maqueta de barco archivos - Page 2 of 4 - El Blog de Artesanía Latina

Soleil Royal History: the French Warship of King Louis XIV in the 17th Century

Posted on March 2, 2023March 2, 2023 by Administrador DelBlog

It is, for sure, one of the largest and most powerful warships of the Baroque. Without a doubt, it is also the most beautiful decorated of the boats of the time, it was sublime. We are talking about the French warship that was part of the Navy of King Louis XIV during the 17th century. We are writing this post to learn about the history of the Soleil Royal, the Gallic ship of the line with 104 guns arranged in a battery on three levels, flagship of Admiral Tourville. The emblem of the ‘Soleil’ had been chosen by the French monarch as his personal symbol.

The history of the Soleil Royal begins with its construction in Brest (France) between 1668 and 1670. Who was in charge of carrying it out? The engineer Laurent Hubac, who takes two years to finish. It is launched in 1669, but unfortunately it lays unused in the port of Brest for years. At first, Soleil Royal does not enters into combat at all.

As we have already mentioned, its decoration is spectacular. The person in charge of this is Antoine Coysevox, a sculptor who creates all the decorations on the ship, including those on the gun embrasures. This plastic artist from the court of Louis XIV is also responsible for the impressive and still existing ornaments of the Palace of Versailles.

Print of the Soleil Royal from the Louvre Museum. — BERAIN Jean I, Musée du Louvre, Département des Arts graphiques, INV 23718, Recto.

SOLEIL ROYAL HISTORY: NINE YEARS’ WAR

The history of the Soleil Royal continues, does not stop. Subsequently, the Soleil Royal is commissioned with 112 guns and 1,200 men on board when the Nine Years’ War in 1688. Also, called War of the Great Alliance, War of the Palatinate and War of the League of Augsburg.

The King decides at first to send all his ships prepared to sail and for battle. However, seeing himself in inferior conditions, he also orders to send the useful ships, even if they are moored to the dock, as is the case of our Soleil Royal. So this vessel departs from the port of Brest on June 22, 1690.

Then, Tourville commands the French ship, a highly respected officer in the Navy. The Soleil Royal remains waiting for a favorable wind to go to the Isle of Wight. There, the English fleet remains anchored after sending two French ships on a reconnaissance mission. On July 10, 1690, the Battle of Béveziers (Beachy Head) broke out with the surprise factor of the French attacking the Anglo-Saxons. After its victory, France seizes control of the English Channel.

The role in history of the Soleil Royal is fundamental as the flagship of the Escadre du Ponant (Squadron of the West) leading the French naval formation on the squad center. It is said that it is a good sailboat, it sails optimally, and its firepower is lethal.

THE FRENCH WARSHIP AT THE BATTLE OF BARFLEUR

Once its naval warfare began, the Soleil Royal became a French war emblem. Now with 104 guns, the French ship leaves the port of Brest on May 12, 1692 leading a fleet with 44 more ships. It may seem that there are many. However, on May 29, the French ships encountered the incredible Anglo-Dutch naval force. 97 powerful warships await the French in the Battle of Barfleur.

The crossfire starts! The Soleil Royal and its companions, being vastly outnumbered, decide to attack the enemies. After an arduous fight, it is forced to flee because of the serious damage suffered. Its crew is depleted by half and can barely sail. For this reason, the Soleil Royal and the ships Triomphant and Admirable are forced to anchor in Cherbourg to be repaired. They cannot reach the port of Brest, further away than the one mentioned.

END OF THE SOLEIL ROYAL AT THE BATTLE OF CHERBOURG

The history of the Soleil Royal ends at the Battle of Cherbourg. While docked at the Pointe du Hommet, the French warship is attacked by 17 ships which it repels with its artillery fire. The problem is that the stern of the ship catches fire and spreads the rest on the ship of the line.

With the help of the population of Cherbourg, only one survivor can be rescued from the around 883 – or even more – crew. The end of the history of the Soleil Royal, it remains near the arsenal of the port. Of course, its legacy continues throughout the seas and world naval history. A detailed 1:40 scale model from 1839 of the hull and sculptures of the Soleil Royal is currently on display at the Musée National de la Marine in Paris.

For our part, from Artesanía Latina, we are pleased to bring you this beautiful and faithful miniature replica in wood at 1:72 scale of the Soleil Royal (22904) that you can build with your own hands. For more in-depth information, there is another post on our blog that talks exclusively about the model. If you are an expert modeller and need a challenge at your level and with such beauty… Our Soleil Royal model is for you!

Ship Models

Santa Ana Model Ship in Wood at 1:84 Scale: The Return of the Acclaimed Naval Model Building Kit for Experts, Limited Edition Trafalgar 1805!

Posted on October 6, 2022October 6, 2022 by Administrador DelBlog

After more than six years of waiting and hundreds, if not thousands, of emails sent by our customers friends requesting a highly desired product from Artesania Latina, we are going to brighten your day! As a radiant novelty for 2022, we are excited to present you the new and limited edition of Trafalgar 1805 Santa Ana model ship (22905-N) at 1:84 scale, the faithful replica in miniature of the Spanish line ship with 112 cannons launched in the last quarter of the nineteenth century. And most importantly, an essential vessel in the Battle of Trafalgar between the Bristish Royal Navy and the Spanish Armada at the beginning of the following century. Of course, now we bring you a renewed ship model building kit aimed at elite modelers.

