instrucciones archivos - El Blog de Artesanía Latina

Elcano Ship Model Instructions (IV): Finish Building the Spanish Training Ship with Our Latest Video Tutorials!

Posted on March 23, 2023March 21, 2023 by Administrador DelBlog

We dive into the last part of the Elcano ship model instructions for its assembly. With these video tutorials made by our modelers, we put the finishing touch to the set up of the Spanish school ship model Juan Sebastián Elcano / Chilean Esmeralda (22260) at 1:250 scale. As we mentioned before, it is a faithful miniature replica excellent for beginners on the hobby of naval modeling.

ELCANO SHIP MODEL INSTRUCTIONS: SAILS (PART III – A)

We continue with ‘Sails – Part III’, which is Step 21 of the instructions for assembling the Elcano ship model (22260).

Arrange one unit of parts S7, S8, S9 and S10, that is, more sails. Take part S7, and sew it with a needle cotton thread –part CT1– around the stick part Y1, from top to bottom. When you finish sewing, help yourself with some Straight Fastening Tweezers (27020) to tie the knot on the stick.

Now, with a cutter, drill two small holes in the two opposite corners of the stick. Insert the two BR1 parts -two rings- into these. Take a part BL and thread -part CT1-. Put the thread through the hole and around part BL. Tie a knot at the end with the help of the aforementioned tweezers. The thread should be fully stretched through the hole and around the part BL. Apply Dense Cyanoacrylate for Porous Materials on the knot and allow to dry.

Next, you will have excess thread on both sides of the knot. First, completely cut one of the threads, while the other leave a few centimeters long. Don’t cut it all the way. Second, also using the tweezers, tie that thread with the BL part to the left side of the stick and tie the knot with cyano. Third, if there is excess thread, remove it with a cutter. Repeat all these actions on the other end of the stick with another BL part.

The result should be this:

ELCANO SHIP MODEL INSTRUCTIONS: SAILS (PART III – B)

Then go through the entire process again with the other SAILS. For the sail part S8, you will need one Y2 part, two BR1 parts and two BL parts. For the part S9, one Y3 part, two BR1 parts and two BL parts. And for the S10, one part Y4, two parts BR1 and four parts BL. Take again the sail part S7 and thread part CT1. At one end of the stick, tie a knot with plenty of thread left over from both sides. Apply cyano and let dry. Repeat the process on the other end of the stick.

Take the S7 sail. Use a Curved Fastening Tweezers (27021) to pass the thread -part CT1- with a needle above the mast top, as seen on the video. The goal is the sail can be already hanging on its mast. Make the knots as shown, apply a little of cyano and cut the excess thread with the Thread Snips (27060). The sail already stays in place.

Repeat the process with the S8 sail. Once hung, it has to be attached to the S7 sail with thread. Tie them by means of the two BR1 parts that are on the sail. Passing the CT1 thread through the BR1 ring and, right after, tie it to the end of the stick. Repeat the process also for the other end of the pole with the other BR1 ring.

Do the same with the S9 sail, but this time tying it to the S8 sail. And finally, with the S10 sail, knotting it to the S9. This should be the final look with all the sails in place.

ELCANO SHIP MODEL INSTRUCTIONS: SAILS (PART IV – A)

Well, it’s time for the next task. Step 22 of the assembly instructions for the ship model Elcano (22260). This one is about ‘Sails – Part IV’.

Take the four sails parts S11. Now take one and, using a utility knife, drill three holes in each of the three corners of the sail. Then, insert one of the three parts BR1 -rings- into each hole. Open each part BR1 with two Needle Nose Pliers (27213) and insert the ring through the sail. After inserting it, close it again using the aforementioned pliers. As we have discussed, repeat the process with the other three sails.

Again, take a sail part S11. Insert thread through the BR1 ring found on the most pointed part of the sail, at the top and tie a knot. Cut the excess of one of the ends of the thread and pass the other end through the mast. Then bring the thread to the hull, tighten it, tie it off and glue it with cyano. Watch the video for it.

Now, thread CT1 through the outermost ring BR1. Begin to tie a knot and leave a hole to insert it into the bottom sail pole. Insert into the stick and close the knot. Do the same with more thread through the remaining BR1 ring, the third one, the one closest to the mast. In this sense, the sail part S11 will be attached to the lower sail.

