El Blog de Artesanía Latina

HMS Victory Modeling Kit at 1/84 Scale: Spectacular and Faithful Anatomy for Expert Modelers of Lord Nelson’s Legendary Ship in the Battle of Trafalgar

Posted on October 29, 2024October 25, 2024 by Administrador DelBlog

When are you going to make the HMS Victory again? Our modelers friends asked us during these last years. Artesanía Latina team wanted to create a spectacular wooden model ship, that was not just another one, and we have achieved it. The fantastic review Anatomy of HMS Victory Modeling Kit (22900-OP) at 1:84 scale, Trafalgar 1805 edition.

This faithful reduced model of the English ship from 18th and 19th centuries perfectly represents the aforementioned legendary Lord Nelson‘s ship of the line. It is officially licensed by the British National Museum of the Royal Navy. It is, without a doubt, the most famous ship in sailing, the one that participated in the defeat of the Napoleonic -French/Spanish- troops in the Battle of Trafalgar. This fantastic miniature replica is aimed at modellers with an expert level of skills. It is truly a delight to build! We introduce you this model on the video below:

CONTENTS WOODEN SHIP OF THE LINE: ANATOMY OF HMS VICTORY MODELING KIT

Build your Anatomy of HMS Victory modeling kit at 1:84 scale, English ship of the line from the 18th and 19th centuries. A fundamental jewel for naval modeling, a beautiful challenge for modelers with greater knowledge of this beautiful hobby. Its assembly system using a false keel and frames also brings its construction closer to that of the real ship. In addition, it is important to highlight that it includes all the interior detail on all its decks, visible through the open right side of the hull.

This reissue of the naval modeling kit with the maquette of HMS Victory contains high quality parts. More than 10,000 parts of high-precision laser-cut board, hardwoods, brass and die-cast. As well as copper lining for the hull, cotton sails hand-sewn and ready to be placed, cotton threads, flags and a wooden work base.

Also, it has a complete rigging, 104 fully equipped cannons – with five different types and a carronade -, figurehead and stern decorations, among others. Each element has been faithfully and specifically designed for this masterpiece. In short, the modeler will obtain with the acquisition of this HMS Victory modeling kit more than two thousand hours of entertainment at her/his workshop.

We remind you again, the immensity and variety of the details included in the different decks, such as, for example, the small boats and many others.

Likewise, it includes as a gift bonus a splendid exhibition base made in methacrylate with a die-cast gold-coloured nameplate to display this artwork.

We show you the complete HMS Victory modeling kit in detail on the video below:

HMS VICTORY MODELING KIT INSTRUCTIONS

For the assembly of Anatomy HMS Victory modeling kit, you can follow our complete step-by-step guide entirely on video -very easy to follow- which you can watch for free on our YouTube channel -click here-. You can also scan the existing QR code on the box. It will be like a masterclass carried out by our professional modelers.

The kit does not contain printed instructions. We include in the box a very useful printed summary guide to help you in the process of building the model. The summary guide also has the QR code.

Also, the plan and the parts list are printed. Likewise, it has a schematic plan of the masts and yards.

Once HMS Victory modeling kit is built, the faithful miniature replica measures 47^5/16”(1,202 mm) length, 18^1/2”(470 mm) width and 31^11/16”(805 mm) height -34^7/16” or 875 mm with the base-.

FINISHES OF HMS VICTORY MODELING KIT: PAINTS AND LED LIGHTS

Complete your wooden model of this beautiful ship by obtaining the best finishes for your HMS Victory at 1:84 scale by painting it with HMS Victory Specific Paints Set (277PACK11), sold separately.

Remember that, as the boat is prepared to be illuminated, the model can come to life even more with the installation of our LED Lighting Set for Anatomy of HMS Victory (22900-LED), available separately and soon.

LIFE AND REALISM FOR THE MINIATURE REPLICA: TWO NEW SETS OF FIGURINES

Bring to life and realism to your miniature replica of HMS Victory with two fantastic new 1/84 scale figurine sets, soon available separately. On the one hand, the Set of 19 Metal Figurines of the British Royal Navy (22900F1) with Horatio Nelson, 5 officers, surgeon and 4 soldiers. In addition, you can even represent the ‘Death of Nelson’ scene with 8 other additional figurines that it comes with.

On the other hand, the Set of 19 Metal Figurines for Ships: Sailors from 1700 to 1815 (22900F2) with 5 gunboats, 11 sailors, 2 cabin boys and a cook. An additional crew directed to the HMS Victory modeling kit, as well as miniature replicas of the Cutty Sark, San Juan de Nepomuceno, Santa Ana and Santísima Trinidad, among others. It can also be used for naval models that have the same scale and are from the same period – 18th century and early 19th century – if desired. Measurements of all figures in both sets: around 0.78” or 20 mm.

HISTORY OF THE MOST POWERFUL SHIP OF THE WORLD, THE ONLY ONE STILL IN ONE PIECE

Currently, it is in a dry dock in the port of Portsmouth (Hampshire) in England as a museum piece. The English ship HMS Victory remains the flagship of the Second Lord of the Sea. It is even more important because it is the only ship of the line that has survived to this day in conditions faithful to the originals.

HMS Victory was launched in 1765. The rest of the works such as the rigging, the sails and the armament were progressively completed until in 1778 the ship of the line could be in active service. Specifically, this was a first class ship. The initials of this famous ship refer to “His/Her Majesty’s Ship.” In this case “His”, since the ship first sailed during the reign of George III of the United Kingdom and Ireland (1738-1820).

HMS VICTORY IN THE BATTLE OF TRAFALGAR

HMS Victory soon participated in its first battle, in 1778. Loaded with 104 guns and under the command of different commanders, this three-decker British ship of the line lived through several wars and had various functions. For a few years it became a hospital ship for Spanish and French prisoners of war. It was not until 1805, at Cape Trafalgar, that he achieved worldwide fame for leading the English fleet to victory.

Two years after being assigned to command HMS Victory, vice admiral Horatio Nelson was the leader who participated in the aforementioned Battle of Trafalgar. It was the most decisive of the Napoleonic Wars.

Thirty-four Franco-Spanish ships encountered a much stronger and better prepared British Royal Navy. The defeat was imminent and indisputable. The fleet led by Vice Admiral Nelson won the most important battle. It was the beginning of the decline of the French emperor in Europe.

Vice Admiral Nelson, however, never knew his victory. During the heat of battle, he was shot through his spine and ended his life a few hours later, becoming one of Britain’s greatest war heroes. This battle was the one that put an end to the French and Spanish navies. The United Kingdom would assume maritime supremacy, which would last until World War II.

Now, you have the great opportunity to build this great 1:84 scale model Anatomy of HMS Victory (22900-OP) on our new Modeler’s Workshop (27648-N), sold separately.

Ship Models

Pen Duick Sailboat Model: The Renewed Modeling Kit of the Éric Tabarly’s French Racing Cutter, One of the Best Sailors in History

Posted on September 4, 2024September 10, 2024 by Administrador DelBlog

It was mandatory that one of the most beautiful sailboats in the world return to our catalog. It is done. The Pen Duick sailboat model kit (22418N) made in wood at 1:28 scale is now in our warehouses. Completely redesigned, even the smallest detail, by our modelers. It is an amazing miniature of the French racing cutter that belonged to the famous sailor Éric Tabarly. This boat was a regular winner in many competitions. It is a reference boat in the history of this nautical sport. Now, Artesanía Latina presents you exclusively and with the official license from the Pen Duick Association this magnificent naval modeling kit. Below you can watch this ideal model on video:

It is a fantastic, detailed and faithful naval replica miniature in wood of one of the most elegant sailboats in the world. Now, you can enjoy the assembly of this 2024 kit for intermediate level modelers.

