spanish archivos - El Blog de Artesanía Latina

Elcano Model Ship Assembly (I): Build with Us the Spanish Training Ship Model for Beginners

Posted on December 1, 2022February 1, 2023 by Administrador DelBlog

We are going to teach our modelers friends the assembly of the model ship Juan Sebastián Elcano (22260), the Spanish training ship that It is named after the browser that went around the world for the first time. Without forgetting Francisco de Magallanes, of course. We have decided that the best way to help the beginners modelers to assemble this faithful miniature replica is through video tutorials created by us. Thus, we accompany them during the construction process of this 1:250 scale model in wood and plastic, which can also be the Chilean training ship, Esmeralda. Decorate it however you like.

So, we begin the process of Elcano model ship assembly with the first thing to do when you have any naval modeling kit on your hands. Check its contents using the parts list. Normally, we include a few more parts than stipulated in case the modeler suffers a mishap with one during assembly. A part breaks, it is lost, the dog eats it, it inherits from a relative or, for example, the house floods. There are many reasons that we read from our loyal customers for more than fifty years. Pay attention to the video below.

We recommend that you specify if all the parts are inside the box. In the event that this model is missing something, which we do not believe is the case, do not hesitate to contact us to request it here: Spare Parts Service.

LET’S BUILD TOGETHER THE FIRST THING: EXHIBITION BASE

Now, let’s get down to business with Step 1 of the video tutorial. Let’s build the ‘Exhibition Base’ in wood to display the naval model of Juan Sebastián Elcano once assembled. By the way, when you finish it it will be 17.91” (455 mm) length, 10.03” (255 mm) height and 4.33” (110 mm) width. Take two 150mm length wooden round dowels (WD1) and remove the two base pieces (4) from the wooden plank.

Next, apply our cyanoacrylate for porous materials (27650), sold separately, on one end of the dowel. Insert it into one of the two holes on one of the sides that make up the base. So that everything is balanced, we recommend that you use our Micro Square, present in Micro Rules Set (27325), which is also sold separately. Repeat the process with the other dowel, inserting it into the other hole in the same base piece. All that remains is to apply adhesive to the other two ends of the round dowels and place the other part of the base into the two small holes. Make sure everything is straight and stable.

Let it dry for a few minutes to give it… The final touch! Paint it with brush. With what paints? You wonder. No problem. Artesanía Latina has created a Specific Acrylic Paints Pack (277PACK17) for the scale model of Juan Sebastián Elcano / Esmeralda. Add them to your shopping cart!

THE HULL OF JUAN SEBASTIÁN ELCANO

Step 2 of assembly of the model ship Elcano passes through its prefabricated ‘Hull’ made of plastic. We intend to make the initiation to this wonderful hobby of any modeler easier. Removed the headaches of building a hull out of wooden parts. For all these reasons, it is ideal for people who wish to assemble their first scale naval reproduction. Take the two parts that make up the hull and put cyanoacrylate on all the edges and lace areas of one of the parts of the helmet, so that none remain without glue. Carefully join them with precision and light pressure so that there is a single piece. The hull is already assembled!

Use a brush to apply a layer of white filler primer (27701) to make everything even, sold separately. The next task is to draw the waterline on the hull. On the video we show an artisan way of drawing it, however… We have another magnificent solution! Our new Waterline Marker (27649), do not hesitate to purchase it for your naval modeling workstation (27648).

It’s time to finish the hull. Paste japanese masking tape above the waterline drawn in order to paint the lower part of the hull, which remains submerged. Take the little jar of hull green paint and paint it with a brush, as we did, or with airbrush, however you like. Let it dry and after a few hours apply a second layer. Finally, remove the tape carefully and with a cutter remove any excess paint.

ELCANO MODEL SHIP ASSEMBLY: DECKS (FIRST PART)

From now on we are immersed in Step 3 of the assembly of the model of the ship that bears the name of the famous Juan Sebastián Elcano, the beautiful brigantine schooner sailboat. Touch the first part of their ‘Decks’. Take the parts 1, 2 and 3 of the deck that appear in the image. With the help of a pencil and a Micro Center Ruler (27326), mark and make a small hole with a drill 0.75 mm diameter in each of the points indicated on the video. Continue using a brush to paint the three parts with satin varnish, included in the paint pack.