SANTA ANA MODEL SHIP: KIT CONTENTS OF SPANISH LINE SHIP

The renewed wooden naval modeling kit of the famous Spanish ship of the line Santa Ana at 1:84 scale was the prototype of a series of 8 identical vessels that would constitute the nerve of the Armada. The modeler will be able to find in this new limited edition of the kit hundreds of high quality parts such as strips, rods and sheets of solid wood and plywood of basswood cut by a precision laser. Also, a spectacular 373 x 110 mm brass photo-etched plate with the finest details such as lanterns, railings or details of the cannons.

Of course, pre-sewn sails made of cotton fabric -ready to be placed- and cotton threads of different colors and thicknesses. We cannot forget the acetates, the nets and the flags. As a bonus so that the model is perfectly displayed, like an artwork that it is, a wooden exhibition base with a metal plate.

With this Santa Ana model ship, you can represent the appearance and artillery of the boat correctly in the battle of Trafalgar. The crowned rampant lion figurehead is a new design. New artillery, corrected in scale and now much more detailed including photo-etched parts, has the howitzers that the ship carried in Trafalgar. The previous metal lifeboats have been replaced with a more realistic wooden construction.

Do you still need to see more to be amazed due to the beauty of the new Spanish ship of the line Santa Ana Trafalgar 1805? No problem. Just below there is a video in which you can watch all the contents, the so-called ‘unboxing’, of this spectacular wooden ship modeling kit.

RENEWED INSTRUCTIONS: STEP-BY-STEP MORE ENJOYABLE!

Once Santa Ana model ship (22905-N) is built, it measures 46.45” (1180 mm) length, 34.25” (870 mm) height and 18.11” (460 mm) width. Its design by means of false keel and frames brings its assembly closer to that of the real vessel. And how to assemble it? The modelers and 3D designers who work at Artesania Latina have redesigned all the old instructions. Colour arrives to the Spanish ship of the 18th century! Now, you will be able to appreciate the different assembly steps much more clearly. Languages? Spanish, French, Italian, English, German, Dutch and Russian.

The wooden ship model kit has an instructions DVD for computer (Windows and Mac). Clearing step-by-step photos, as well as demonstrative videos with some of the most important steps. Printed instructions are not included. Remember that you can also download for free the instructions on the product sheet of this model on Artesania Latina website. It should be emphasized that now it also comes with a special guide -annexes- to assemble and decorate the model as it was in reality the ship during the Battle of Trafalgar.

If you also want to see how Santa Ana model ship would look unpainted, with a more classic appearance, only with the sapele veneer, under these lines there are several photographs that show it, take a look at them!

PACK OF ACRYLIC PAINTS SANTA ANA

However, Artesania Latina modelers recommend to paint of the Santa Ana model ship with its Specific Water-Based Acrylic Paint Pack (277PACK22), for sale separately. The result of the finishes of the Spanish ship of the line will be much more realistic and visual. Quick-drying, the twelve different colors paints come in small 20ml pots. With off white, off black, bright red, FS11136 red, navy blue, ice yellow, chrome yellow, khaki yellow, cocoa, burnt umber and gold, your jewel of naval modeling will astonish anyone who sees it.

In short, built at the Ferrol Shipyards and launched in 1784, the Santa Ana was the first of a series of three-deck ships called the Meregildos. Captained by José Gardoqui, he intervened in the Battle of Trafalgar inflicting heavy punishment on the English ship Royal Sovereign. Attacked by several English ships, he was captured and later saved by the Rayo, Montañés and San Justo, who towed him to Cádiz in the middle of the night. He would end up sinking in Havana, where he had been sent to prevent Napoleon’s troops from capturing him. Now, you have the opportunity, once again, to build a fundamental piece of world naval history. Assemble this limited edition Trafalgar 1805 of Santa Ana model ship (22905-N). Just watch the video below to fall in love!

Modeling Tools & Accessories

Waterline Marker for Model Ships: Indispensable Naval Modeling Tool for Boat Hulls

Posted on September 1, 2022August 31, 2022 by Administrador DelBlog

Our modelers friends had been asking us for a waterline marker from our house, from Artesania Latina. They know of the extensive experience of our firm in the creation of effective and efficient ship modeling tools. After our 3D computer designers and our modelers developed a very conscientious joint work, we present our Waterline Marker (27649). You can click here to acquire it quickly and make your own tool workshops more complete. Your wishes are already a reality! We always read the opinions of our customers and fellow fans very seriously!

The waterline marker is one of the most necessary modeling tools during model ship building. This very useful product allows the modeler to mark that line around the ship, also thanks to the pencil included. Includes measurements in both metric and imperial systems. In this sense, it is 23 centimeters or 9 inches tall to be able to perform tasks on different naval miniatures depending on its size. In addition, it has a mechanism that makes it easy to raise, lower and fix the pencil to paint the line where your scale model demands, it is adjustable in height.

The waterline marker is made from precision laser cut plywood parts so assembly is a breeze. We recommend the use of dense cyanoacrylate and accelerator (27650) -sold separately- to glue the different pieces, fix them so that they are much more stable. In short, it makes it easy to mark the line on the hull of the ship model with total precision. In general, it can be used as a gauge to mark lines parallel to the work surface. But… How do you use the waterline marker correctly?

HOW TO USE THE WATERLINE MARKER

First of all, to maintain the ship models stable, position the ship’s keel well on its exhibition base or on our hull support (27011) for models with false keel up to 15.748” (400mm), for sale separately. The stern and bow must be balanced at the proper heights.