ELCANO MODEL SHIP INSTRUCTIONS: SAILS (PART IV – B)

Below that bottom sail, place a PCL part. Bend the wire that has the stick on it and attach it to the mast. Use the pliers to twist the wire around the mast.

Take CT1 thread and pass it through the eye of the BR1 part of that lower sail to make a knot and pass it through the PCL stick. The sail will be attached to the mast. Remember to apply cyano to all the knots you make.

Thread CT1 through the ring on the hull and tie it to the stick so that it is taut. The rest of the thread, pass it through the mast top and tie it to the deck. Take a look at the video to run this process, which you will need to repeat for the other three sails.

ELCANO SHIP MODEL INSTRUCTIONS: SAILS (PART V)

Step 23 of Elcano ship model instructions (22260) for the assembly of Spanish school ship, is about the ‘Sails – Part V’. You need to pay close attention to the video so that you can build the rest of the sails.

JUAN SEBASTIAN ELCANO MODEL SHIP: DECKS (PART III – A)

We continue with Step 24 of the Elcano ship model instructions for its assembly. This is about ‘Decks – Part III’.

Take two M8 parts and glue them parallel to the foredeck as shown on the video. Next, take ten units of the part DM4. With the help of cyano and grip pliers, take five of these and glue each one next to the other on the deck area shown. Then turn the boat 180º and do the same for the other five on the other side of the deck.

Once this task is done, take a Stainless Steel Ruler 150 mm (27069). Use it to mark with a pencil on the edge of the hull two points with an equidistance of 18 mm. From each of these two points, with the ruler, measure and mark two points 6 mm inside the deck. Drill with a small hand drill at the two points marked on the deck.

Take an M6 part. Apply a drop of cyano and insert it with tweezers into one of the two holes made. Repeat the process with another M6 part and insert it into the other deck hole.

JUAN SEBASTIAN ELCANO MODEL SHIP: DECKS (PART III – B)

It is time to use thread part CT2 for the placement of part P2, previously painted with Off-White Acrylic Paint (27702). First, thread the thread through the two holes in part P2. Second, take the other end of the thread and feed it through an M6 part. Do the same with the other end. When you are inserting the two ends of the thread into each M6 part, insert them from the outside to the inside.

Next, make a knot in each of the two inserted ends so that the part P2 does not come loose. Apply a little cyano to each one. Repeat the process on the opposite side of the boat.

JUAN SEBASTIÁN ELCANO ASSEMBLY: HANDRAILS AND PROPELLER

The ‘Handrails and Propeller’ is Step 25 of the video tutorial for building the model of the Elcano ship. Take two PE3 parts, previously painted with off-white paint. Apply cyano to each of the tips of the base that will be inserted. Place each of the two PE3 parts on the edge of the hull and the deck with the help of a Curved Fastening Tweezers (27021). There are two in the bow.

Then, take a PE4 part, also previously painted with off-white colour. Bend it with your hands so that it takes on the curved shape of the stern. Once you have the shape, apply cyano to each of the corners and glue the part with both hands to the edge of the deck. Take another PE4 part and tack it right next to the one you placed earlier. Put it behind the lifeboat. Repeat the process on the other side of the hull.

Finally, the part M11 -propeller- enters the scene. Apply cyano to the tip to be inserted and place it with your hands and a pair of tweezers on the hull.

JUAN SEBASTIÁN ELCANO ASSEMBLY: LAST DETAILS TO FINISH (PART I)

We continue with the final step of the Elcano ship model instructions for its assembly with the ‘Last Details’, which is Step 26. Arrange a unit of the part WD3 with a diameter of 2×35 mm, previously painted off-white. Later, take the part FL1 -Spanish flag- and with the help of a cutter, remove the sticker protector.

Place the center of the sticker -it has a stripe drawn- on the stick and close the sticker with your hands and the handle of a scalpel cutter until both sides of the flag stick together. Stick it in the hole in the aft deck provided for it.

It is the turn of the part PE5 Elcano / PE6 Esmeralda -metal sheet with the name of the ship-. First, paint it with Hull Green Colour (27751). Then, sand the entire edge of the sheet with a utility cutter until you can see the metal of the sheet. Apply cyano and glue it to the stern of the boat, just below the flag.