Take part 2 of the deck and paint the two M1 elliptical parts with off black paint. Let dry and with some straight fastening tweezers (27020) apply cyano to each of the ellipticals and carefully adhere around each one of the two large holes. Use a rounded file to enlarge the two holes on which you have glued the parts. Remove the remains of sawdust and dust. Another stage of construction finished together!

ELCANO SHIP MODEL ASSEMBLY: DECK PLACEMENT

In Step 4 of the assembly of the model ship Juan Sebastián Elcano, let’s quickly see the ‘Deck Placement’ with which we have just worked. Take the three parts that make it up. Apply around the contour of part 1 -the one that goes in the center- cyanoacrylate and fix this by pressing it carefully. Then, do the same with part 2, the foredeck to which you have glued the two elliptical pieces, and with part 3, the stern.

Finally, take all the M2 parts from the kit, that is, the golden eyebolts. Put cyanoacrylate in each of these and insert them with a tweezers into each of the small custom-made holes on the deck you made on the previous step.

BUILD THE CABINS OF ELCANO MODEL SHIP

Step 5 of the assembly of the model of the Spanish training ship Juan Sebastián Elcano / Chilean Esmeralda refers to the construction of the ‘Cabins’. Place the part MD1 and the 4 units of the part MD2 on your work table, which by the way you can protect with any of our cutting mats. Paint all these parts with off white paint, leaving one side of each of these unpainted in order to for the adhesive to work. Then, remove from the plate one part 8 and 4 units of part 6. Apply cyano to the unpainted side of each part. Take part 8 and glue it on top of MD1, repeat the process with the 4 units of part 6 over the many others of the MD2.

Once glued, paint with off white the part of the 5 units that has adhered, since it was unpainted. Wait for it to dry. To finish, paint with sapele water-based wood stain the top of each cabin, which you previously glued and painted white. We remind you that all the paints, stains and varnishes that we use can be found in the Juan Sebastián Elcano Acrylic Paints Set (277PACK17), for sale separately.

JUAN SEBASTIÁN ELCANO DECK ELEMENTS

Using a cutter, extract the 10 units of part 7. We are on the video tutorial, Step 6, which deals with the ‘Deck Elements’. For now, easy for any fan who wants to get started in naval modeling, right? Let’s continue… Take two of those parts, and glue them together with cyano. Repeat the process with the rest of parts until, after gluing them, you are left with 5 units of part 7. Now, collect the following parts and arrange them on your work table. 5 units of the part M3, 1 unit of the part M4, 1 unit of the part M5, 8 units of the part M6, 4 units of the part M7, 2 units of the part M8 and 8 units of the part WS1 25 mm, in addition to the 5 units of part 7 that you already had.

Take those parts and glue them with a tiny dot of adhesive to a part of wood -so you don’t stain your work surface- and paint them off white. Proceed in the same way but with gold-colored paint with the 9 units of the part M9, the 4 units of the part M10, the unit of the part M11 and the 6 units of the part M12.

ELCANO MODEL SHIP ASSEMBLY: CAPSTAN

We focus on the ‘Capstan’, Step 7 for the assembly of the Elcano ship model made by Artesanía Latina. Remove from the kit the 2 units of part 9 and parts 10, 11 and PE1. Glue all of them with cyanoacrylate in the way shown on the video, pay attention to it. Use a brush to paint the glued part with off white color. Right after, do the same with gold color to paint the 2 units of the part M12, the unit of the part M13 and the 2 units of the part M14.

Once all the parts are dry, start gluing the metallic gold ones onto the white wooden part with some tweezers, stick to how it is done in the tutorial. Be patient with this step as precision and calm are required.