On the other hand, the waterline marker helps us navigate by painting the ship from bow to stern to trace that mark. In this way, the waterline is always it remains at the same height and the finishes will be much better when it comes to varnishing or painting with colors. When the ship is positioned, use a level you have at your workshop so that the naval model is also balanced from port to starboard.

Consult the assembly instructions of the vessel. Be sure of the height at which you should paint the water line. Place marker and pencil at desired height without painting. When you’re in the right place, move the marker from bow to stern while paying attention to where the pencil goes. After making that run and you are at the stern, see if that is where you have to start and end the line. If this is not the case, tilt the naval model slightly from the bow or stern to bring it into its correct position.

Now you can plot. Place the pencil against the hull of the ship. Do not force anything and move the marker making sure that the lower base does not rise from where it rests. The fixing wedge that the height tool has will help you to keep the pencil completely in its straight position. Even so press little so that the line is perfect. And ready! Fast and easy!

Ship Models

New Model Ship Kit: Assemble the Beautiful Dutch Fishing Boat Model Botter

Posted on August 25, 2022January 30, 2023 by Administrador DelBlog

It’s already at our warehouse! The new model ship kit with the beautiful Dutch fishing boat model Botter (22125) at 1:35 scale is now available. A faithful miniature replica of the best sellers from Artesania Latina, which our modelers have completely renovated in 2022. It has always been one of the most desired. This new model ship kit of Botter offers, among other novelties, an assembly experience… Much more enjoyable, precise and easy!

What a beautiful ship! Sorry, we couldn’t avoid it :). The new model ship kit is aimed at modellers with an intermediate level of skills. Once it is built, the revamped scale naval model measures 18.70” (475mm) length, 4.52” (115mm) width and 14.76” (375mm) height. Let’s learn more about the contents of the refurbished Botter.

NEW MODEL SHIP KIT: CONTENTS OF BOTTER

Build the fabulous traditional Dutch fishing boat from the Marken Island (now peninsula). It must be said that the new model ship kit with the wooden model of the Botter has received a deep upgrade. It offers a type of assembly using false keel and frames that brings the assembly of the miniature closer to the construction of the real ship. But, in addition, Artesania Latina team has spent hours and hours so that the new Botter has an implemented assembly experience since its quality parts fit perfectly in this wonderful fishing ship.

As for the contents, this new ship model kit of the Dutch fishing boat has the following parts. First, its very good high-precision laser-cut board parts and hardwoods. Second, its details in brass and cast iron. Third, their hand-sewn cotton sails ready to be placed. We facilitate the construction of the model as much as possible. Finally, this new naval modeling kit includes as a bonus a beautiful wooden exhibition base to build with name plate.

The level of details and finishes is simply spectacular, just look at the images below to verify that it is a… Perfect model! Materials of the highest quality, optimum arrangement of the ornamental elements… Fall in love when you see the Botter!

For the assembly, you can follow our new and precise step-by-step guide on DVD for PC (Windows and Mac)… On video! Yes, yes, our modellers have recorded the entire construction process to accompany you while you do it. With professionalism, explanations and precision, you will enjoy the assembly very much. The kit does not contain printed instructions. In this sense, remember that you can also see the assembly videos on our YouTube channel.

THE BEST FINISHES WITH THE ACRYLIC PAINTS SET FOR BOTTER MODEL

Artesania Latina has now the Specific Acrylic Paints Sets. Water-based and quick-drying, they allow the modeller to achieve the best and most realistic finishes on their models. It was a wish of our modellers friends, so they don’t have to look for the colors. Then, paint your model of the Botter (22125) with its Specific Set of Acrylic Paints (277PACK20), for sale separately.

In short, this renewed project from Artesania Latina modellers will provide our friends with great entertainment, a revised challenge and a end result that dazzles whoever sees it. It’s clear! The new model ship kit of Botter (22125)… You will love it, we can vouch for that.

Now, you can also purchase the Botter Gift Pack (22125L), which includes the model, its paints and some tools.

Ship Models

Sailboat Model Bluenose II: One of the Most Famous Regatta and Fishing Schooners in History

Posted on August 4, 2022August 4, 2022 by Administrador DelBlog

For many of us, this faithful replica in miniature that we present to you is one of the most beautiful on ship models catalog by Artesania Latina. The sailboat model Bluenose II (22453) at 1:75 scale, one of the regatta and fishing schooners most famous in history. Of Canadian origin, the wooden modeling kit will delight modellers with at least an intermediate level of skills. Once built, this spectacular vessel measures 27.16” (690mm) length, 4.33” (110mm) width and 22.44” (570mm) height. It will dazzle at any room where you expose it!

Firstly, it must be emphasized that the sailboat model reproduces the beauty of the original schooner in the most careful and precise way. In addition, its construction system using false keel and frames brings the assembly of the naval model closer to the construction of the real ship. Before we get to know the kit contents, let’s review the fabulous history of this beautiful ship.

HISTORY OF BLUENOSE SCHOONER: THE FASTEST SAILBOAT

Its name is due to the nickname given to the inhabitants of Nova Scotia (blue nose), where the schooner was launched on March 26, 1921. In this sense, it was built at the Smith & Rhuland.

The Bluenose was operating in the Grand Banks region along with dozens of other vessels. This is a peculiar area of the North Atlantic, comprised between the coast of Canada and Labrador. It is subject to periodic mists that make it an Eden for fishermen. There, hake, cod, salmon and tuna are found in prodigious quantities. That is why this schooner is also known as ‘The Queen of the Grand Banks’.

