modelling archivos - Page 2 of 4 - El Blog de Artesanía Latina

Build Juan Sebastian Elcano (III): Our Modelers Teach You How to Assemble the Spanish Training Ship

Posted on February 2, 2023March 23, 2023 by Administrador DelBlog

Let’s go with the third part of the post if you want to build Juan Sebastian Elcano model ship with more video tutorials recorded by our modelers during its assembly. The model of the Spanish training ship Juan Sebastian Elcano / Chilean Esmeralda (22260) at 1:250 scale is ideal for your first experience on the naval modeling. Now, we remind you that you can also purchase the Elcano Gift Pack (22260L), which includes the kit with the brigantine schooner sailboat, its paints and some tools. It has a lower price than if the products are purchased separately. That being said… Let’s continue assembling this historic model with a pre-fabricated hull!

BUILD JUAN SEBASTIAN ELCANO: MASTS (PART II – A)

On Step 16, we continue to explain some of the most difficult phases when you are going to build Juan Senastian Elcano model ship: ‘Mats – Part II’. Take the eight PCL parts and one BW1 part -wire- and put them on your work table. Next, cut a small piece of wire (BW1) with a Professional Straight Cutting Pliers (27212). With a hand drill, make a 0.5 mm hole on the upper part of the stick (PCL) and apply our Cyanoacrylate for Porous Materials (27620), for sale separately, where the hole is. Insert the wire into it and bend it 90 degrees. With the help of a Stainless Steel Ruler (27069) and the aforementioned pliers, measure 0.7 mm and cut off the excess as seen on the video. Repeat the process with the remaining PCL parts.

Take the four parts S1 -sails- and arrange them on your workshop. With the help of a sewing needle, use the thread –part CT1– to sew part S1 -sail- to part PCL -mast-. Thread through the corner of the sail and around the stick as well with some Straight Fastening Tweezers (27020) and the previous drill. Continue sewing the sail with the needle and thread along the length of the mast. Knot at the end of the neck, apply cyano and cut the excess thread as shown on the video.

ASSEMBLY ELCANO MODEL SHIP: MASTS (PART II – B)

Well, it’s time for the next task. Look for one BR1 part and four BR2 parts, all rings. With a utility cutter, poke a small hole in the outer corner of the sail. Open part BR1 with two Needle Nose Pliers (27213) and insert the ring through the sail. After inserting it, close it again using the aforementioned pliers. Now, do this whole process again with the four BR2 parts on the opposite horizontal side of the sail -with respect to the placement of the BR1 part-, just as seen on the video. Repeat with the remaining three sails. It should look like this:

ASSEMBLY ELCANO MODEL SHIP: MASTS (PART II – C)

Once the previous stage to build Juan Sebastian Elcano model ship has been completed, take one of those sails and introduce the mast created on the previous post through the large rings. Then, take the wire of the mast with the sail that you had bent to 90ºand insert it into the hollow part provided for it, below the top. Thus the upper part of the sail remains fixed to the mast. On the lower area of the mast, take an M18 part and insert it. Apply cyano to adhere it and remove excess glue with paper. The final result should be this -repeat the process with the other three sails-:

Jar of cyano on hand! On the four holes of the deck to place the masts, apply adhesive and insert them. Use the steel rule to calculate the vertical 109 mm and to check the distance between masts. Also, it can help you position the masts while the cyan dries. The end… For now!

BUILD JUAN SEBASTIAN ELCANO MODEL SHIP: SHROUDS (PART I)

Step 17 when a modeler wants to build Juan Sebastian Elcano Model (22260), the Spanish training ship, talks about the ‘Shrouds’. Extract with a cutter and paint with off-white colour (27702) the eight WS1 parts. Grab one of these. With a pencil and a ruler, mark five equidistant points on the part. Put cyano on the part CT2 of 200 mm and glue it on the first marked point using Straight Fastening Tweezers (27020).

Repeat the process with the other three CT2 parts. On the last position marked with pencil, do the same thing with a 300 mm CT2 part. In total, there should be five threads attached to part WS1. Cut the excess of thread on one side of part WS1 with Thread Snips (27060). and paint off-white the glued part of the five threads with a brush.