BUILD THE STAIRS OF ELCANO MODEL SHIP

We momentarily conclude this post for the assembly of the model of the Elcano ship with Step 8, ‘Stairs’. Get the part PE2 (6 units). With a Professional Needle Nose Pliers (27213) proceed to bender perpendicularly and very carefully the internal rungs. Also, bend the handrails -the sides of the part- inwards until there is a noticeable stair shape. Paint the staircase off white. Repeat the process 5 more times.

In the next post we will continue building together this magnificent model for beginners of the Spanish training ship Juan Sebastián Elcano (22260). Meanwhile, you can read more about this model in its specific blog post, watch its presentation on the video below and order it to assemble it now because it cannot be expected before so much desire. Start building it!

Read the second part of this post…

Ship Models

Santa Ana Model Ship in Wood at 1:84 Scale: The Return of the Acclaimed Naval Model Building Kit for Experts, Limited Edition Trafalgar 1805!

Posted on October 6, 2022October 6, 2022 by Administrador DelBlog

After more than six years of waiting and hundreds, if not thousands, of emails sent by our customers friends requesting a highly desired product from Artesania Latina, we are going to brighten your day! As a radiant novelty for 2022, we are excited to present you the new and limited edition of Trafalgar 1805 Santa Ana model ship (22905-N) at 1:84 scale, the faithful replica in miniature of the Spanish line ship with 112 cannons launched in the last quarter of the nineteenth century. And most importantly, an essential vessel in the Battle of Trafalgar between the Bristish Royal Navy and the Spanish Armada at the beginning of the following century. Of course, now we bring you a renewed ship model building kit aimed at elite modelers.

SANTA ANA MODEL SHIP: KIT CONTENTS OF SPANISH LINE SHIP

The renewed wooden naval modeling kit of the famous Spanish ship of the line Santa Ana at 1:84 scale was the prototype of a series of 8 identical vessels that would constitute the nerve of the Armada. The modeler will be able to find in this new limited edition of the kit hundreds of high quality parts such as strips, rods and sheets of solid wood and plywood of basswood cut by a precision laser. Also, a spectacular 373 x 110 mm brass photo-etched plate with the finest details such as lanterns, railings or details of the cannons.

Of course, pre-sewn sails made of cotton fabric -ready to be placed- and cotton threads of different colors and thicknesses. We cannot forget the acetates, the nets and the flags. As a bonus so that the model is perfectly displayed, like an artwork that it is, a wooden exhibition base with a metal plate.

With this Santa Ana model ship, you can represent the appearance and artillery of the boat correctly in the battle of Trafalgar. The crowned rampant lion figurehead is a new design. New artillery, corrected in scale and now much more detailed including photo-etched parts, has the howitzers that the ship carried in Trafalgar. The previous metal lifeboats have been replaced with a more realistic wooden construction.

Do you still need to see more to be amazed due to the beauty of the new Spanish ship of the line Santa Ana Trafalgar 1805? No problem. Just below there is a video in which you can watch all the contents, the so-called ‘unboxing’, of this spectacular wooden ship modeling kit.

RENEWED INSTRUCTIONS: STEP-BY-STEP MORE ENJOYABLE!

Once Santa Ana model ship (22905-N) is built, it measures 46.45” (1180 mm) length, 34.25” (870 mm) height and 18.11” (460 mm) width. Its design by means of false keel and frames brings its assembly closer to that of the real vessel. And how to assemble it? The modelers and 3D designers who work at Artesania Latina have redesigned all the old instructions. Colour arrives to the Spanish ship of the 18th century! Now, you will be able to appreciate the different assembly steps much more clearly. Languages? Spanish, French, Italian, English, German, Dutch and Russian.

The wooden ship model kit has an instructions DVD for computer (Windows and Mac). Clearing step-by-step photos, as well as demonstrative videos with some of the most important steps. Printed instructions are not included. Remember that you can also download for free the instructions on the product sheet of this model on Artesania Latina website. It should be emphasized that now it also comes with a special guide -annexes- to assemble and decorate the model as it was in reality the ship during the Battle of Trafalgar.