He was going to fish in Newfoundland waters but his destiny changed. It was seen that this fast schooner won all the regattas that were organized on the east coast of the United States. These fishing boats, especially because of their sails, are conditioned to reach great speed.

Thus, the Bluenose was winner of the North Atlantic International Fishermen’s Trophy in all the races held between 1920 and 1938. Captain Angus Walter, at the forefront. In 1942, despite the efforts of this captain and many others who tried to keep the ship in Nova Scotia, the Bluenose was sold to carry cargo in the West Indies. On January 28, 1946, when running aground on a coral reef off the coast of Haiti.

Lastly, the Bluenose II, built in 1964, is an exact replica of the original and the last of the tall Schooners. Now he is an ambassador, symbol and tourist attraction of the city of Lunenburg, where he continues to sail today. Want to visit? Take a look at his official page.

SAILBOAT MODEL: KIT CONTENTS OF BLUENOSE II

The sailboat model Bluenose II (22453) is made of wood and metal with high quality parts. As can be seen in this image of the stern, its finesse and elegance, no doubt. It’s a legend scale model to build!

That is why the modeling kit with the Bluenose II sailboat model contains high-precision laser-cut board parts –they fit perfectly-, hardwoods, brass, cast iron, threads and cotton sails sewn by hand ready to be placed.

Lots of beautiful and real details are included in this modeling kit. These give the Bluenose II a perfect appearance compared to the original ship.

Also, its precise step-by-step instructions on DVD for computer format will help you effectively during the process of building the sailboat model. Also, you can download for free the digital assembly guide in the Bluenose II product sheet. Available languages? Spanish, English, French, Italian, German, Portuguese and Dutch.

On the video below, our modelers friends can see the contents of the 1:75 scale wooden naval modeling kit from Bluenose II (22453). Please note that paper instructions are no longer available, we are sending them on DVD to help prevent global logging. One of the fundamental commitments of Artesania Latina in the 21st century.

In short, the sailboat model Bluenose II in wood, an exact replica of the Canadian regatta and fishing schooner, is unavoidable for any modeller. Build it and tell us about your experience!

Ship Models

American Schooner Model: Improved Assembly Experience for Renewed Virginia

Posted on July 14, 2022October 4, 2022 by Administrador DelBlog

One of the most attractive and beautiful wooden ship models from Artesania Latina… Now renewed! Our 3D designers and our modellers have rethought the aesthetics and assembly of the American schooner model Virginia (22115) at 1:41 scale. So, the assembly experience for our modellers friends is much more pleasant, fun and simple. And what’s more, we present this faithful miniature replica of the 19th century ship in a new box!

It is a beautiful naval miniature suitable for beginners modellers, although it will also delight the rest of the modellers, regardless of their level. Once it is built, the American schooner model Virginia measures 21.25” (540mm) length, 4.72” (120mm) width and 19.68” (500mm) height.

The Virginia is a type of vessel known as a ‘schooner’ launched in 1819, as we mentioned earlier. It was very fashionable, along with other small rigged boats, in the United States for its great speed, maneuverability and elegance. Precisely, these schooners were the germ of the US Coast Guard. Its objective? To comply with the new import and customs laws thanks, in addition, to its central rotating carronade and light weapons. It dedicated itself to controlling maritime borders in interception and pursuit missions of other ships that tried to reach its coast.

Let’s check what are the magnificent contents that the wooden modeling kit of the American schooner model Virginia brings.

CONTENTS OF AMERICAN SCHOONER MODEL VIRGINIA

Renewed wooden naval modeling kit with the American schooner model Virginia at 1:41 scale. It offers the modeler high quality parts for assembly, they fit perfectly. In this sense, it is a joy to assemble this model with its high-precision laser pre-cut board parts and noble woods such as birch and sapele. Without forgetting its sewn sails ready to be placed, cotton threads and brass, cast iron and photo-etched parts.

On this renewed model we have implemented the assembly experience so that the construction process satisfies the modeller. On the old model, the assembly was more cumbersome. Now the American schooner model Virginia is assembled more precisely and more easily. The new and extremely detailed step-by-step multimedia instructions on DVD format for computers (Windows and Mac) help a lot.

If you wish, you can also download the instructions for free at Virginia product sheet. We remind you that printed instructions are not included in the modeling kit to contribute to the environmental preservation of our planet.

As a bonus, the American schooner model Virginia includes wooden exhibition base to build and nameplate of the ship. Display your creation at your workshop, home or office alongside your ship modeling collection.

SPECIFIC SET OF ACRYLIC PAINTS FOR VIRGINIA SHIP MODEL

How to achieve the best finishes for the American schooner model Virginia by Artesania Latina? With one of the new sets of paints that we have created for the different naval models of our catalogue. In this way, you can now paint your own miniature with the Schooners Specific Acrylic Paints Set: Virginia (277PACK21), for sale separately.

This set of water-based paints is characterized by its quick drying. It comes with 12 jars of 20 ml each with assorted colors. Off-White, Off-Black, Buff, Bright Red, Hull Dark Green, Garnet, Gun Metal Gray, Cocoa Brown, Burnt Umber, Hull Green, Gold and Semi-Gloss Dye Varnish Oak Shade. They are perfect paints for airbrushing although they can be used perfectly with brush.

In short, the renewed American schooner model Virginia (22115) is a great choice for your next ship modeling. Assembly precision, beauty, great level of detail, parts of the highest standards, perfect finishes… Assemble it now!

