Posted in Model Building Tips

Mississippi Model Set Up (II): Video Tutorials to Assemble the Wooden Paddle Steamer

We continue with the ‘Model Building Tips’ section and with the second part of the video tutorials for the set up of the King of the Mississippi model (20515). The wooden naval modeling kit of the paddle steamer at 1:80 scale represents a faithful replica of the original model. The assembly of this classic North American wooden boat from the 19th century is aimed at modelers with an intermediate level of skills on naval modeling.

Mississippi Model Set Up (II) by Artesania Latina (20515). The perfect paddle steamer model kit.

On this post, first, our team of modelers will show you how to assemble the columns and the railings of the second deck. Second, how to work the windows and the doors. Then, how to handle and place the high-quality photo-etched decoration parts. Next, we will show you how to make the capstan base. And finally, our modelers friends will know how to decorate the chimneys of the steamboat. These videos are a great help during the construction of the King of the Mississippi model. Especially the most difficult parts. Go for it!

MISSISSIPPI MODEL SET UP: SECOND DECK COLUMNS AND RAILINGS

We pick up the video where we left off a week ago, when we built the columns and railings of the first deck. On this occasion, we turn to the existing ones on the second deck of the American paddle steamer scale model. This explanation corresponds to Section 14 of the digital instructions. We remind you that you can download them for free in the same product file of the King of the Mississippi.

Apply cyanoacrylate (27650) on one of the wooden columns of the railing. With the help of a reduced size square or bevel (27325), manipulate it until it is completely straight on the second cover, nothing crooked. Repeat the process with the remaining columns -four more- as shown on the video, placing them on the place provided for it. Obviously, before gluing them, they must already be varnished.

Next, we take the curved wooden base of the railing, apply cyanoacrylate to it and adhere it to the front space between the two columns. Help yourself with some straight tweezers (27204) for this whole process. Remember, beforehand, do not varnish the part where you are going to put the glue. Once your photo-etched railing is painted, add a few small drops of cyan to different spots on its underside. Using the same tweezers, carefully place it between the two columns. On top of this, take the wooden upper part, the handrail with the tweezers, paint it with cyan too and fix it to the upper part of the railing. Do the same process with the other curved railing and with the two straight sides. The result should be this:

Mississippi Model Set Up (II) by Artesania Latina (20515). The perfect paddle steamer model kit.

WINDOWS AND DOORS ASSEMBLY SECOND DECK OF KING OF THE MISSISSIPPI

On this seventh video, another of the important processes for King of the Mississippi (20515) model set up. Specifically, the assembly of the windows and doors of all the rooms on the second deck. On the digital instructions, steps between 13 and 24 of Section 15.

Take a pointed needle nose pliers (27213). Fold the tabs of the photo-etched parts of the windows and doors. Paint them with brush and with acrylic water-based paint burnt umber color (27743). Help yourself to grab the part of nails with precision straight pliers (27204). With these, go placing each of the windows and doors. Gently press with your hands to make the lashes fit. Apply cyan to the back of the window and door for a stronger hold.

Work the photo-etched parts from the doors of the windows. Paint them with buff acrylic paint (27740). Use the aforementioned tweezers to make the task easier. With a brush very fine size 000 (17200C), burnt shadow paint, draw the grids on the front. Apply cyan to the back, where you haven’t painted, and using precision straight pliers, glue them to each of the sides of the window. Repeat the process with all the rest. Once they are in place, paint all the interior frames of windows and doors with a brush and burnt umber paint.

Finally, take the different acetate parts -there are six- and check that the size is correct. Put cyan on the wood, on the wall inside of the rooms, and glue the acetates with the tweezers and hands. To put the acetates on the curved parts of the bow and stern, use in this case a curved tweezers (27021).

It should look like this:

Mississippi Model Set Up (II) by Artesania Latina (20515). The perfect paddle steamer model kit.

MISSISSIPPI MODEL SET UP: PHOTO-ETCHED DECORATIONS

We continue with the following video tutorial for the construction of the model King of the Mississippi (20515): photoen-etched decorations of the fourth deck. These steps appear on Section 21 of the digital instructions.

Paint them with a flat brush and off-white water-based acrylic paint (27702). Once dry, glue them with cyan and the help of your own hands on the wooden plank of the fourth deck -where the coffer goes-. Before joining one part to another and adding cyan to adhere them, file with a mini diamond file (27015-3) a little the extremes that will be fixed with the others. Repeat this action. When you have to put the last part, if you have left over because it is too long, mark with a pencil where you should cut it. Cut it with a cutting pliers (27211), file and glue carefully. Put cyano on all the balustrade supports and remove the excess with the point of a scalpel cutter (27019). Now, paint all the joints of the different parts with off-white color.

Apply cyano all over the edge of the deck wood plank where you are going to glue the wooden parts on the lower part of the balustrade. Take that base part in wood, previously painted, and glue it under the already placed photoengraving. Repeat the process with the other parts.

Once it is finished, it should be like this:

CAPSTAN BASE OF KING OF THE MISSISSIPPI MODEL SHIP

The ninth tip that we show you for the set up of the wooden model of the paddle steamer King of the Mississippi (20515) is the building of the capstan base. Steps 1-4 of Section 29 on the digital instructions. Let’s continue with this classic jewel of the ship modeling that It reminds us of literary characters like Tom Sawyer and Huckleberry Finn, by Mark Twain.

Take the parts and paint them with a flat brush and off-black acrylic paint (27703). Use some precision straight tweezers (27204) to hold parts while painting. Glue a strip -previously painted- completely centered on the cover. Use a small centering ruler (27326) to make sure it sits perfectly straight in position. Next is the small star-shaped base part of the capstain. When it comes to gluing the four ribbons on cross shape and the rest on the shape of a star, also use an tiny square (27325). This way everything will be uniform. Continue repeating the process as seen on the video tutorial. Lastly, paint the edges of the star-shaped base part of the capstan with off-white.

When the modeller have done the task, it should look like this:

Mississippi Model Set Up (II) by Artesania Latina (20515). The perfect paddle steamer model kit.

MISSISSIPPI MODEL SET UP: DECORATION OF CHIMNEYS

The tenth and last video tutorial refers to the decoration of chimneys. Steps 15 and 16 of Section 33 on the digital instructions for the set up of the magnificent wooden model of the King of the Mississippi, at scale 1/80 (20515).

Fold the photo-etched part look like some poles with the help of a flat-pointed grip pliers (27213). Give it a round shape, for example, using the handle of the scalpel cutter and your own hands. Using some curved fastening tweezers (27021), insert it into each of the two chimneys through the ‘rings’ half-closed you just created. Glue the part with cyanoacrylate so that it is completely fixed by pouring it on the inside of the aforementioned rings.

The end result should be similar to this:

We hope that these video tutorials that guide the modeler through some of the most precise or difficult parts of the assembly will help. Do not forget that you have, for sale separately, a King of the Mississippi Set of 18 Metal Figures (20515F) that will give life to your paddle steamer model. Likewise, you can also acquire the Specific Acrylic Paints Set (277PACK6) for this model, and forget about having to look for them.

Set of 18 Metal Figurines: King of the Mississippi (20515F).

Paints Set for Ship Model: Steamboat King of the Mississippi (277PACK6).

Finally, if you want to have everything your modeling kit needs, treat yourself or surprise a loved one who loves naval modeling with the King of the Mississippi Gift Pack (20515L), which includes the model, the figures, the paints and some tools.

Gift Pack with Ship Model, Figurines, Paints and Tools: King of the Mississippi (20515L).

Read the first part of the post…

Leave a Reply

Your email address will not be published.