CONTENTS NAVAL MODELING KIT SAILBOAT MODEL PEN DUICK

Here, the naval modeling kit with Pen Duick sailboat model, an extraordinary racing cutter. It brings a completely redesigned model that reproduces the ship down to its smallest details. The deck is finally laser engraved, offering a magnificent finish and a very realistic look. It contains all the parts so that the modeler can build the model: laser-cut structure on basswood plywood offering a very high-quality appearance and precise assembly, complete fittings in solid wood, brass and die-cast. A large brass photo-etched sheet contains numerous details. The deckhouses are veneered in American oak wood, and the cotton sails are engraved and ready to be installed. As a bonus gift, beautiful wooden exhibition base to assemble with the nameplate of the boat.

If you build the Pen Duick sailboat model, you have our complete step-by-step video instructions, as a masterclass taught by our modelers. Watch the video instructions scanning the QR code that comes with the box with any mobile phone or tablet, an action that takes you to our Youtube channel. Its construction system using false keel and frames brings the assembly of the model closer to the real construction of the boat.

On the one hand, the kit does not come with printed instructions. On the other hand, it does include a printed plan, the parts list with pictograms to facilitate the identification of parts during the construction of the model, and the rigging. Once built, the model measures 550 mm long, 765 mm high and 94 mm wide.

PAINTS FOR PEN DUICK SAILBOAT MODEL KIT

Paint your model of the Pen Duick sailboat with our Specific Set of Acrylic Paints (277PACK32), for sale separately. This contains 6 jars of different paints, each with 20 ml of product. In this sense, it includes the following colors in paints: Off-White, Off-Black, Burnt Umber, Pen Duick Green, Gold and Bright Red.

Now also, another new product so that your Pen Duick model is perfect: the Clear Bright Acrylic Varnish (27604). Don’t hesitate to add it, sold separately as the paints set!

ONE OF THE SAILBOATS WITH THE MOST VICTORIES IN RACING AND WITH THE MOST RECORDS

Discover the beautiful model of the Pen Duick sailboat, new 2024 model kit and made of wood of the well-known French racing cutter that won in numerous competitions during the 20th century. Likewise, it is a historic vessel because it set many records, led by its captain Éric Tabarly, one of the best sailors in history. Born in Nantes in 1931, Tabarly developed from his childhood a great passion for the sea and navigation. His life motto was the following: “Man needs passion to exist”. Pen Duick is the name of his first boat, a gift from his father, which means ‘Little Black Head’ in Breton. It is also the name of its different sailboats, from the Pen Duick II to the Pen Duick VI.

He entrusted the Pen Duick to the Costantini shipyard of La Trinité-sur-Mer to evaluate the work to be carried out. The hull of the sailboat was rotten to repair traditionally. Unable to finance the work, he proposed Marc and Gilles Costantini take on an unprecedented challenge to save his boat: rebuild a new hull by applying seven successive layers of glass fabric and polyester resin, using the old hull. as a mold. Polyester construction was in its infancy, such a large and heavy sailboat had never been built before. It was the largest hull of its type at that time. The ship was renovated in the old-fashioned way at the Raymond Labbé shipyard in 1983 in Saint-Malo, and celebrated its centenary in May 1998.

On the night of June 12th to 13th 1998, Éric Tabarly died after falling into the sea during a voyage to Ireland with his beloved Pen Duick. He always opposed his sailboat being classified as a ‘Historical Monument’.

BUILD THE MODEL OF THE FRENCH RACING CUTTER PEN DUICK

Continue evolving in the art of naval modeling building the model of the sailboat Pen Duick at 1:28 scale (22418N) for modelers with an intermediate level. Or you can simply assemble this faithful miniature replica because you think it is so nice and so unavoidable that it should be part of your own museum of historical naval models.

Also, you can purchase, for sale separately, the Gift Pack of Pen Duick Sailboat Model (22418-L). This includes the model, its specific paints and some tools that can help you in the model construction process. This pack is cheaper than if you buy the products separately. Take advantage of this extraordinary opportunity!

Modeling Tools & Accessories

Modeling and Crafts Tools: New Products to Make Assembling Models a Much More Enjoyable Hobby

Posted on May 31, 2024May 31, 2024 by Administrador DelBlog

At Artesanía Latina we strive every day to expand our catalog with new products that our modeler friends like. This is the case of our gamma of tools for modeling and crafts, essential tools to make building models a very fun hobby. If you want to make this hobby more enjoyable and so that you can work more precisely, discover the latest novelties from recent months. They are indispensable during the construction or creation process.

MODELING AND CRAFTS TOOLS: BASIC SET N2

The second basic tools set for modeling and crafts (27003-N) brings the tools to build your ship models, airplanes and trains, in addition to any type of crafts, with greater ease: includes cutter n1, straight fastening tweezers, sander dowel, flat and round brushes and flat file.

Modeling Cutter No. 1 is an essential modeling and crafting tool with as many uses as you can imagine. With the flat and round brushes, you can paint in detail and on the model in general. The straight fastening tweezers offers multiple uses related to the placement of small parts and threads. Thanks to the flat file, you will remove excess and/or burrs from wooden and plastic parts. And finally, with the sanding block with rounded and sharp shapes you will easily sand these shapes.

MODELING AND CRAFTS TOOLS: PACK MAGNETIC NAILER WITH NAILS

One of the recent novelties of our firm in terms of modeling and crafts tools is this magnificent pack with the magnetic nailer and nails for wooden modeling (27023-1), especially naval. It is a simple hand tool with which the nails are quickly and easily driven in during the hull construction process and when fixing the deck elements. Also, it includes 100 brass nails of 5 mm and 10 mm. The magnetic nailer is essential for the modeler.

With moderate pressure from the Artesanía Latina magnetic nailer, the nail can be placed straight and precisely.

Don’t know how to use the magnetic nailer? Here you can see it on video:

MODELING AND CRAFTS TOOLS: MICRO PIPE BENDER 2 MM

We present to you one of our modeling and crafts tools. The Micro Pipe Bender 2 mm (27323) outer diameter. Made of high quality photo-etched and brass, it lets you to build your models in the most appropriate way. The tube bender is ideal for comfortable and easy work with cylindrical parts of scale models and crafts. A magnificent example of its usefulness is that it allows you to replace the wires that hold the lanterns of naval models with the tube and run the cables, so you can put light on those lights.

If the modeler bends a tube directly, it is clamped and does not bend, thus blocking the interior and leaving a bend that prevents any object from passing through the interior of the tube. With this fantastic Micro Pipe Bender, you can bend them and give them a curved shape, so the interior is free, not hindered by the passage of any object that is introduced.

How this product is assembled and how it is used? We have recorded this step-by-step video thanks to the team of our modelers:

ERGONOMIC HOBBY KNIFE N5 WITH 6 BLADES

Cutter N5 with ergonomic handle and six blades -five different ones- (27047) for tasks related to cutting model parts or other small-sized objects. This new tool for modeling and crafts such as work with paper, cardboard, plastic and electricity.