Repeat this task again with the other seven WS1 part to get this:

It is time to glue those eight resulting parts. Take one and put cyano on the bottom. Glue the part to the edge of the hull, but be careful. The area where the threads are glued must look at the deck, that is, the part of the threads that are glued must not face the outside of the boat, but the inside. Repeat the process with the other seven parts so that it looks like this:

BUILD JUAN SEBASTIAN ELCANO MODEL SHIP: SHROUDS (PART II)

Take the longest thread -300 mm- from each of the parts and tie it around the tip of the nearest mast. Using a flat-grip plier, tie it securely by tying it into a knot and pulling the string so it is tight. Apply ciano to the knot made with the thread at the end of the mast and remove the excess of thread with Thread Snips (27060). Remember to repeat another three times this step on the other three mats.

Now do the same with the rest of the short threads -200 mm– but gluing them to the lower/interior part of the four tops. And finally, glue all the CT2 threads perpendicular to the already installed vertical threads. In this way, it will be ongrid mode. To do this, with patience, you must cut the threads with precision according to the height that you adhere them horizontally. And… Wow! Let’s have shrouds.

BUILD JUAN SEBASTIAN ELCANO MODEL SHIP: FIGUREHEAD & BOWSPRIT

We continue with Step 18 of Build Juan Sebastian Elcano model sailboat (22260). This is about the ‘Figurehead and Bowsprit’. Paint gold colour (27761) the part M19. Apply cyano to the inner bottom of the figurehead and stick it to the tip of the hull’s bow with your hands. Remember that if you want to place the Chilean emblem of the training ship Esmeralda, you must do the same with the part M20.

Then take the BSP part. With a ruler and pencil, mark the half of the part. Mark well with a cutter. With a manual drill and a 1 mm diameter bit, drill on the previously indicated place. Take a BW2 part and cut a 16 mm piece with Professional Straight Cutting Pliers (27212).

Take a BL part and surround the BSP part with your two wires. Help yourself with a Needle Nose Pliers (27213) for turning both ends of the wires around stick, tying the part to it. Get rid of excess wire once knotted to the stick. Repeat this process three more times on the BSP part. From the top point to where the hole is on the center of the stick. It is the turn of the part BW2, apply cyano in the centered hole made before and insert the part BW2.

By hand, fold down all four BL parts, apply cyano to the bottom end of the stick, and glue on the designated area. We already have bowsprit too!

MINIATURE REPLICA JUAN SEBASTIAN ELCANO SHIP: SAILS (PART I)

The ‘Sails – Part I’ is Step 19 of the video tutorial to build Juan Sebastian Elcano model ship. Take three parts S2, that is, three sails. Repeat the process you did on the ‘Masts – Part II’ section. In this case, the six parts are BR1 -small rings-. Place one part BR1 in one corner of the sail and the other five longitudinally and equidistantly on the other side.

Drill with a 0.75 mm hand drill the 4 masts at the height shown on the video. Pass thread -part CT2– through the five rings of the sail. Tie the sail with its thread to the top of the mast you are working on. Once the knot is done, apply cyano to it. Thread the other end of the sail string through the hole you just made on the next mast. Pull the thread until the thread and the sail is taut. Knot and cyano. Remove the rest of the thread with Thread Snips (27060). Repeat with the other two remaining sails.

Go back to the first sail placed, take more thread -part CT2-. Tie it to the first mast, above the top, at the height of the horizontal peak of the sail. Once tied, take it up to the second mast and knot it at the same height. Now the same thread, bring it closer to the third mast, and lastly to the fourth one. Help yourself to do this with Curved Fastening Tweezers (27021). Finally, put cyano on the fourth neck knot and cut the excess thread with our Thread Snips (27060).

MINIATURE REPLICA JUAN SEBASTIAN ELCANO SHIP: SAILS (PART II)

We continue with ‘Sails – Part II’, which is Step 20 of the construction of the model of the famous Spanish school ship (22260). Arrange a unit of parts S3, S4, S5 and S6, that is, sails. Take part S3, put nine rings -part BR1- on the longest side, and one on the corner. Then, take thread -CT2- and tie it at the end of the mast. Pass the line through the nine rings, tighten and knot it and glue it to the nose of the bowsprit previously installed. Repeat the same process with part S4, but with seven rings on the side and one on the corner. Remove excess string from the bowsprit of both sails. And the same with parts S5 and S6.