JUAN SEBASTIÁN ELCANO ASSEMBLY: LAST DETAILS TO FINISH (PART II)

Now, take the two parts M17 -anchors-, previously painted with Off-Black Colour (27703). Place them into the two holes provided for this with the help of tweezers and a few drops of cyano. Finally, there is the part PE7 / PE8 -name of the ship for the base-. Also paint it with off-black colour, sand the edges with a cutter until you see the metal part and, with cyano, glue it to the exhibition base.

You have just finished building the wonderful model of the training ship Juan Sebastián Elcano / Esmeralda (22260)! Congratulations!

*Model Ship Elcano / Esmeralda Built by our modeling friend Girish Khandagale.*

We remind you that you can also purchase the Elcano Gift Pack (22260L), which includes the kit with the schooner sailboat, its paints and some tools. It has a lower price than if the products are purchased separately.

Read the third part of the post…

Model Building Tips

Mississippi Model Set Up (II): Video Tutorials to Assemble the Wooden Paddle Steamer

Posted on May 19, 2022May 24, 2022 by Administrador DelBlog

We continue with the ‘Model Building Tips’ section and with the second part of the video tutorials for the set up of the King of the Mississippi model (20515). The wooden naval modeling kit of the paddle steamer at 1:80 scale represents a faithful replica of the original model. The assembly of this classic North American wooden boat from the 19th century is aimed at modelers with an intermediate level of skills on naval modeling.

On this post, first, our team of modelers will show you how to assemble the columns and the railings of the second deck. Second, how to work the windows and the doors. Then, how to handle and place the high-quality photo-etched decoration parts. Next, we will show you how to make the capstan base. And finally, our modelers friends will know how to decorate the chimneys of the steamboat. These videos are a great help during the construction of the King of the Mississippi model. Especially the most difficult parts. Go for it!

MISSISSIPPI MODEL SET UP: SECOND DECK COLUMNS AND RAILINGS

We pick up the video where we left off a week ago, when we built the columns and railings of the first deck. On this occasion, we turn to the existing ones on the second deck of the American paddle steamer scale model. This explanation corresponds to Section 14 of the digital instructions. We remind you that you can download them for free in the same product file of the King of the Mississippi.

Apply cyanoacrylate (27650) on one of the wooden columns of the railing. With the help of a reduced size square or bevel (27325), manipulate it until it is completely straight on the second cover, nothing crooked. Repeat the process with the remaining columns -four more- as shown on the video, placing them on the place provided for it. Obviously, before gluing them, they must already be varnished.

Next, we take the curved wooden base of the railing, apply cyanoacrylate to it and adhere it to the front space between the two columns. Help yourself with some straight tweezers (27204) for this whole process. Remember, beforehand, do not varnish the part where you are going to put the glue. Once your photo-etched railing is painted, add a few small drops of cyan to different spots on its underside. Using the same tweezers, carefully place it between the two columns. On top of this, take the wooden upper part, the handrail with the tweezers, paint it with cyan too and fix it to the upper part of the railing. Do the same process with the other curved railing and with the two straight sides. The result should be this:

WINDOWS AND DOORS ASSEMBLY SECOND DECK OF KING OF THE MISSISSIPPI

On this seventh video, another of the important processes for King of the Mississippi (20515) model set up. Specifically, the assembly of the windows and doors of all the rooms on the second deck. On the digital instructions, steps between 13 and 24 of Section 15.

Take a pointed needle nose pliers (27213). Fold the tabs of the photo-etched parts of the windows and doors. Paint them with brush and with acrylic water-based paint burnt umber color (27743). Help yourself to grab the part of nails with precision straight pliers (27204). With these, go placing each of the windows and doors. Gently press with your hands to make the lashes fit. Apply cyan to the back of the window and door for a stronger hold.

Work the photo-etched parts from the doors of the windows. Paint them with buff acrylic paint (27740). Use the aforementioned tweezers to make the task easier. With a brush very fine size 000 (17200C), burnt shadow paint, draw the grids on the front. Apply cyan to the back, where you haven’t painted, and using precision straight pliers, glue them to each of the sides of the window. Repeat the process with all the rest. Once they are in place, paint all the interior frames of windows and doors with a brush and burnt umber paint.