If you also want to see how Santa Ana model ship would look unpainted, with a more classic appearance, only with the sapele veneer, under these lines there are several photographs that show it, take a look at them!

PACK OF ACRYLIC PAINTS SANTA ANA

However, Artesania Latina modelers recommend to paint of the Santa Ana model ship with its Specific Water-Based Acrylic Paint Pack (277PACK22), for sale separately. The result of the finishes of the Spanish ship of the line will be much more realistic and visual. Quick-drying, the twelve different colors paints come in small 20ml pots. With off white, off black, bright red, FS11136 red, navy blue, ice yellow, chrome yellow, khaki yellow, cocoa, burnt umber and gold, your jewel of naval modeling will astonish anyone who sees it.

In short, built at the Ferrol Shipyards and launched in 1784, the Santa Ana was the first of a series of three-deck ships called the Meregildos. Captained by José Gardoqui, he intervened in the Battle of Trafalgar inflicting heavy punishment on the English ship Royal Sovereign. Attacked by several English ships, he was captured and later saved by the Rayo, Montañés and San Justo, who towed him to Cádiz in the middle of the night. He would end up sinking in Havana, where he had been sent to prevent Napoleon’s troops from capturing him. Now, you have the opportunity, once again, to build a fundamental piece of world naval history. Assemble this limited edition Trafalgar 1805 of Santa Ana model ship (22905-N). Just watch the video below to fall in love!

Ship Models

Galleon Model Kit San Francisco II: Know its Secrets with this Beautiful 1/50 Scale Wooden Section

Posted on December 16, 2021December 15, 2021 by Administrador DelBlog

Galleons appeared in the middle of the 16th century thanks to the Spanish Armada. For 150 years, they were the warships and transport par excellence. Its three deck levels, the richness of its equipment and its imposing and robust appearance make the Section of San Francisco II at scale 1/50 a wooden galleon model kit truly splendid. Discover all the secrets of the galleons!

The galleon model with the Section of San Francisco II from the 16th century is a fantastic naval modeling kit in wood aimed at beginners modelers. Building this scale model, the modeler can examine in depth the construction and structure of this Spanish ship. Best of all, you can see in detail all the elements that make up its three decks. This fact allows the fan of this hobby to get an idea of what life was like on board.

The central section of this galleon model shows the interior of the ship and wonderful details. Cannons and their metal bullets, gun carriages, buckets, casks/barrels, sacks, winches and bilge pumps, among many other objects of the time.

The faithful miniature replica of the Section of the Galleon San Francisco II has two bridge , since the lower deck lacks cannons. Latter was intended for loading and transporting food, gunpowder and other belongings. Once built, the scale model measures 4.72” (120mm) length, 26.14” (664mm) height and 12.28” (312mm) width.

CONTENTS WOODEN NAVAL MODELING KIT GALLEON SECTION MODEL

The wooden naval modeling kit with the San Francisco II galleon section model includes high quality parts for precise and friendly assembly. Among many other elements, it contains high precision laser cut board, noble woods, brass and die-cast parts and fabric, such as the adhesive fabric with the flag. Likewise, as a gift for our modeling friends, it includes a small exhibition base with a metal plate for display. In this way, the galleon model will shine in all its splendor at any of the rooms of your home, workshop or office.

For the assembly you can follow our complete full color step-by-step guide on DVD format for your computer. All stages of the assembly are perfectly reflected in these instructions by means of legends and visual explanations. The galleon model kit does not come with printed instructions because Artesania Latina is committed to the environmental preservation of our planet.

Also, its parts list is especially clear and pleasant. Instead of bringing only names of parts and their quantities, each element comes with the image that represents it. In this way, the task of recognizing the parts is made easier for the modeler who builds the model.

You can consult the contents of the naval modeling kit with the galleon model of San Francisco II Section thanks to the video below presenting the scale model made by Artesania Latina. Please note that only digital instructions are available now, it does not contain paper instructions.

The galleon model Section San Francisco II at 1/50 scale is one of the best rated by all modelers regardless of their origin. Dare to assemble the scale model of one of the naval historical gems!