It facilitates cutting with absolute precision and comfort. Made of high-quality metal and reinforced plastic for durability, the cutter includes a protective cap to prevent cuts when not in use.

Watch the unboxing of this product and some examples of its use on the video below:

SUPPORT FOR PAINTING SCALE MODEL FIGURES

The last one of the new modeling and crafts tools that we show you is fundamental if the modeler wants the finishes of the figurines to be optimal. With the wooden support for painting figures (27640) you can characterize with the appropriate colors, comfortably and without getting your hands dirty with paint, the figures of each scale model that you have built. Assembly required.

It is composed of 20 plywood discs with a diameter of 22 mm and 20 round birch wood rods with a diameter of 10 mm and 45 mm length. The support requires assembly, so we also recommend the use of cyanoacrylate (27621) or white glue (27602), depending on how quickly you want the adhesive to dry. If the modeler takes care of the support, it can be used on numerous occasions even if it gets stained with paint and glue.

Next, we show you on video how to easily paint the figures with this great and creative product:

Ship Models

Model Ship Medium Skills (II): Más Kits de Modelismo Naval en Madera con Modelos Históricos para Ensamblar

Posted on May 3, 2024April 30, 2024 by Administrador DelBlog

We continue the breakdown of the catalog from the previous post. Get to know each wonderful medium skills model ship kit that you can build with your own hands. Artesanía Latina exists to fulfill all your modeling desires. Therefore, do not hesitate to also take a look at all the tools and accessories that can be helpfully to you.

MODEL SHIP MEDIUM SKILLS: WOODEN FISHING BOAT MARE NOSTRUM (20100N)

The Mare Nostrum is a classic fishing boat from the Mediterranean Sea, from Arenys de Mar, Spain. With a length of 15 meters, a beam of 3.5 and a displacement of 10 tons, this boat was powered by a 40HP engine. The Mediterranean trawlers are all similar, presenting small variations depending on their place of origin. It is an intermediate level boat model, but due to its details it will delight anyone who builds it.

The naval modeling kit of the Mare Nostrum contains all the necessary parts to build the model. In addition, it is equipped with boxes for fish, cabins, a detailed engine, a winch for collecting the cable, and at the stern, protruding from the hull, a rigging with pulleys to pass it during towing. As a gift, bring the wooden base for display along with a nominative plaque. Once completed, the model measures 16.14” (410mm) length, 10.62” (270mm) height and 4.13” (105mm) width.

MODEL SHIP MEDIUM SKILLS: WOODEN STEAMBOAT KING OF THE MISSISSIPPI (20515)

Our next model ship for medium skills modelers that we present to you is a steamboat. Built entirely of wood and equipped with boilers to move their iconic propulsion blades, this type of boat was the solution to transporting passengers and merchandise along the river until well into the 20th century. Steamboats played an important role in the development of the Mississippi River basin and its tributaries, allowing convenient transportation in both directions of the river. They helped reduce the immensity of America and as ‘theater ships’ they reduced the loneliness of this immensity. America is not just modernism: it is also romance and dreams!

The naval modeling kit of the King of the Mississippi includes all the necessary parts for its construction: parts of 8 sheets of high-precision laser-cut board, made of hardwoods such as birch and linden; and 2 large photo-etched sheets (294×156 mm and 257×122 mm) including many decoration details never seen before in die-cast and brass. Includes adhesive fabric flags and, as a bonus, the base with name plate.

Now, the model can come to life by purchasing two different sets of effects separately: Lighting Set for Models and DIY Projects (27590) and Motion Motor Set (27591) of the boat blades. Also, to make this faithful miniature replica come to life, you can add a figures set (20515F), sold separately. Once finished, the model measures 25.98” (660 mm) length, 7.55” (192 mm) heigth and 5.11” (130 mm) width.

MODEL SHIP MEDIUM SKILLS: WOODEN CARAVEL LA NIÑA (22410)

Our third proposal for a mid-intermediate level boat model is La Niña, one of the three Spanish caravels used by Christopher Columbus on the first trip to the New World in 1492. Built in the shipyards of the Port of Moguer (Huelva, Andalusia) a few years before the trip, it became the captain ship of the expedition after the Santa María ran aground. And now it will delight the most demanding modellers. The expedition left the Port of Palos for the Canary Islands on August 3, 1492. On this scale, the lateen sail that we represent in this model was transformed into square sails. After discovering America, La Niña would return with Christopher Columbus on board, reaching Lisbon on March 4 and finally the port of Palos on March 15, 1493.

Its assembly system using a false keel and frames, like the vast majority of Artesanía Latina’s scale models of boats, brings its design closer to that of the real ship. The modeling kit contains all the necessary parts for its construction: high-precision laser-cut board, birch wood and veneers, various photo-etched brass parts, cast and hand-sewn sails ready to be placed. As a gift, it includes the wooden base for display. After assembly, the model measures 16.33” (415mm) length, 4.37” (111mm width) and 19.48” (495mm) height. On the other hand, it can provide the model of this and the rest of the caravels with more realism even with the Set of 10 Metal Figurines at scale 1 :65 crew members, ready to be assembled and painted, sold separately.

WOODEN CARAVEL MODEL SANTA MARÍA (22411N)

The fourth proposal for a medium skills model ship is possibly the most important in history as it was the one in which Christopher Columbus was traveling when America was discovered at the end of the 15th century, specifically, in 1492. La Nao Santa María, incorrectly called ‘caravel’ because the other two smaller boats that accompanied it were, La Niña and La Pinta – although in the original documents all three were considered caravels – it was originally called La Gallega, whose owner was Juan de la Cosa.

This Santa María Caravel naval modeling kit contains all the necessary parts to build the model, and of the highest quality. High-quality light birch woods cut with precision thanks to the laser; magnificent details made of metal and photo-etched parts; unbeatable and reinforced sails with cotton fabric, ready to be placed – this model includes die-cut cardboard templates to be able to paint its characteristic crosses; and, as a gift so that the model is perfectly displayed, as a work of art that it is, a wooden pedestal with a nominative metal plate. After being built, its measurements are as follows: 19.80” (503mm) length, 10.39” (264mm) width and 19.60” (498mm) height.

MODEL SHIP MEDIUM SKILLS: WOODEN CARAVEL LA PINTA (22412)

The fifth option of model ship medium skills is the wooden kit of the caravel La Pinta. The fastest of the three caravels used by Christopher Columbus on the first voyage to the New World in 1492. Built in the shipyards of Palos de la Frontera (Huelva) a few years before the trip, it was the fastest of the three boats and often had to wait for the other two. The expedition with the three ships left the Port of Palos for the Canary Islands on August 3, 1492. The sails and rudder of La Pinta were repaired on this stopover, to finally depart for the New World on September 6. It was on October 12 when the famous cry of Rodrigo de Triana “Land in sight!” was heard from the La Pinta ship.

The naval modeling kit contains high-quality parts: high-precision laser-cut board; birch wood and veneer; numerous pieces in wood, metal and brass; pieces in high quality photo-etched brass; sails sewn by hand and prepared to be placed; cotton threads; full scale plan of the boat; and, as a gift, a wooden base to display the model once finished. Once its assembled, this faithful miniature replica measures 20.07” (510mm) length, 9.05” (230mm) width and 15.74” (400mm) height.