Finally, take the different acetate parts -there are six- and check that the size is correct. Put cyan on the wood, on the wall inside of the rooms, and glue the acetates with the tweezers and hands. To put the acetates on the curved parts of the bow and stern, use in this case a curved tweezers (27021).

It should look like this:

MISSISSIPPI MODEL SET UP: PHOTO-ETCHED DECORATIONS

We continue with the following video tutorial for the construction of the model King of the Mississippi (20515): photoen-etched decorations of the fourth deck. These steps appear on Section 21 of the digital instructions.

Paint them with a flat brush and off-white water-based acrylic paint (27702). Once dry, glue them with cyan and the help of your own hands on the wooden plank of the fourth deck -where the coffer goes-. Before joining one part to another and adding cyan to adhere them, file with a mini diamond file (27015-3) a little the extremes that will be fixed with the others. Repeat this action. When you have to put the last part, if you have left over because it is too long, mark with a pencil where you should cut it. Cut it with a cutting pliers (27211), file and glue carefully. Put cyano on all the balustrade supports and remove the excess with the point of a scalpel cutter (27019). Now, paint all the joints of the different parts with off-white color.

Apply cyano all over the edge of the deck wood plank where you are going to glue the wooden parts on the lower part of the balustrade. Take that base part in wood, previously painted, and glue it under the already placed photoengraving. Repeat the process with the other parts.

Once it is finished, it should be like this:

CAPSTAN BASE OF KING OF THE MISSISSIPPI MODEL SHIP

The ninth tip that we show you for the set up of the wooden model of the paddle steamer King of the Mississippi (20515) is the building of the capstan base. Steps 1-4 of Section 29 on the digital instructions. Let’s continue with this classic jewel of the ship modeling that It reminds us of literary characters like Tom Sawyer and Huckleberry Finn, by Mark Twain.

Take the parts and paint them with a flat brush and off-black acrylic paint (27703). Use some precision straight tweezers (27204) to hold parts while painting. Glue a strip -previously painted- completely centered on the cover. Use a small centering ruler (27326) to make sure it sits perfectly straight in position. Next is the small star-shaped base part of the capstain. When it comes to gluing the four ribbons on cross shape and the rest on the shape of a star, also use an tiny square (27325). This way everything will be uniform. Continue repeating the process as seen on the video tutorial. Lastly, paint the edges of the star-shaped base part of the capstan with off-white.

When the modeller have done the task, it should look like this:

MISSISSIPPI MODEL SET UP: DECORATION OF CHIMNEYS

The tenth and last video tutorial refers to the decoration of chimneys. Steps 15 and 16 of Section 33 on the digital instructions for the set up of the magnificent wooden model of the King of the Mississippi, at scale 1/80 (20515).

Fold the photo-etched part look like some poles with the help of a flat-pointed grip pliers (27213). Give it a round shape, for example, using the handle of the scalpel cutter and your own hands. Using some curved fastening tweezers (27021), insert it into each of the two chimneys through the ‘rings’ half-closed you just created. Glue the part with cyanoacrylate so that it is completely fixed by pouring it on the inside of the aforementioned rings.

The end result should be similar to this:

We hope that these video tutorials that guide the modeler through some of the most precise or difficult parts of the assembly will help. Do not forget that you have, for sale separately, a King of the Mississippi Set of 18 Metal Figures (20515F) that will give life to your paddle steamer model. Likewise, you can also acquire the Specific Acrylic Paints Set (277PACK6) for this model, and forget about having to look for them.

Finally, if you want to have everything your modeling kit needs, treat yourself or surprise a loved one who loves naval modeling with the King of the Mississippi Gift Pack (20515L), which includes the model, the figures, the paints and some tools.

Read the first part of the post…

Model Building Tips

Santa Maria Model Assembly (I): Build the Caravel in Wood with Our Help

Posted on March 3, 2022March 28, 2022 by Administrador DelBlog

Our ‘Model Building Tips’ section of the blog helps our modeling friends know how to build many of our scale models and to manipulate the tools. In this case, we are going to show an audiovisual guide for the Santa Maria model assembly at 1/65 scale (22411-N). The wooden caravel with which Christopher Columbus discovered America. Surely, it is one of the best-selling faithful miniature replicas in the world every year.