Ship Models

Juan Sebastian Elcano Model: the Spanish Training Ship Sails the Seas for Beginners thanks to its 1/250 New Modeling Kit

Posted on November 18, 2021July 25, 2022 by Administrador DelBlog

We have redesigned and manufactured it again to delight lovers of naval modeling, especially for those who want to start in this wonderful hobby. Why? Because the renewed wooden and high quality ABS plastic ship model of the Spanish school vessel called Juan Sebastian Elcano is, in this way, the easiest to assemble of the entire market, so it is the perfect scale model for any beginner modeler to start over 14 years old. The new Elcano will provide you with a new mounting experience. Also the possibility of building either the aforementioned model or its Chilean brother Esmeralda. They are two of the novelties of the modeling kit!

It is a replica of the famous brigantine-schooner, whose name comes from the Spanish explorer who as captain gave the first round the world in 1552, having to replace Fernando de Magallanes. The ship modeling kit of the new Juan Sebastian Elcano model, designed by Artesania Latina, contains high-quality birch wood cut with laser and an one-part helmet made of ABS plastic for a less arduous assembly. Also, pre-cut sails to be cut and placed, cotton threads and many details in metal and photo-etched. We cannot forget a magnificent gift: a wooden base so that the scale model is perfectly exposed. With the name plates and the national flags of both Elcano and Esmeralda!

Discover all the contents of the wooden naval modeling kit of the Elcano and Esmeralda school ship by watching the video below. Take a look with us!

VERY DETAILED VIDEO INSTRUCTIONS: HELP FOR BEGINNERS MODELERS

To achieve this assembly goal, the modeling kit of the Spanish school ship also has new video instructions. The naval modeler can look at a simple step-by-step building process. With a large number of details so that the assembly of each thread, each block and each rigging is clearly explained without difficult texts full of technical words.

Our Artesania Latina’s modeler says that “this scale model is built quickly, if you work eight hours a day it will be finished in two or three weeks, if you pay less attention, in just over a month”. This manifestation makes clear that it is an ideal miniature for those who want to start in naval modeling.

MODELER SENSATIONS AFTER JUAN SEBASTIAN ELCANO MODEL SHIP BUILDING

The ship modeler in charge of Juan Sebastian Elcano model project states that “it is very simple to build because the monohull is already assembled, and even brings all the bull eyes already made” to which Rodriguez adds that “the only thing that you must do is to paint in white the whole helmet, and then draw the waterline in order to paint in green the lower part of the helmet, being of course important the placement of the propeller and the anchor, then paint them too “.

Artesania Latina’s friends will enjoy a lot when they have Juan Sebastian Elcano’s and Esmeralda naval modeling kit on their hands, but according to our modeler, they will have fun on the rigging building process: “It is very entertaining to assemble because you have to create a beautiful swarm of threads with object to keep the sails and the five masts upright and balanced in their exact positions, besides that previously the poles must be measured, cut, dyed and varnished, however, the modeler do not suffer during their placement thanks to a very well explained instructions”, the professional of this hobby says.

Speaking about the school ship rigging majesty, you can see on the image below the large number of sails in its five masts and its beautiful arrangement, for which “it has been necessary a multitude of threads, and a required, conscientious and very funny work of ‘surgery’, especially, with the transversal threads”, the modeler is showing us delighted. If you want extra help, you have specific Micro Tools for Rigging, for sale separately.

MORE PHOTO-ETCHED DETAILS: FANTASTIC ELCANO AND EMERALD FIGUREHEADS

The modeler points out that “several of the decorative elements on the deck of the Juan Sebastian Elcano model have been improved, as is the case of the stairs, the handrails, the anchors, the folded rescue boats and, apart, the exhibition base plate”.

These details are “more realistic and can be manipulated – the modeler continues – because they are manufactured in photo-etched, except lifeboats, which are now turned wood, while in the previous Juan Sebastian Elcano scale model all these were manufactured in die-cast, so the appearance was much coarser and less trustworthy”, the professional says. Elcano and Esmeralda figureheads “are wonderful“, she exclaims.