Modeling Tools & Accessories

Naval Modeling Tools: Build your Model Ships Kits with Specific Ones

Posted on June 23, 2022August 3, 2023 by Administrador DelBlog

The wooden ship models are beautiful once they have been assembled. Until that moment, the modeler must go through a detailed and prolonged construction process for which she/he needs some tools. So, Artesania Latina has created a catalogue of specific naval modeling tools so that certain works on the model can be carried out with greater precision, speed and ease.

So we are going to review all these tools so that our modelers friends can know about their existence and what they are used for depending on the task. We start by listing them:

Electric Plank Bender 220V (27074-1) and now 110V (27074-AM) too.
Plank Bender (27024).
Microshapers / Micro Moulding Scrapers A (27300), B (27301) and C (27304).
Magnetic Nailer (27023).
Hull Support (27011).
Set of Basic Modeling Tools Nº1 (27000-N)
Set of Professional Modeling Tools Nº1 (27001-N).
Waterline Marker for Model Ships (27649).

Let’s get to know them all in depth under these lines!

ELECTRIC PLANK BENDER AND PLANK BENDER FOR SHIP MODELING

The electric plank bender 220 volt (27074-1) is a tool for naval modeling and other crafts aimed at modellers in the European market. This wonderful tool allows you to bend and shape the wooden slats up to 3mm thick of your model ships in order to give them the curved shape of your hulls. You will get extraordinary results, guaranteed. Of course, we recommend that, for an optimal result, you moisten the wood beforehand.

The contents of the electric plank bender kit are the following:

220 volt electric soldering iron.
Brass tip for bending wood.
Metal support to prevent the soldering iron from burning the work surface.
Screwdriver to tighten the tip to the device.
Wooden template with compound curves.
As a gift or bonus, a jar of white glue for modelers.

Our modelers friends from the American market couldn’t use it due to voltage issues. So we have thought of them and, as a new in 2022, we have created the 110-volts electric plag bender with an adapted plug (27074-AM).

For modelers who prefer more artisanal methods when it comes to bending strips and assembling their naval models, we offer the manual plank bender (27024).

This tool uses the technique of making incisions on the curve inner face in order to bend the strip, for example, to assemble the hulls of miniature ships.

Whether it’s one of the electric ones or the manual tong, either one is one of the essential naval modeling tools to achieve the best finishes in the model building processes.

NAVAL MODELING TOOLS: MICRO MOULDING SCRAPERS / MICRO SHAPERS

These amazing and magnificent tools, the Micro Moulding Scrapers or Micro Shapers (27300, 27301 y 27304), from Micro Tools Collection, are ideal for molding all kinds of miniatures and models in wood and plastic: boats, buildings, dollhouses… Each of the three existing sets for sale separately (A, B and C) has 3 metallic plates with 15/16 different shapes per plate.

The tool works by passing it through the wood or plastic ribbon several times until the desired shape is obtained.

The fabulous results achieved with these Micro Moulding Scrapers can be immediately appreciated.

If you want your creations have numerous forms of decoration, that are not all the same details, that can vary so as not to get bored, the Micro Moulding Scrapers / Micro Shapers are your perfect ship modeling tools.

MAGNETIC NAILER FOR MODEL BUILDING

The magnetic nailer (27023) by Artesania Latina is one of the essential naval modeling tools for models that need nails to build. It facilitates fast and easy nailing in wood during the assembly of the hull of model ships, but also when fixing the deck elements. It is important to note that, in order for the tips to stick to the nailer, they must be made of iron or contain iron.

How to use? Apply moderate pressure to the nailer, so you can drive the nail straight and accurately. After entering the wood, we recommend finishing off the tip with the modeller’s hammer (27017) or by tapping the handle of the nailer if the modeling enthusiast has advanced knowledge and skills.

Otro consejo: taladre mínimamente la superficie. Use un taladro con broca igual o menor a las puntas que se van a clavar o con la misma punta para que el diámetro de la hendidura no sea mayor a la de la punta.

HULL SUPPORT FOR SHIP MODELS

More specific, it’s impossible! The hull support for model ships (27011) is another of the naval modeling tools you need to be able to work comfortably on them. It is highly recommended for holding naval models with a false keel of up to approximately 400 mm. On this aspect, the hull support is valid for the miniature replicas of the 19000 series, 20100 and some of the 20400 of Latin Crafts.

Thanks the hull support you can hold the hull of the boat you are building and kepp immobile, leaving both hands free. It’s great, for example, for keeping the hull level and static when tracing the waterline. It has a pivot point to tilt the helmet to the ideal working position. The hull fastening and the pivot point of the bracket are fixed by means of thumbscrews. Including two metal mini clamps to fix the support to the edge of the work table. That said, it is one of the essential naval modeling tools in your workshop.

SET OF BASIC MODELING TOOLS Nº1

The set of basic tools for naval modeling and other modelling (27000-N) comes with tools to build model ships, planes and trains more easily. Includes cutter, tip nailer, hand drill, oblique cutting pliers, thread tweezers and sanding block.

As we have talked about the nailer previously, we focus on the remaining tools. The no.1 cutter is essential for any modeler and it is characterized by its aluminum handle and interchangeable blade. As for the manual drill, it is perfect for working details on wood and soft plastic such as polystyrene. It has a double jaw and a 1 mm drill bit.

