass it through the PCL stick. The sail will be attached to the mast. Remember to apply cyano to all the knots you make.

Thread CT1 through the ring on the hull and tie it to the stick so that it is taut. The rest of the thread, pass it through the mast top and tie it to the deck. Take a look at the video to run this process, which you will need to repeat for the other three sails.

ELCANO SHIP MODEL INSTRUCTIONS: SAILS (PART V)

Step 23 of Elcano ship model instructions (22260) for the assembly of Spanish school ship, is about the ‘Sails – Part V’. You need to pay close attention to the video so that you can build the rest of the sails.

JUAN SEBASTIAN ELCANO MODEL SHIP: DECKS (PART III – A)

We continue with Step 24 of the Elcano ship model instructions for its assembly. This is about ‘Decks – Part III’.

Take two M8 parts and glue them parallel to the foredeck as shown on the video. Next, take ten units of the part DM4. With the help of cyano and grip pliers, take five of these and glue each one next to the other on the deck area shown. Then turn the boat 180º and do the same for the other five on the other side of the deck.

Once this task is done, take a Stainless Steel Ruler 150 mm (27069). Use it to mark with a pencil on the edge of the hull two points with an equidistance of 18 mm. From each of these two points, with the ruler, measure and mark two points 6 mm inside the deck. Drill with a small hand drill at the two points marked on the deck.

Take an M6 part. Apply a drop of cyano and insert it with tweezers into one of the two holes made. Repeat the process with another M6 part and insert it into the other deck hole.

JUAN SEBASTIAN ELCANO MODEL SHIP: DECKS (PART III – B)

It is time to use thread part CT2 for the placement of part P2, previously painted with Off-White Acrylic Paint (27702). First, thread the thread through the two holes in part P2. Second, take the other end of the thread and feed it through an M6 part. Do the same with the other end. When you are inserting the two ends of the thread into each M6 part, insert them from the outside to the inside.

Next, make a knot in each of the two inserted ends so that the part P2 does not come loose. Apply a little cyano to each one. Repeat the process on the opposite side of the boat.

JUAN SEBASTIÁN ELCANO ASSEMBLY: HANDRAILS AND PROPELLER

The ‘Handrails and Propeller’ is Step 25 of the video tutorial for building the model of the Elcano ship. Take two PE3 parts, previously painted with off-white paint. Apply cyano to each of the tips of the base that will be inserted. Place each of the two PE3 parts on the edge of the hull and the deck with the help of a Curved Fastening Tweezers (27021). There are two in the bow.

Then, take a PE4 part, also previously painted with off-white colour. Bend it with your hands so that it takes on the curved shape of the stern. Once you have the shape, apply cyano to each of the corners and glue the part with both hands to the edge of the deck. Take another PE4 part and tack it right next to the one you placed earlier. Put it behind the lifeboat. Repeat the process on the other side of the hull.

Finally, the part M11 -propeller- enters the scene. Apply cyano to the tip to be inserted and place it with your hands and a pair of tweezers on the hull.

JUAN SEBASTIÁN ELCANO ASSEMBLY: LAST DETAILS TO FINISH (PART I)

We continue with the final step of the Elcano ship model instructions for its assembly with the ‘Last Details’, which is Step 26. Arrange a unit of the part WD3 with a diameter of 2×35 mm, previously painted off-white. Later, take the part FL1 -Spanish flag- and with the help of a cutter, remove the sticker protector.

Place the center of the sticker -it has a stripe drawn- on the stick and close the sticker with your hands and the handle of a scalpel cutter until both sides of the flag stick together. Stick it in the hole in the aft deck provided for it.

It is the turn of the part PE5 Elcano / PE6 Esmeralda -metal sheet with the name of the ship-. First, paint it with Hull Green Colour (27751). Then, sand the entire edge of the sheet with a utility cutter until you can see the metal of the sheet. Apply cyano and glue it to the stern of the boat, just below the flag.