For more information about the wooden and plastic Juan Sebastian Elcano model (22260), please click here.

HISTORIA DEL BUQUE ESCUELA JUAN SEBASTIÁN ELCANO

In March 5th, 1927, dictator Miguel Primo de Rivera’s daughter, Carmen Primo de Rivera, launched Juan Sebastian Elcano school ship in Cadiz. Although the first name the boat received was Minerva, which is the goddess that appears in the figurehead, by Royal Decree in 1925, was renamed with its current name, after the owner of the shipyards, Horacio Echevarria, urged to Primo de Rivera to tell the monarch Alfonso XIII that he wanted it.

As a curiosity, its first trip was from Cadiz to Malaga with the king on board the ship. Then moved to Seville, through the Guadalquivir river, where an Ibero-American Exposition was held. It also passed through the Canary Islands and then went to Guipuzcoa, where it received the combat flag. In this trial period that lasted until 1928, always in Spanish waters, Juan Sebastian Elcano traveled 5,769 nautical miles in 57 trips, at an average speed of 4.2 knots.

Just after, it undertook its first instruction cruise around the world in the opposite direction that Elcano did in the past, starting from Cadiz on August 1st 1928, where it returned on May 29th 1929. Two midshipmen have provided more packaging and history to this vessel: King Juan Carlos I, in 1958; and his son and current monarch of the Kingdom of Spain, Felipe VI, in 1987.

FEATURES OF JUAN SEBASTIAN ELCANO TRAINING SHIP

Juan Sebastian Elcano vessel (and its Chilean brother Esmeralda) has the following measures: 4,452’’ in length and 3,704’’ without the bowsprit; 515.7’’ of breadth; 341.7’’ of depth; and 275.6’’ of draught and 1,917’’ of air draught. In this sense, its structure is distributed in four essential areas that are the Quarter Deck, the Forecastle, the Waist and the Poop. The back main mast, whose name is Asturias, is located on the Quarter Deck, a place where all the most relevant events tend to take place.

The two 1.45” (37 mm) cannons used for the salutes are on the Forecastle zone, where the bowsprit with the figurehead and where the workings are executed, without forgetting that just below are the lower decks, toilets and lockers. On the Waist we can meet the main front mast, called Almansa, and the foremast, called Blanca. What has been arranged in this part? The bridge, the radio and meteorological stations, the kitchen, the dining rooms, the operating room, the sick bay and the defeat rooms.

Speaking of its propulsion, Elcano has a total of 20 sails, covering a gigantic area of 3,151 square meters, however, it also has a diesel engine to be able to navigate with a power of 2,070 cv approximately, reaching speeds of up to 16.5 knots.

About its armament, Juan Sebastian Elcano school ship possesses 2 cannons of 37 millimeters, 2 Browning machine guns of 12.7 mm and 2 MG-1 machine guns of 7.62 mm. Its crew is composed of 197 people, of which 24 are officers; 22, non-commissioned officers; 146, sailors; and 5 civilians. In addition, it has capacity for up to 78 midshipmen.

JUAN SEBASTIAN ELCANO MODEL: IDEAL FOR NOVICE MODELERS

Juan Sebastian Elcano model school ship (22260) is, in short, the faithful miniature naval replica that any novice modeler should build. Once assembled, it has these measurements: Length 17.91” (455 mm) x Height 10.03” (255 mm) x Width 4.33” (110 mm).

On the video below, we present it in all its glory after being built.

Give the final touch to the scale model of Elcano and Esmeralda painting it with its Set of Paints, for sale separately. Perfect finishes!

In conclusion, with this fantastic naval modeling kit … You will have enormously fun and motivating times! Do not hesitate to give it to a family member or friend on these approaching dates. Or give yourself a gift! Start the path of naval modeling with us! Now you can also get the Juan Sebastián Elcano Gift Pack (22260-L). This fantastic product includes the model ship, the paints and the tools to help the modeler build it. At a cheaper price than if you buy everything separately. Take advantage of this opportunity!