MODEL SHIP MEDIUM SKILLS: WOODEN BRIG HMS SUPPLY (22420)

The sixth alternative for those who intend to assemble a medium skills model ship kit is the wooden brig HMS Supply from the 18th century. It was an essential part of the so-called ‘First Fleet’ or First Fleet of the Royal Navy that colonized and founded Australia . HMS Supply was their oldest, smallest and fastest ship. Built in 1759 as a 175-ton armed vessel, she became the colony’s only link to the outside world after the loss of HMS Sirius in 1790. HMS Supply, precisely, was intended to be aship support for HMS Sirius(1786).

The modeling kit of the scale model contains high-quality parts. 6 wooden plates cut by high precision laser, 2 photo-etched plates in brass with numerous details -one of them smaller-, set of birch wood parts -veneers, strips and round rods, oak veneer, fantastic set of 11 sails sewn from cotton ready to be placed, cotton threads for maneuvering in different colors and thicknesses and flags.

Likewise, it includes as a gift bonus a stand with a nominative metal plate, 7 die-cast figures and strong>copper lining for the helmet. To work with copper on the boat, we recommend our 5 mm Micro Riveting Tool (27320), for sale separately. Once built, this faithful miniature replica measures 23.11” (587 mm) length, 11.10” (282 mm) width and 26.65” (677 mm) height.

WOODEN MODEL CHINESE JUNK RED DRAGON (18020)

The seventh option for an intermediate level boat model is the Chinese junk Red Dragon. Still in use in many parts of Southeast Asia, these vessels were used for both trade and war. The beautiful reeds, typical of the China Sea, were all the rage among leaders of the time such as Genghis Khan and Kublai Khan, who used them to try to conquer Japan during the 13th century. Appearance of reeds is documented around 600 BC. The hull lacks a keel and has a short stern. Its sails are made of thick fabric reinforced with reeds, which provides it with a lot of stability and thrust. It was one of the most used vessels for piracy on the coasts of Southeast Asia.

The modeling kit contains high-quality parts: high-precision laser-cut board parts, hardwoods, brass, cast iron and fabric. Once built, the model measures 18.89” (480mm) length, 5.11” (130mm) width and 17.32” (440mm) height.

MODEL SHIP MEDIUM SKILLS: WOODEN GALLEON SAN FRANCISCO II (22452N)

The eighth option is the intermediate level boat model galleon San Francisco II. The galleons were the ships more powerful of their time and backbone of Spanish maritime power during the 16th and 17th centuries. Galleons appeared around the middle of the 20th century. XVI, thus forming the main nucleus of the Invincible Army. For almost 150 years they were the ships par excellence thanks to their combination of great transport capacity and their firepower, which made them ideal for long voyages oceanic routes between Spain and the Indies.

The modeling kit contains more than 1,400 high-quality necessary parts for its construction. It comes with a laser-cut wooden structure, birch strips and sapele veneer, cotton threads, cotton fabric sails and flags ready to be placed, photo-etched decoration in brass to increase realism. And a spectacular free bonus on accessories! It includes a display base for the galleon with a metal nominative plate, and five wonderful figures also in metal to be painted. Once assembled, this faithful miniature replica measures 680 mm length, 240 mm width and 520 mm height.

Read the previous post here…

Ship Models

Ship Models Intermediate Level: Wide and Varied Catalog of Wooden Naval Modeling Kits (I)

Posted on April 26, 2024April 26, 2024 by Administrador DelBlog

Have you already built several beginner model boats and feel like you need to take the leap to the next level? Do you already know how to assemble a naval model in general and do you have basic knowledge of using tools? It’s your time to start building ship models intermediate level of skills, without a doubt. Artesanía Latina offers you, in this sense, a wide and varied catalog of wooden naval modeling kits so you can take the next step in your passion for naval modeling. For this reason, we break down in two posts which are each of the historical and high-quality naval scale models. Everything so that the modeler who wants to evolve his skills knows what he wants to set up as a new challenge.

SHIP MODELS INTERMEDIATE LEVEL: WOODEN AND ABS NAVIGABLE-SUITABLE R/C TUGBOAT ATLANTIC (20210)

We start the ship models intermediate level review with the wooden and ABS plastic model of the Atlantic offshore tugboat. It is a faithful replica of the tugboats of the 70s and 80s of the 20th century. It was an offshore tug, not a port tug, so it was prepared to withstand the most adverse weather conditions. Its entire structure was designed to be a stable and very manageable boat in the water, in addition to being able to tow large vessels such as oil tankers or cruise ships in open waters.

The Atlantic Navigable Naval Modelling Kit contains high-precision laser-cut board parts, hardwoods, photo-etched parts, brass and cast iron. It has numerous details in chemical trimming to be more faithful to the original boat. Likewise, the hull of the Atlantic tugboat is made of very high quality ABS so it can be easily converted into an R/C model by being more resistant and waterproof. Without forgetting that its interior is ready for the installation of the electrical system -not included-. The water cannons are designed to be usable – mechanism not included. Once built, the model measures 41.73” (1,060mm) length, 23.62” (600mm) height and 9.84” (250mm) width.

SHIP MODELS INTERMEDIATE LEVEL: WOODEN TUGBOAT SANSON (20415)

Tugboat from the 40s of the last century. Equipped with a powerful steam boiler of 2,000 HP, the vessel could develop speeds of 14 knots while coming to the rescue of much larger ships. In the mid-19th century, navigation experienced a great revolution. The main factor is the implementation of mechanical propulsion. As a consequence, ships gradually increase their size and displacement, losing in the process the ease of maneuvering in docks and ports. As a result of this, tugboats are born. New types of ships of small tonnage and shallow draft but with more than enough driving power and maneuverability to assist ships much larger than themselves.

The naval modeling kit of the Sanson tugboat includes all the necessary parts so you can build your model. 7 high-precision laser-cut plywood sheets, as well as birch slats and rods, and oak veneer. By the way, it is the first kit that contains oak veneer, Artesanía Latina being a pioneer in including this noble wood in any model on the market. In this way, the model is much more realistic, exclusive and avoids the use of wood from tropical forests. It also comes with 1 photo-etched plate with numerous magnificent details, as well as accessories such as die-cast pieces, brass rods, threads, wooden trim and much more. Once built, the model measures 23.81” (605mm) length, 5.11” (130mm) width and 13.47” (350mm) height.

SHIP MODELS INTERMEDIATE LEVEL: WOODEN DUTCH FISHING BOAT BOTTER (22125)

Our third proposal of intermediate level ship models is the Dutch Botter fishing boat model. These ships sailed for centuries in the shallow coastal waters of the Zuiderzee Sea. The crew, usually between 2 and 4 men, used to keep the catches alive in a livewell located in the center of the boat. Zuiderzee was a large inland sea north of the Netherlands. The completion in 1932 of a large dyke divided it in two, creating a large inland saltwater lake called Ijsselmeeer and adding the rest of the former inland sea to the Wadden Sea.

Its assembly system using false keel and frames, like the vast majority of Artesanía Latina’s scale models of boats, brings its design closer to that of the real ship. The modeling kit contains all the parts necessary for construction. High precision laser cut board pieces, fine woods, brass, cast iron and hand-sewn cotton sails ready to be placed. In addition, it includes as a bonus a beautiful wooden base to build with a nameplate of the Botter fishing boat. Everything fits perfectly in this wonderful naval miniature. Once built, this faithful miniature replica of the Dutch Botter fishing boat measures 18.70” (475mm) length, 4.52” (115mm) width and 14.76” (375mm) height.