JUAN SEBASTIÁN ELCANO ASSEMBLY: LAST DETAILS TO FINISH (PART II)

Now, take the two parts M17 -anchors-, previously painted with Off-Black Colour (27703). Place them into the two holes provided for this with the help of tweezers and a few drops of cyano. Finally, there is the part PE7 / PE8 -name of the ship for the base-. Also paint it with off-black colour, sand the edges with a cutter until you see the metal part and, with cyano, glue it to the exhibition base.

You have just finished building the wonderful model of the training ship Juan Sebastián Elcano / Esmeralda (22260)! Congratulations!

*Model Ship Elcano / Esmeralda Built by our modeling friend Girish Khandagale.*

We remind you that you can also purchase the Elcano Gift Pack (22260L), which includes the kit with the schooner sailboat, its paints and some tools. It has a lower price than if the products are purchased separately.

Read the third part of the post…

Model Building Tips

Mississippi Model Set Up (II): Video Tutorials to Assemble the Wooden Paddle Steamer

Posted on May 19, 2022May 24, 2022 by Administrador DelBlog

We continue with the ‘Model Building Tips’ section and with the second part of the video tutorials for the set up of the King of the Mississippi model (20515). The wooden naval modeling kit of the paddle steamer at 1:80 scale represents a faithful replica of the original model. The assembly of this classic North American wooden boat from the 19th century is aimed at modelers with an intermediate level of skills on naval modeling.

On this post, first, our team of modelers will show you how to assemble the columns and the railings of the second deck. Second, how to work the windows and the doors. Then, how to handle and place the high-quality photo-etched decoration parts. Next, we will show you how to make the capstan base. And finally, our modelers friends will know how to decorate the chimneys of the steamboat. These videos are a great help during the construction of the King of the Mississippi model. Especially the most difficult parts. Go for it!

MISSISSIPPI MODEL SET UP: SECOND DECK COLUMNS AND RAILINGS

We pick up the video where we left off a week ago, when we built the columns and railings of the first deck. On this occasion, we turn to the existing ones on the second deck of the American paddle steamer scale model. This explanation corresponds to Section 14 of the digital instructions. We remind you that you can download them for free in the same product file of the King of the Mississippi.

Apply cyanoacrylate (27650) on one of the wooden columns of the railing. With the help of a reduced size square or bevel (27325), manipulate it until it is completely straight on the second cover, nothing crooked. Repeat the process with the remaining columns -four more- as shown on the video, placing them on the place provided for it. Obviously, before gluing them, they must already be varnished.

Next, we take the curved wooden base of the railing, apply cyanoacrylate to it and adhere it to the front space between the two columns. Help yourself with some straight tweezers (27204) for this whole process. Remember, beforehand, do not varnish the part where you are going to put the glue. Once your photo-etched railing is painted, add a few small drops of cyan to different spots on its underside. Using the same tweezers, carefully place it between the two columns. On top of this, take the wooden upper part, the handrail with the tweezers, paint it with cyan too and fix it to the upper part of the railing. Do the same process with the other curved railing and with the two straight sides. The result should be this:

WINDOWS AND DOORS ASSEMBLY SECOND DECK OF KING OF THE MISSISSIPPI

On this seventh video, another of the important processes for King of the Mississippi (20515) model set up. Specifically, the assembly of the windows and doors of all the rooms on the second deck. On the digital instructions, steps between 13 and 24 of Section 15.

Take a pointed needle nose pliers (27213). Fold the tabs of the photo-etched parts of the windows and doors. Paint them with brush and with acrylic water-based paint burnt umber color (27743). Help yourself to grab the part of nails with precision straight pliers (27204). With these, go placing each of the windows and doors. Gently press with your hands to make the lashes fit. Apply cyan to the back of the window and door for a stronger hold.