Using the oblique cutting pliers, the modeler can cut wood, plastic and soft metals such as brass. Japanese-style thread shears with very sharp tips are very precise in cutting the threads of boat maneuvers. They are easy to use with two fingers. Lastly, the sanding block leaves the wooden surfaces smooth and homogeneous. It allows to work rounded and sharp shapes.

SET OF PROFESSIONAL MODELING TOOLS Nº1

The set of professional tools for naval modeling and other modelling (27001-N) includes plank bender to bend the wooden strips, tweezers, modeller’s hammer, flat file, flat rule in steel and rounded nose pliers.

The plank bender for bending wood, made of ABS high quality, includes spare blade, in addition to the one it comes with. It is a kind of pliers for bending wooden strips by making incisions on the inside of the curve that you want to achieve. In this way, the modeler can clad the hulls of ships much more easily. On the other hand, straight tweezers help handle small parts in the model building process. Especially when it comes to sticking them.

The modeler’s hammer is also widely used. With measures appropriate to the hobby of modeling, it is made of chromed steel and has an ergonomic handle. The set also includes a flat file to roughen wood, plastic and metal surfaces. A 150 mm steel flat ruler to take measurements or use as a guide. And finally, some round nose pliers to work and shape metal parts, wires and other details of the models.

WATERLINE MARKER FOR MODEL SHIPS

As a novelty in 2022, we present to our modeling friends the waterline marker for model ships (27649). It is an indispensable naval modeling tool to be able to mark the line on the hull with total precision. With a pencil and this product, you’ll save yourself a lot of headaches. In general, it can be used as a gramil to mark lines parallel to the work surface. It is height adjustable and includes measurements in both the metric system and imperial. It is made of laser-cut plywood pieces for optimal assembly – construction required – and holds the pencil with a small wedge.

Finally, if you want to have fewer headaches with your projects, the naval modeling tools made by Artesania Latina are your best choice… Have fun building our kits!

Ship Models

Fishing Boat Model Mare Nostrum: New Image for the Fabulous 1:35 Wooden Ship Replica from the Mediterranean Sea

Posted on June 16, 2022June 13, 2022 by Administrador DelBlog

One of the best-selling naval scale models in the world, one of the delights from Artesania Latina for modelers. The fishing boat model Mare Nostrum (20100-N) at 1:35 scale is a faithful miniature replica of the Mediterranean Sea. Detailed to the max! And now with a new image! Your kit to build comes with an improved and beautiful presentation thanks to the renewed design of its box. Aimed at modelers with an intermediate level of expertise and knowledge on naval modeling, it is also makes happy other lovers of this hobby due to its precious finishes and details.

The trawling boats in the Mediterranean Sea are all similar, presenting small variations depending on their place of origin. In this sense, the fishing boat Mare Nostrum is a classic boat from Arenys de Mar (Catalonia), Spain. It is characterized by having a length of 15 meters, a beam of 3.5 and a displacement of 10 tons. Its propulsion is carried out thanks to a 40HP motor. We have reproduced it exactly so that, after being assembled, this beautiful and typical naval scale model will be the same as its older twin brother.

FISHING BOAT MODEL MARE NOSTRUM KIT CONTENTS

The wooden fishing boat model of the legendary Mare Nostrum was redesigned a few years ago. Its assembly experience since then is totally satisfactory for the modeler who wants to spend time entertaining and passionate about the hobby. Parts that fit perfectly equals enjoyment. Once this classic Costa Brava fishing boat is built, its dimensions are 16.14” (410mm) length, 10.63” (270mm) height and 4.13” (105mm) width.

The naval modeling kit with the fishing boat model Mare Nostrum is made up of high quality parts in wood cut with precision laser and metal. It stands out for its high level of detail to provide greater realism. It is equipped with fish boxes, cabins, a detailed engine, a winch to collect the cable, and at the stern, protruding from the hull, a rigging with pulleys to pass it during hauling.

As a bonus, you can display your beautiful finished model thanks to the fact that it brings a wooden exhibition base with a name plate for its display.

PRECISE DIGITAL INSTRUCTIONS FOR MARE NOSTRUM ASSEMBLY

Assemble this magnificent 1:35 scale fishing boat model called Mare Nostrum, your ship model kit has detailed and precise instructions on DVD format for computer or laptop (PC or Mac). Remember that you can also download them for free at its product sheet on Artesania Latina.

IDEAL FINISHES THANKS TO FISHING BOAT MODEL PAINTS SET

How to get the best finishes for your fishing boat model Mare Nostrum? We have fantastic news! Artesania Latina already offers its specific Set of Paints for Fishing Boat Model (277PACK3), for sale separately. 12 jars of 20 ml each with fast-drying, water-based acrylic paints. Paint your naval scale model with the right colors!

Mare Nostrum (20100-N) is an exceptional wooden modeling kit that should be present on your collection of ship models as it is an icon of naval history and, specifically, of fishing. The Mediterranean at home!

Model Building Tips

Mississippi Model Set Up (II): Video Tutorials to Assemble the Wooden Paddle Steamer

Posted on May 19, 2022May 24, 2022 by Administrador DelBlog

We continue with the ‘Model Building Tips’ section and with the second part of the video tutorials for the set up of the King of the Mississippi model (20515). The wooden naval modeling kit of the paddle steamer at 1:80 scale represents a faithful replica of the original model. The assembly of this classic North American wooden boat from the 19th century is aimed at modelers with an intermediate level of skills on naval modeling.