So the Artesania Latina‘s modelers team has created a series of video tutorials at our YouTube Playlists. Not only the assembly of the Santa Maria model, but also many others ships and airplanes. We are going to explain to you from now how to work with the most complicated parts to execute during the construction process of the famous caravel -it really is a nao-.

SANTA MARIA MODEL ASSEMBLY: SIDE WALLS AND BOW PARTS

In this Chapter 1 of the fifteen included in this assembly guide of the Santa Maria model (22411-N) we are going to deal with the ‘Placement of the Side Walls’. For this step, the modeler needs quick drying dense cyanoacrylate (27650). The cyano applicator is included in this set (27302). Once applied, you must press the wooden part until it is fully adhered. Start with the central part to later glue the back and the front.

We go to the bow from Chapter 2 with the ‘Forecastle Bulkhead Planking’ of this guide for Santa Maria model assembly at 1/65 scale. The modeler must once again use cyanoacrylate, in addition to any universal cutter (27044) from our catalog of cutting tools for modeling. In this way, you will be able to cut the leftover wooden parts once they are glued.

We continue on the bow assembly of Santa Maria caravel scale model with Chapter 3 and the ‘Bow Deck Outline’. Prior to placing the three parts, modelers must first paint or varnish them with our brushes and airbrushes. After painting them, you must cut the corners diagonally with the cutter so that they fit perfectly when gluing them with cyanoacrylate.

Chapter 4 deals with ‘Bow Deck Assembly’. Before putting the part that you have made in the previous step, place without glue the two wooden cylinders that serve for its proper positioning. Apply cyanoacrylate to the entire frame or edge of the bow deck and insert the piece. Press it without excessive force until you notice that it has adhered. Carefully remove the two cylinders.

SANTA MARIA CARAVEL CONSTRUCTION GUIDE: RUDDER AND DEADEYES

The Santa Maria model assembly, a 1/65 scale model by Artesania Latina, now focuses on the rudder. Specifically, Chapter 5 shows the ‘Rudder Hinges Placement’. Mark with a pencil the places where you want to place the hinges. Take each of these and press it on the place you have marked previously until it takes the shape. Insert a punch through the hinge holes and make a small hole. By that same place and with the help of a professional needle nose pliers (27213) take one of the rivets or nails and insert it by pressing with the pliers. Once inserted, you can fix it better with gentle strokes using our modeler’s hammer (27017).

Continue by cutting three parts of wooden round dowels with a cutter. Use the glue applicator to put cyanoacrylate around these. Finally, insert them into the holes of the hinges with the help of some professional precision tweezers with ultra fine tip (27204).

It is time to watch the ‘Deadeyes Assembly in Chainwales’ in Chapter 6. Take a bolt with its metal part and apply cyanoacrylate on the metal. Place it and mark with a small drill where you want to place the nail. Then insert the nail with the pliers and press. Repeat the process with all the deadeyes.

SANTA MARIA MODEL ASSEMBLY: HANDRAILS AND BARRELS

The Chapter 7 teaches modelers how to set up the ‘Handrails’. Take one of these and mark with a pencil the leftovers that you want to cut so that the ends are diagonal for placement. Proceed to cut with the cutter. Sand these ends with the sanding block (27014) so there are no burrs. Apply cyan to the bases of the upright posts and glue the railing to the foredeck. Varnish it last.

The last video of Santa Maria model assembly that we watch in this post -we continue in the next one- is the one from Chapter 8: ‘Barrels Making’. Using a utility knife, split the barrel support part in two and remove any excess. Apply cyanoacrylate to the curved area of the bracket where the barrel sits. Peg the barrel into the bracket along one of the horizontal lines on the first. Do the same with the other barrel. Do the same process with the other piece of the bracket as well. With the help of precision pliers, take the thread and insert it through all the holes as a grip and decoration.

If you can’t wait for the next post of Santa Maria model assembly to start building it, we have a surprise for you. One of the news for 2022 on Artesania Latina catalog are the Gift Packs. In this sense, we present to all our modelers friends the Santa Maria Model Gift Pack (22411-L).

In addition to the 1/65 scale model of the Santa Maria caravel (22411-N), the pack brings a set of metal figurines (22411-F) and its specific paints set (277PACK8). As gifts, a bottle of white glue, sanding block, brush, tweezers and cutter. An unmissable opportunity!

Read the Second Part of the Post…