Work the photo-etched parts from the doors of the windows. Paint them with buff acrylic paint (27740). Use the aforementioned tweezers to make the task easier. With a brush very fine size 000 (17200C), burnt shadow paint, draw the grids on the front. Apply cyan to the back, where you haven’t painted, and using precision straight pliers, glue them to each of the sides of the window. Repeat the process with all the rest. Once they are in place, paint all the interior frames of windows and doors with a brush and burnt umber paint.

Finally, take the different acetate parts -there are six- and check that the size is correct. Put cyan on the wood, on the wall inside of the rooms, and glue the acetates with the tweezers and hands. To put the acetates on the curved parts of the bow and stern, use in this case a curved tweezers (27021).

It should look like this:

MISSISSIPPI MODEL SET UP: PHOTO-ETCHED DECORATIONS

We continue with the following video tutorial for the construction of the model King of the Mississippi (20515): photoen-etched decorations of the fourth deck. These steps appear on Section 21 of the digital instructions.

Paint them with a flat brush and off-white water-based acrylic paint (27702). Once dry, glue them with cyan and the help of your own hands on the wooden plank of the fourth deck -where the coffer goes-. Before joining one part to another and adding cyan to adhere them, file with a mini diamond file (27015-3) a little the extremes that will be fixed with the others. Repeat this action. When you have to put the last part, if you have left over because it is too long, mark with a pencil where you should cut it. Cut it with a cutting pliers (27211), file and glue carefully. Put cyano on all the balustrade supports and remove the excess with the point of a scalpel cutter (27019). Now, paint all the joints of the different parts with off-white color.

Apply cyano all over the edge of the deck wood plank where you are going to glue the wooden parts on the lower part of the balustrade. Take that base part in wood, previously painted, and glue it under the already placed photoengraving. Repeat the process with the other parts.

Once it is finished, it should be like this:

CAPSTAN BASE OF KING OF THE MISSISSIPPI MODEL SHIP

The ninth tip that we show you for the set up of the wooden model of the paddle steamer King of the Mississippi (20515) is the building of the capstan base. Steps 1-4 of Section 29 on the digital instructions. Let’s continue with this classic jewel of the ship modeling that It reminds us of literary characters like Tom Sawyer and Huckleberry Finn, by Mark Twain.

Take the parts and paint them with a flat brush and off-black acrylic paint (27703). Use some precision straight tweezers (27204) to hold parts while painting. Glue a strip -previously painted- completely centered on the cover. Use a small centering ruler (27326) to make sure it sits perfectly straight in position. Next is the small star-shaped base part of the capstain. When it comes to gluing the four ribbons on cross shape and the rest on the shape of a star, also use an tiny square (27325). This way everything will be uniform. Continue repeating the process as seen on the video tutorial. Lastly, paint the edges of the star-shaped base part of the capstan with off-white.

When the modeller have done the task, it should look like this:

MISSISSIPPI MODEL SET UP: DECORATION OF CHIMNEYS

The tenth and last video tutorial refers to the decoration of chimneys. Steps 15 and 16 of Section 33 on the digital instructions for the set up of the magnificent wooden model of the King of the Mississippi, at scale 1/80 (20515).

Fold the photo-etched part look like some poles with the help of a flat-pointed grip pliers (27213). Give it a round shape, for example, using the handle of the scalpel cutter and your own hands. Using some curved fastening tweezers (27021), insert it into each of the two chimneys through the ‘rings’ half-closed you just created. Glue the part with cyanoacrylate so that it is completely fixed by pouring it on the inside of the aforementioned rings.

The end result should be similar to this:

We hope that these video tutorials that guide the modeler through some of the most precise or difficult parts of the assembly will help. Do not forget that you have, for sale separately, a King of the Mississippi Set of 18 Metal Figures (20515F) that will give life to your paddle steamer model. Likewise, you can also acquire the Specific Acrylic Paints Set (277PACK6) for this model, and forget about having to look for them.

Finally, if you want to have everything your modeling kit needs, treat yourself or surprise a loved one who loves naval modeling with the King of the Mississippi Gift Pack (20515L), which includes the model, the figures, the paints and some tools.

Read the first part of the post…