On this post, first, our team of modelers will show you how to assemble the columns and the railings of the second deck. Second, how to work the windows and the doors. Then, how to handle and place the high-quality photo-etched decoration parts. Next, we will show you how to make the capstan base. And finally, our modelers friends will know how to decorate the chimneys of the steamboat. These videos are a great help during the construction of the King of the Mississippi model. Especially the most difficult parts. Go for it!

MISSISSIPPI MODEL SET UP: SECOND DECK COLUMNS AND RAILINGS

We pick up the video where we left off a week ago, when we built the columns and railings of the first deck. On this occasion, we turn to the existing ones on the second deck of the American paddle steamer scale model. This explanation corresponds to Section 14 of the digital instructions. We remind you that you can download them for free in the same product file of the King of the Mississippi.

Apply cyanoacrylate (27650) on one of the wooden columns of the railing. With the help of a reduced size square or bevel (27325), manipulate it until it is completely straight on the second cover, nothing crooked. Repeat the process with the remaining columns -four more- as shown on the video, placing them on the place provided for it. Obviously, before gluing them, they must already be varnished.

Next, we take the curved wooden base of the railing, apply cyanoacrylate to it and adhere it to the front space between the two columns. Help yourself with some straight tweezers (27204) for this whole process. Remember, beforehand, do not varnish the part where you are going to put the glue. Once your photo-etched railing is painted, add a few small drops of cyan to different spots on its underside. Using the same tweezers, carefully place it between the two columns. On top of this, take the wooden upper part, the handrail with the tweezers, paint it with cyan too and fix it to the upper part of the railing. Do the same process with the other curved railing and with the two straight sides. The result should be this:

WINDOWS AND DOORS ASSEMBLY SECOND DECK OF KING OF THE MISSISSIPPI

On this seventh video, another of the important processes for King of the Mississippi (20515) model set up. Specifically, the assembly of the windows and doors of all the rooms on the second deck. On the digital instructions, steps between 13 and 24 of Section 15.

Take a pointed needle nose pliers (27213). Fold the tabs of the photo-etched parts of the windows and doors. Paint them with brush and with acrylic water-based paint burnt umber color (27743). Help yourself to grab the part of nails with precision straight pliers (27204). With these, go placing each of the windows and doors. Gently press with your hands to make the lashes fit. Apply cyan to the back of the window and door for a stronger hold.

Work the photo-etched parts from the doors of the windows. Paint them with buff acrylic paint (27740). Use the aforementioned tweezers to make the task easier. With a brush very fine size 000 (17200C), burnt shadow paint, draw the grids on the front. Apply cyan to the back, where you haven’t painted, and using precision straight pliers, glue them to each of the sides of the window. Repeat the process with all the rest. Once they are in place, paint all the interior frames of windows and doors with a brush and burnt umber paint.

Finally, take the different acetate parts -there are six- and check that the size is correct. Put cyan on the wood, on the wall inside of the rooms, and glue the acetates with the tweezers and hands. To put the acetates on the curved parts of the bow and stern, use in this case a curved tweezers (27021).

It should look like this:

MISSISSIPPI MODEL SET UP: PHOTO-ETCHED DECORATIONS

We continue with the following video tutorial for the construction of the model King of the Mississippi (20515): photoen-etched decorations of the fourth deck. These steps appear on Section 21 of the digital instructions.

Paint them with a flat brush and off-white water-based acrylic paint (27702). Once dry, glue them with cyan and the help of your own hands on the wooden plank of the fourth deck -where the coffer goes-. Before joining one part to another and adding cyan to adhere them, file with a mini diamond file (27015-3) a little the extremes that will be fixed with the others. Repeat this action. When you have to put the last part, if you have left over because it is too long, mark with a pencil where you should cut it. Cut it with a cutting pliers (27211), file and glue carefully. Put cyano on all the balustrade supports and remove the excess with the point of a scalpel cutter (27019). Now, paint all the joints of the different parts with off-white color.

Apply cyano all over the edge of the deck wood plank where you are going to glue the wooden parts on the lower part of the balustrade. Take that base part in wood, previously painted, and glue it under the already placed photoengraving. Repeat the process with the other parts.

Once it is finished, it should be like this:

CAPSTAN BASE OF KING OF THE MISSISSIPPI MODEL SHIP

The ninth tip that we show you for the set up of the wooden model of the paddle steamer King of the Mississippi (20515) is the building of the capstan base. Steps 1-4 of Section 29 on the digital instructions. Let’s continue with this classic jewel of the ship modeling that It reminds us of literary characters like Tom Sawyer and Huckleberry Finn, by Mark Twain.

Take the parts and paint them with a flat brush and off-black acrylic paint (27703). Use some precision straight tweezers (27204) to hold parts while painting. Glue a strip -previously painted- completely centered on the cover. Use a small centering ruler (27326) to make sure it sits perfectly straight in position. Next is the small star-shaped base part of the capstain. When it comes to gluing the four ribbons on cross shape and the rest on the shape of a star, also use an tiny square (27325). This way everything will be uniform. Continue repeating the process as seen on the video tutorial. Lastly, paint the edges of the star-shaped base part of the capstan with off-white.

When the modeller have done the task, it should look like this:

MISSISSIPPI MODEL SET UP: DECORATION OF CHIMNEYS

The tenth and last video tutorial refers to the decoration of chimneys. Steps 15 and 16 of Section 33 on the digital instructions for the set up of the magnificent wooden model of the King of the Mississippi, at scale 1/80 (20515).