WOODEN MODEL ARAB DHOW SULTAN (22165)

The fourth proposal for ship models intermediate level is the exotic Arab dhow Sultan: traditional boat from the coasts of the Arabian Peninsula, India and East Africa. This ship was the primary instrument in trade and the spread of the Islamic faith. Likewise, the dhow was mainly used as a cargo ship, from grain and fish to slaves or minerals. Revolutionary in naval history due to its triangular sails and practically unchanged since its initial designs, it is believed that the dhow was the seed for the construction of the Venetian galleys and caravels, leading to the creation of larger ships with mixed sails.

Sultan is another fantastic ship scale model for modellers to move on to the second level of difficulty in building naval miniatures. Its simple construction system and simple sail make it easy to assemble this beauty of naval modeling. The modeling kit contains a set of high precision laser pre-cut board pieces, wood, brass and cast parts. Also, birch wood and veneer, high quality photo-etched brass pieces, hand-sewn sails and cotton threads. Without forgetting the stand-stand to display the model. Once built, this faithful miniature replica measures 15.35” (390mm) length, 4.92” (125mm) width and 17.32” (440mm) height.

SHIP MODELS INTERMEDIATE LEVEL: FRENCH WOODEN FISHING BOAT MARIE JEANNE (22175)

The fifth option for ship models intermediate level is the wooden model of the French fishing boat, the tuna boat Marie Jeanne. Dedicated to tuna fishing in the months of June to October, this fishing boat reached the coasts of Mauritania on trips of up to two months, since tuna are usually far from the coast. Leaving the French port of Concarneau, the Marie Jeanne sailed between 1900 and 1950. Tuna fishing requires strong and fairly fast boats. In the beginning, ships built for other purposes, generally too heavy, were dedicated to these tasks.

The naval modeling kit contains high-precision laser-precut board, noble woods, photo-etched parts, brass and cast iron. In addition to hand-cut and sewn cotton sails ready to be placed. As a bonus gift, it includes a wooden base with a metal nameplate so that the faithful miniature replica is perfectly displayed once assembled. The modeller can enjoy a much more enjoyable and easier assembly experience with this new scale model. Once the model is built, it measures 22.24” (565 mm) length, 4.52” (115 mm) width and 19.48” (495 mm) height.

SHIP MODELS INTERMEDIATE LEVEL: FRENCH WOODEN CORSAIR CUTTER LE RENARD (22401)

The sixth alternative for those who intend to assemble intermediate level ship models is the 1:50 scale wooden model of the French corsair cutter Le Renard. Launched in Saint Malo in 1812 by the famous privateer Robert Surcouf with the main objective to attack and capture the enemy trading ships of France. His actions and his legacy towards the city of Saint Malo make the Renard a symbol of the strong French naval identity. Le Renard was the last ship built by the famous Robert Surcouf. In September 1813 he accomplished his greatest feat by defeating the English schooner HMS Alphea in combat, turning the city of Saint Malo into a refuge for the families of the largest privateers in the world.

The scale model kit contains high-precision laser-cut board pieces, birch wood, brass, cast iron and sails ready to be placed. Also, base support with metal plate. Once built, this faithful miniature replica measures 24.21” (615mm) length, 9.37” (238mm) width and 22.04” (560mm) height.

WOODEN MODEL OF AMERICAN SCHOONER HARVEY (22416)

The seventh option for intermediate level ship models is the American schooner Harvey at 1:60 scale. Schooners are a type of sailboat defined by their rig. To a fast hull is added a sail that is also fast and has good ability to sail to windward. They were popular for many purposes, such as transporting cargo or fishing, as well as widely used by privateers. The Harvey is a new edition of this classic 19th century American schooner. It is reminiscent of the lines of the old coastal schooners of the 1860s in the United States that cannot be missing from your naval model collection.

The modeling kit contains high-quality parts such as precision laser-cut basswood plywood, brass photo-etched sheet with decorative pieces, sails with cotton fabric – ready to be placed- and cotton threads. As a gift so that the model is perfectly displayed, a wooden base with a nominative metal plate prepared to have light. The LED Lighting Set (27590), sold separately. With fine details on the deck and eight cannons. Once the Harvey model is assembled, it measures 26.77” (680mm) length, 19.29” (490mm) height and 9.84” (250mm) width.

SHIP MODELS INTERMEDIATE LEVEL: CANADIAN WOODEN SCHOONER BLUENOSE II (22453)

The eighth option is the wooden model at 1:75 scale of the Canadian schooner Bluenose II. The original Bluenose boat was built as a fishing and racing boat in response to the defeat of the Nova Scotia schooner Delawana by the Massachusetts-based Esperanto. After a life divided between racing victories and hard work fishing, the Bluenose found its final destination in 1946 when it ran aground on a reef in Haiti. There is also a faithful replica of the original built in 1964 that serves as an ambassador, symbol and tourist attraction of the city of Lunenburg, still sailing today.

The modeling kit contains high-precision laser-cut board pieces, fine woods, brass, cast iron, cotton threads and hand-sewn sails ready to be placed. The wooden model of the Bluenose II by Artesanía Latina is, without exaggeration, the best on the market. For its quality, details and for having by far the most complete step-by-step assembly instructions in seven languages and in full color in DVD format for computers -PC and MAC-. Once assembled, this faithful miniature replica measures 27.16” (690mm) length, 4.33” (110mm) width and 22.44” (570mm) height.

Soon, we will continue with a new and final post about the catalog of mid-level ship models. Naval modeling has two names: yours and Artesanía Latina.

To be continued…

Taller de Modelismo o Taller del Modelista (27648-N) de Artesanía Latina.

Modeling Tools & Accessories

Model Building Workbench: New Modeller’s Workshop or Organization Table for Tools and Accessories

Posted on April 1, 2024April 1, 2024 by Administrador DelBlog

A fundamental accessory for modeling -even more so for naval modeling– and for any type of craft. The modeler and the lover of other manual hobbies already have a product to have organized all the parts of their models, tools and other objects. Likewise, you can work on a stable surface, compact, resistant and light -it weighs only 1.5 kg- for assembly and creation. Discover the functional, portable and attractive Model Building Workbench (27648-N) from the Hobby Tools collection made by Artesania Latina. With this Modeller’s Workshop, you can keep the place where you work in order. But, in addition, it allows you to place your ship model firmly and correctly while you build it. There is a hull holder on the workbench!

ASSEMBLY AND MATERIALS FOR MODEL BUILDING WORKBENCH

The Model Building Workbench or Modeller’s Workshop made by Artesania Latina it is made of lime board, a particularly beautiful material, hard over time and not very heavy. To build it, we attach some very precise instructions. Of course, it is very easy to assemble because the parts of the board are cut by laser, they fit perfectly. Assemble it with the help of Cyanoacrylate (27650) and Spray Accelerator -you will obtain better adhesion- or White Glue (27602).

You can also leave it with its original appearance or customize it according to your tastes and imagination with some varnish or paint. Once built, its measurements are 16.25” (433 mm) width, 12.28” (312 mm) height and 9.05” (230 mm) depth. It fits anywhere at your own home or garage.

CRAFTS & MODEL BUILDING WORKBENCH COMPONENTS

The Modeller’s Workshop or Model Building Workbench has these components. On both sides of it, it incorporates a handle to be able to move it, change its location or transport it easily and comfortably. It is ideal that it is portable! Why not pursue your passion outdoors too!

Inside, fits all kinds of hand tools and a A4 Cutting Mat (27644).

It has 3 drawers made of transparent plastic for small parts or remnants. Likewise, a drawer made of wood for larger parts, tools and accessories.

On the sides, there is a dedicated space for magazines, instructions or (A4) catalogues. And also another one for wood, plastic or metal strips, and even the cutting mat.

Now, with wooden support for the tablet to be able to see the digital assembly instructions of any model, and with coaster to avoid staining the work surface with drinks.

In short, this portable modeller’s workshop or model building workbench can be used for hobbies other than modeling. Crafts, sewing, work with clay are some of these.

PAINT ORGANIZER: COMPLETE YOUR COMBO!

Complement your model building workshop! Add a model building product if you want organized paints, tools and brushes, use the Paints & Tools Organizer (27648-TP), for sale separately. Manufactured with the same material and quality so that it is combined with the modeller’s workshop itself. What’s more, you can snap it inside when you put it away.

Ship Models

HMS Supply Model Ship Kit, First Fleet 1797: The Fastest Boat that Conquered Australia Now at 1:50 Scale

Posted on March 20, 2024October 22, 2024 by Administrador DelBlog

It was one of the most successful reduced replicas for our modelers friends for many years and… Surprise! The splendid reissue of the 1:50 scale model ship of the Brig HMS Supply (22420), First Fleet 1797 edition is here. This faithful wooden model of the 18th century British ship perfectly represents the aforementioned legendary armed ship since it participated in the founding of Australia as a country establishing a colony. It was the fastest of the well-known First Fleet. Aimed at intermediate modelers, also highly recommended for those with higher skills. Everyone will love building it! Find out how beautiful model on the video below:

KIT CONTENTS OF HMS SUPPLY MODEL SHIP IN WOOD

Build your 1:50 scale model ship of HMS Supply, an English armed brigantine sailing boat from the 18th century. A fundamental jewel for naval modeling. Its assembly system using a false keel and frames brings its construction closer to that of the real ship.

This reissue of the model ship kit with HMS Supply brig contains high quality parts. 6 wooden plates cut by high precision laser, 2 photo-etched plates in brass with numerous details -one of them smaller-, set of birch wood parts -veneers, strips and round rods, oak veneer, fantastic set of 11 sails sewn from cotton ready to be placed, cotton threads for rigging in different colors and thicknesses and flags.

The HMS Supply model ship box comes with thread and brass rods, nails, eyebolts, rings, chain, aluminum parts, die cast parts -anchors, oars, rods, cannons, water pumps-, wooden parts -blocks, frames and beams-, turned parts and acetate.

Likewise, it includes as a gift bonus an exhibition stand with a nominative metal plate – it allows you to place both the boat and its boat -, 7figures in die-cast and copper lining for the hull. To work with copper on the boat, we recommend our 5 mm Micro Riveting Tool (27320), sold separately.

BRIGANTINE HMS SUPPLY MODEL SHIP KIT INSTRUCTIONS

For its assembly, you can follow our complete step-by-step guide entirely on video – very easy to follow – which you can watch for free at our Youtube channel -click here-. To do this, you can also scan the existing QR code on the box and on the parts list. It will be like a masterclass carried out by our professional modelers. The kit does not contain printed instructions.

The plan and the parts list are printed.

A paper template is included to help the modeler in the process of building the model. Once built, this faithful miniature replica measures 23.11” (587 mm) length, 11.10” (282 mm) width and 26.65” (677 mm) height.

FINAL FINISHES FOR MODEL SHIP: PAINTS AND LED LIGHTS

Complete your wooden model ship of this beautiful ship by obtaining the best finishes for your HMS Supply at 1/50 scale by painting it with the Specific Set of Paints for HMS Supply (277PACK7), sold separately.

Also, remember that, as the boat is prepared to be illuminated, the model can come to even more life with the installation of our Set of LED Lighting for Models and DIY Projects (27590), also available separately.

HISTORY HMS SUPPLY: ‘FIRST FLEET’ SHIP TO COLONIZE AUSTRALIA

Discover HMS Supply, a wooden model ship of the English armed brigantine sailing boat from the 18th century. It was an essential part of the so-called First Fleet of the Royal Navy that colonized and founded Australia. HMS Supply was their oldest, smallest and fastest ship. Built in 1759 as a 175-ton armed vessel, she became the colony’s only link to the outside world after the loss of HMS Sirius in 1790. HMS Supply, precisely, was intended to be aship support for HMS Sirius(1786).

The HMS Supply was a brigantine, that is, a ship that had two masts and square sails. In addition, it was also a sloop, that is, a small ship with a single gun deck. It had eight small three-pounder guns and carried 50 men. Its dimensions were 21 meters -70 feet- in length and 8 meters -26 feet- in width.

From 1759 to 1786, HMS Supply was used to transport naval supplies between Thames and English Channel ports. During this period, she was docked at Deptford Dockyard. There she underwent minor repairs as necessary to maintain her seaworthiness.

On May 13, 1787, the ‘First Fleet’ left Plymouth – England – heading towards the antipodes. Under the command of Commodore Arthur Philip, the convoy was made up of 11 ships, carrying 1,500 sailors and officers with their families, as well as 732 convicts. They were heading to the great land of the south to establish the penal colony of New South Wales – a coast previously explored by James Cook. It would later become the first state of the Australian Commonwealth.

HISTORY II: CONSOLIDATION OF A NEW NATION

On January 19, 1788, eight months and a week later, the fleet arrived at Botany Bay, with HMS Supply being the first to dock. On January 26, 1788, seven days later, everyone arrived at Port Jackson – the future Port of Sydney -. Philip landed to proclaim Australia’s first national day and become the new nation’s first governor. The 168-ton HMS Supply was the fastest sailing ship in the ‘First Fleet’ and served as explorer and messenger during the voyage. HMS Supply rivals Sirius as the most famous historic ship of the new Australian nation. On 26 November 1791, she left Port Jackson and sailed via Cape Horn, arriving at Plymouth on 21 April 1792.

Now, you have the great opportunity to build this great 1:50 scale model ship of the HMS Supply First Fleet 1787 (22420) on our new Modeling Workshop (27648-N), sold separately.

Maqueta Indian Girl Canoe (19000) a Escala 1:16. Kit de Modelismo Naval en Madera para Principiantes, de Artesanía Latina.

Ship Models

Indian Girl Canoe Model: New Reduced Replica of the Amerindian Canoe Created in 1902 by J.H. Rushton

Posted on February 19, 2024February 26, 2024 by Administrador DelBlog

We intended to surprise our modeler friends with an ‘unusual’ model in our catalog of wooden naval modeling kits. We’re sure that we have achieved it. We present The Indian Girl Canoe model (19000) at 1:16 scale. It is a fantastic, detailed and faithful reduced wooden replica of the Amerindian canoe created in 1902 by the builder J.H. Rushton. It is one of the typical boats that we have seen for many decades in the Far West movies, used by both the North American Indians themselves and the settlers. Now, you can enjoy the assembly of this kit in wood from 2024 for beginners. Below, we present you this ideal model:

CONTENTS NAVAL MODELING KIT THE INDIAN GIRL CANOE

The naval modeling kit with the The Indian Girl Canoe model contains all the parts you need to build the faithful miniature replica. It is made up of six wooden sheets with different thicknesses and cut by high precision laser to be able to extract the parts without problems (plywood and solid wood), and a brass photo-etched sheet for decorative details. In addition, it comes with linden and cherry wood strips, round tube and rod in brass, cotton threads in different thicknesses and colors – black and ecru – and fabric for the seats. As a bonus, beautiful wooden exhibition base to assemble with name plate of the boat.