Fold the photo-etched part look like some poles with the help of a flat-pointed grip pliers (27213). Give it a round shape, for example, using the handle of the scalpel cutter and your own hands. Using some curved fastening tweezers (27021), insert it into each of the two chimneys through the ‘rings’ half-closed you just created. Glue the part with cyanoacrylate so that it is completely fixed by pouring it on the inside of the aforementioned rings.

The end result should be similar to this:

We hope that these video tutorials that guide the modeler through some of the most precise or difficult parts of the assembly will help. Do not forget that you have, for sale separately, a King of the Mississippi Set of 18 Metal Figures (20515F) that will give life to your paddle steamer model. Likewise, you can also acquire the Specific Acrylic Paints Set (277PACK6) for this model, and forget about having to look for them.

Finally, if you want to have everything your modeling kit needs, treat yourself or surprise a loved one who loves naval modeling with the King of the Mississippi Gift Pack (20515L), which includes the model, the figures, the paints and some tools.

Read the first part of the post…

Ship Models

Hermione La Fayette Model Ship: The Return of the ‘Frigate of Liberty’ for Advanced Naval Modelers

Posted on April 21, 2022July 25, 2022 by Administrador DelBlog

The beautiful ‘Frigate of Liberty’ has already returned to our warehouses foe delighting our modelers friends, especially from advanced level onwards. We are talking about Hermione La Fayette model ship at 1/89 scale (22517-N). A faithful miniature replica made of wood of this 18th century flagship of French naval history.

This jewel of the naval modeling boasts the official marketing license of the Hermione La Fayette Association, which has also participated on the design of this fantastic scale model. The aforementioned Gallic group is the one in charge of the construction of the life-size replica, which began 200 years after its launch in 1997. It is noteworthy that, in 2015, it made the same trip as the original ship. Now, the modeler can also enjoy its reliable assembly with the acquisition of the modeling kit from Artesania Latina containing the Hermione La Fayette model.

We have totally renewed the old model -you can download its digital instructions-. Thanks to our team of modelers and 3D designers, we have rebuilt the legendary Gallic vessel based on the same original plans of the ship. Now, let’s get to know the contents of the naval modeling kit of this wonderful wooden model.

CONTENTS WOODEN MODELING KIT HERMIONE LA FAYETTE MODEL

Like all the products of this renowned Spanish firm, Artesania Latina, the modeling kit with Hermione La Fayette model ship at 1:89 scale is high quality. Its parts meet the highest standards so that its assembly is a delight and that the model lasts for a very long time, incalculable.

It contains a high-precision laser-cut plywood board, so the removal of the parts is very easy. And, of course, their fitting too. Also, it brings parts of noble wood and veneer such as birch, which gives the miniature a totally real look.

Regarding its numerous details, the modeling kit brings them in high quality photo-etched brass. Without forgetting a multitude of accessories made of wood, metal and brass. In short, it comes with everything so that your Hermione La Fayette model is the same as the original ship.

As for the sails, it includes cotton sails, already sewn by hand, ready to be placed. On this way we facilitate the work of our modelers friends… And with optimal sails! As a gift bonus, the exhibition base for placing the model once finished, with name plate, could not be missing. Perfect for your model ship museum! By the way, once built, the model measures 750mm long, 284mm wide and 591mm high

VERY DETAILED DIGITAL INSTRUCTIONS FOR ASSEMBLY

Of course, to assemble Hermione La Fayette model ship, this one needs some instructions. Artesania Latina has taken care to create the best guide for step-by-step digital assembly on DVD format for computers (Windows and Mac). Why are our instructions the best? For its thoroughness and precision, for its more than 2,000 images in total and, last but not least, for its explanatory video tutorials. These clearly show modeling techniques and tricks that any modeling professional puts into practice.

FINISHES AND ACCESSORIES HERMIONE LA FAYETTE MODEL SHIP

Give the final touch to the French frigate Hermione La Fayette model ship and to bring it to life, Artesania Latina has provided two magnificent extras, for sale separately. On the one hand, achieve the most faithful finishes to the original boat by painting the 1:89 scale model with your Set of Acrylic Water-Based Paints (277PACK4), quick-drying. This contains 12 jars with 20 ml each in the following colours: Off White, Off Black, Bright Red, Royal Blue, Prussian Blue, Ice Yellow, Deep Yellow, Buff, Cocoa Brown, Burnt Umber, Gold and Vermilion.

On the other hand, if you want your splendid miniature of the Gallic ship to come to life, we also offer the solution! With the Hermione La Fayette 14 Metal Figure Set (22517-F) will do just that. Includes 7 sailors and 7 officers of the French Navy. They are figurines with measurements between 0.984” (25mm) and 1.181” (30mm) ready to be assembled and painted.

If you want to glue them, we recommend to our modelers friends our Thick Cyanoacrylate and Accelerator (27650). To paint them, the Basic Paints Set for Figurines (277PACK14) or the Advanced Set (277PACK15). Our specific Synthetic Brushes for Figures and Details (17120) are ideal for this task. Do not hesitate to assemble the historic and emblematic Hermione La Fayette model ship and add all the extras! As we said at the beginning, it is without a doubt a naval modeling museum piece that should be on your collection.

HERMIONE LA FAYETTE GIFT PACK

The Hermione La Fayette Gift Pack (22517-L) brings everything the French frigate needs to show off at your home or office. The 1:89 scale model (22517-N), its specific paints set (277PACK-4) and its set of 14 metal figurines (22517-F). Do you want your loved one to be happy? Give her/him this gift pack at a lower price than if you buy the products separately… Or enjoy it yourself!