If you want to assemble The Indian Girl Canoe model, you have our complete step-by-step video instructions, as if from a masterclass taught by our modelers it would be. It does not come with printed instructions. Watch the video instructions scanning the QR code on the box with any mobile phone or tablet, an action that takes you to our Youtube channel -click here-.

The kit does include a printed double-sided plan of the finished boat and the parts list with pictograms to facilitate the identification of parts during the construction of the model. Once built, the model measures 12.04” (306 mm) length, 2.32” (59 mm) height and 1.57” (40 mm) width.

PAINTS AND METHACRYLATE SHOWCASE FOR THE INDIAN GIRL CANOE MODEL

Paint your canoe model with our Specific Pack of Acrylic Paints (277PACK31), sold separately. You can choose to paint the model with a darker green color or a lighter one depending on whether you like one or the other more.

As a novelty, also for sale separately, exhibit your model with its Methacrylate Showcase (19000-AS) to display it properly and protect it from dust and any possible accident. The passage of time will not cause the model to deteriorate thanks to this magnificent urn.

ESSENTIAL IN THE HISTORY OF UNITED STATES PLEASURE BOATS

Discover our beautiful The Indian Girl Canoe, new wooden model ship kit for 2024 of the typical boat from Western and Indian American movies.

The Indian Girl Canoe was designed by J.H. Rushton, America’s leading canoe builder, for the burgeoning pleasure paddler market, which introduced the Indian Girl model in 1902. To quote Mr. Rushton: “The Indian Girl is strong, light, safe yet fast, graceful yet seaworthy.” This design from the beginning of the last century lives up to its name.

In this regard, it is interesting to know that Rushton hired M. Roundry from the B.N. Morris Canoe Company in Maine to build the Indian Girl. Roundry had the expertise to build quality wood and canvas canoes that Rushton did not. In the 1910s and 1920s, the Indian Girl model became extremely popular and became Rushton’s best-selling canoe.

BUILD THE INDIAN GIRL CANOE MODEL AT YOUR HOME

Now, you can get started in naval modelling by building the 1:16 scale wooden model of The Indian Girl Canoe (19000). Or simply build it because it is beautiful and a must for your historic boat collection.

You can also purchase The Indian Girl Canoe Gift Pack (19000-L). This one includes the model, its showcase, its specific paints and some tools that can help you during the model construction process. This pack is more economical than if you buy the products separately. Take advantage of this opportunity!

Naval & Aviation History

Memoirs Frigate Hermione La Fayette (II): Shipwreck, Location and Reconstruction of the French Ship

Posted on January 17, 2024January 17, 2024 by Administrador DelBlog

After the help it provided in the United States War of Independence, we continue telling the memoirs of the frigate Hermione La Fayette on this post. Specifically, we will talk about its latest missions, its rediscovery at the bottom of the sea and its reconstruction with a replica that exists today. Given the great historical relevance of this large French sailboat, the modelers of Artesanía Latina created a faithful wooden model at 1:89 scale (22517-N). Which, by the way, is now also presented at Gift Pack (22517-L) with the model, its specific paints and its figurines. All in 1 at a cheaper price than if the products are purchased separately!

Seven months after its return to France – where it underwent various repairs – it was entrusted with new campaigns. In September 1782, the frigate’s destination ocean will no longer be the Atlantic, but the Indian Ocean. The coasts of India and the Bay of Bengal await the Hermione and its new commander, Lieutenant Du Pérou. Aim? Support the fleet of Admiral Suffren, who fights on a secondary front of the American War. L’Hermione arrives at Île de France on April 18 and joins Suffren on July 14, 1783, a few days after its important victory at Gondelour. Peace was signed in 1783 and L’Hermione returned to Rochefort in February 1784, after several stops on the île de France and Île Bourbon in October 1783.

For seven years, from 1784 to 1791, the memoirs of the frigate Hermione La Fayette remain stationary in Rochefort. Its hull is very damaged and requires a very deep and long repair. Her hull and rigging are also not in optimal condition. That is why, since 1789, around 450 repairs have been carried out so that it can sail again.

MEMOIRS OF FRIGATE HERMIONE LA FAYETTE: WRECK AND LOCATION

Times of revolutionary France back in 1793. On the one hand, the country goes to war against the English in February. On the other hand, Vandean revolts occur in the west of the Gallic nation. In these turbulent times, the memoirs of the frigate Hermione La Fayette are written again with Captain Pierre Martin. This is because the French ship is heading to monitor and control the Vendeans and English at the mouth of the Loire River. They must be prevented from landing on the coast and from entering the town of Sables-d’Olonne and Nantes.

Its last mission arrives in September of that same year, which leads it to its shipwreck. Hermione only has to escort a convoy of twelve ships with a cargo of sixty-five guns from Indret between the Loire estuary and Brest. The inexperience of the crew is such that the frigate runs aground in the shallow waters of Le Croisic (Plateau du Four) breaking the hull to starboard.

The jewel of French naval history remains for almost two centuries at the bottom of the sea. It was not until July 22, 1984 when a diver, Michel Vasquez, discovered parts of the wreck. With great care, they manage to float some of the remains, thus beginning to bring the frigate Hermione La Fayette back to life. Among others, the anchor, a piece of the rudder and three cannons. The last searches with geolocator end in 2005.

RECONSTRUCTION OF THE FRIGATE: HERMIONE LA FAYETTE ASSOCIATION

The memoirs of the frigate Hermione La Fayette must be brought back to reality. For this reason, the Hermione La Fayette Association – whose official license our models hold – decides to create a replica of the French ship. In 1997, its reconstruction began at the Rochefort arsenal. Seventeen years later, on September 7th, 2014, the magnificent replica of L’Hermione was launched.

Shipyard is located in one of the two dry docks located at one end of the Corderie Royale, on the banks of the Charente River, in Rochefort. The place was designed and conditioned so that it could be visited.

The first and fundamental premise is that the replica is as faithful as possible to the original. That is, a three-masted ship with more than sixty-five meters in length, twelve hundred square meters of sails and a hull made entirely of oak wood. Without original plans, they take as reference those of Concorde, its twin frigate. On this, they are making the required changes with two goals: its adaptation to current regulations and its comfort for the crew.

These are some of the characteristics of the replica: mainmast fifty-four meters above the keel, made with two thousand oak trees, more than four hundred thousand pieces of metal and wood, one thousand pulleys, twenty-six cannons 12 pounds on the battery deck and eight 6s on the main deck.

For the rigging of 18th century ship, around 200 sailors were needed. However, the replica is only 80, which shows that it now has numerous technological improvements. The original frigate was built in just half a year, while the launch of the replica was in the 21st century, it takes six years until 2014.

HERMIONE LA FAYETTE: MODELS FOR THE DELIGHT OF MODELERS

Once its complete history is known, we encourage naval modelers to build our Hermione La Fayette model for advanced level (22517-N) if you have expertise skills or our Easy Kit model for beginners (17000).

Read first part of the post…

Naval & Aviation History

Chronicle Frigate Hermione La Fayette (I): Learn about Its Prominent Role in the US War of Independence

Posted on January 12, 2024January 17, 2024 by Administrador DelBlog

Saying its nickname, any naval modeler and lover of historical ships is enthralled: ‘The Frigate of Liberty’. Yes, we are talking about the French ship Hermione La Fayette from the 18th century. And its spectacular 1:89 scale wooden model (22517-N) for advanced modelers. But, on this post of Artesanía Latina blog, we intend to show the reader the enormous relevance in history that this beautiful French sailboat had, the chronicle of frigate Hermione La Fayette. Hence, its miniature buildable model is essential in the collection of any lover of naval modeling.

HISTORICAL CONTEXT BEFORE BUILDING THE FRIGATE HERMIONE LA FAYETTE

Last quarter of the 18th century, there is a great rivalry between France, England and Holland to gain control of different parts of the globe. When the different European nations fought for more power. At this time, France once again manages to have a worthy fleet in its fight against the British Royal Navy for the well-known colonies and for the money they bring to the coffers of the European states.

In this sense, the ‘New Continent’ sees how revolts begin to occur in its North American colonies, a fact that France intends to take advantage of to take revenge on the British… And they will achieve this thanks to the frigate Hermione La Fayette and many other vessels that are built at the Rochefort arsenal! Precisely, the construction of the frigate occurred in a golden stage in which the French fleet achieved very relevant victories, such as the one that occurred in the United States War of Independence. France supports the American insurgents, who are continually ‘looted’ by taxes by England. And Hermione La Fayette participates fully in helping them.

On July 4th, 1776, the Declaration of Independence was written. Congress defends what has been achieved with the support of the French country, so representatives of the American Chamber visit Europe to gather weapons and to convince the authorities to have French officers fight with them. France not only accepted this in February of 1778, but also the following month declared war on England. And a 20-year-old young man has a lot to do with this Franco-American commitment. Gilbert du Motier, the marquis of La Fayette. This is the one who convinces King Louis XVI to support the Americans.

CHRONICLE FRIGATE HERMIONE LA FAYETTE: CONSTRUCTION

The chronicle of the frigate Hermione La Fayette continues with the beginning of its construction. The French minister De Sartine proposed its creation and the Council of the Port of Rochefort approved it in November 1778. Order was given to naval engineer Pierre Chevillard Sr., who, in addition to the Hermione La Fayette, also directed the construction of another frigate, the Fée. To do this, it is based on the plans of two other vessels: Courageuse and Concorde, the first two of these four frigates.

At this point, the construction was fired, which took place on the right bank of the Charente River, within the same arsenal, in December 1778. This incredible speed in assembling the sailboat is obviously due to the demand for help in the War of Independence, but it also has other factors that help achieve this speed never seen before.

Firstly, because the theoretical and practical basis in naval engineering is already available. Secondly, because of the huge workforce that is used. And thirdly, because they have the materials where they work. On this chronicle of the frigate Hermione La Fayette, it should be noted that hundreds of carpenters, blacksmiths and all types of professionals – without forgetting prisoners – are involved in its assembly so that the ship can be launched in minimal time.

CHRONICLE FRIGATE HERMIONE LA FAYETTE: CHARACTERISTICS

Hermione La Fayette is a frigate, it is a light, fast and very maneuverable ship. It is unbeatable. Its dimensions? 66 meters in length and 11.5 meters in width. Speaking of its mast, it has three vertical masts with modular dimensions and a sail of up to 3,300 square meters. Without forgetting its complex rig of 26 kilometers of rigging that requires between 250 and 300 crew members. Regarding its weapons potential, it has 32 cannons. 26 units of 12-pounder guns on the battery deck and 6 units of 6-pounder guns on the castle deck.

To provide it with extra speed, in January 1780, the hull of the Hermione La Fayette was covered in copper with 1,100 sheets of metal. Thus, the hull is protected from mollusks and algae.

INITIAL TEST IN THE GULF OF BIZCAYA AND FIRST STEPS IN AMERICA

The Bay of Biscay is the first place where it is destined, here the chronicle of the frigate Hermione La Fayette continues before its American campaign. During half a year of 1779, the commander La Touche Tréville intends to check the conditions under which the ship sails. To do this, it also recruits 292 people as a crew. Objective of this first mission? Monitor and protect the coasts of the aforementioned gulf and the English Channel where trade is continuous. The Gauls capture six English ships.

Next, in March 1780, Hermione La Fayette began her journey in the War of Independence with 316 crew members. It leaves from the port of Rochefort with the Marquis de La Fayette who is in charge of a secret mission. Meet George Washington in Boston and support him economically and militarily. The French watched the North American coastline and fought against English frigates for almost two years through campaigns to protect allied trade and attack the enemy.

In June 1780 one of the most notable battles occurred in the chronicle of the frigate Hermione La Fayette. This is because it fights against four English ships, among which is the frigate Iris. From the French ship its cannons and 1,250 rifles and blunderbusses are fired 260 times. 10 men die and 37 are injured, including the commander and his assistant. A month later, in Newport, the 5,500 men of the Count of Rochambeau’s expeditionary force disembark. This is sent by Louis XVI from the town of Brest to support the American insurgents.

CHRONICLE FRIGATE HERMIONE LA FAYETTE: VICTORY IN YORKTOWN AND RETURN

In May 1781, the reception of the United States Congress and the Council of State of Pennsylvania takes place aboard Hermione La Fayette. An official dinner is held there in the presence of the Marquis de La Fayette and Samuel Huntington, president of the Congress. This meeting is a definitive test of the friendship between the two countries.

Two months later, on the coast of Île Royale, the frigates Hermione and Astrée encounter a convoy escorted by six English ships, which they attack. It is the naval battle of Louisbourg, in which two English ships finally lower their flag. The material damage is extensive, especially to the rigging, and Hermione records twenty-two victims. This confrontation is captured by the frigate’s auxiliary lieutenant Mullon, present on board, and later painted by Auguste-Louis de Rossel de Cercy.

The frigate Hermione La Fayette has to go through a ‘workshop’ until September 10th, so it remains in Boston to fix all its damage. It gives him time, however, to participate in the siege of Yorktown in October 1781. This battle pits the allies, with the Count of Rochambeau at the forefront, against the English, led by Lord Cornwallis. After three weeks of dispute, the latter surrenders, with a quarter of the British forces fighting in the war. The victory at Yorktown led to the consequent Treaty of Versailles, which was signed in 1783, and the independence of the thirteen British colonies, which became the United States of America.

After this achievement, the chronicle of the frigate Hermione La Fayette in America closes. First, by setting sail on February 2nd from the United States and, second, by dropping anchor in the French harbor of Basques twenty-three days later.

EASY KIT HERMIONE LA FAYETTE: FOR BEGINNING MODELERS

In addition to the model for advanced modelers, Artesanía Latina has created recently the range Easy Kit with Hermione La Fayette (17000) in this one. A model intended for those who are starting out on naval modeling or, simply, for those who want to build it.

Read the second part of the post…