Next, more thread, this time, tie it to the point of the bowsprit, pass it through the metal -underneath the mast- and by the ring in the middle of the prow of the hull -the second-. Tie it there. Do the same with a second thread: knot it at the height of the rope of the third sail on the bowsprit, passes it through the upper ring and tie it. In all cases, remove the excess thread once tied. Repeat this process on the other side of the boat, so that the thread also enters through those rings. Finally, a third thread that will go through the lower ring on both sides of the bow.

Read the second part of the post…

Read the fourth and last part of the post…

Model Building

Parkinson’s and Modeling: The Will to Overcome Obstacles for the Love of a Hobby

Posted on January 11, 2023January 12, 2023 by Administrador DelBlog

We start 2023 with a true story. This comes to reflect the spirit of overcoming human beings facing the difficulties that arise in life. You may be wondering what is the relation with our fans… Well, a lot! Not even the most serious illness stops man/woman’s will to fulfill his/her dreams and entertainment. Parkinson’s and modeling can also go hand in hand, although it is hopelessly and unfortunately trembling. Christopher Columbus, with his efforts, discovered America. Our dear modeler friend Frédéric Lavoine, with his passion, has conquered something more important: all our hearts.

It’s been almost two years without him being able to work in the beautiful profession of school driver that he left because of this terrible disease. Too many risks. He was 54 and a half years old when the doctors diagnosed it, but it seems that eighteen months earlier it began to knock on his door warning him of its presence.

PARKINSON’S AND MODELING: FRÉDÉRIC, THE REAL MCGYVER OF OUR TIME

Frédéric was brilliant at his job, and among people with disabilities and reduced mobility. Furthermore, he could never imagine that his “future working life would be reduced to the list of problems and difficulties caused by Parkinson’s”, assures our friend, who also emphasizes that he was “an active person with resources”, even his wife calls him McGyver after the famous television series in which the protagonist finds practical solutions to any problem. Without egocentrism, Frédéric is a “passionate lover of manual well done labor”, he says. Of course, he recognizes that the only thing that resists him is mechanics.

With all the pending things he has to do and now he can’t because he’s not able to deploy all his ‘superpowers’… A big disappointment for him. Frédéric’s world falls on him, a moving yo-yo in comparison to the perpetual activity of our friend. Painting a picture, reforming the cabin, restoring a piece of furniture, taking care of the garden… All that is over.

It is the moment in which Frédéric decides to take another course to continue being our particular McGyver. With this cold winter coming up where you spend a lot of time at home, you have to keep yourself busy. It is true that he was discouraged by the tremors of his hand and by the blockages of his joints. Medical treatments cannot give him a complete cure: “I didn’t want to draw or write in my book, I was stuck on the blank page”, says Frédéric. The ‘beast’ in the cage will start roaring at his wife and daughter, who encourage him to keep his hands busy sewing, which he loves. But it is not enough for him, so the memories of his childhood and his solidarity actions make him consider returning to modeling.

HIS NEW CHALLENGE, BUILD WOODEN MODEL SHIPS

“Build models with modeling instead of destroying as Parkinson’s does”, emphasizes Frédéric. That is their motto. Parkinson’s and modeling necessarily go hand in hand in his current life, but the passion for model building becomes his particular fight and his leisure against this serious disease. Our friend remembers that building “model ships, planes and cars was a true passion forty years ago”.

Of course, doubts about his ability to develop this hobby plague him: “Will I still be able to model, glue or paint such small parts?, he wonders. To which he answers that it will be his new challenge and that, to “complicate it even more”, he will assemble a wooden model ship. Because, for Frédéric and quite rightly, “if it were made of plastic everything is molded and formed, but with a wooden one you have to cut, mold, take time… Anything that is not compatible with Parkinson’s“.

PARKINSON’S AND MODELING: HEALTH BENEFITS OF ASSEMBLY MODELS

In December 2020, Santa decides to go down his chimney to give him “the magnificent naval modeling kit with the paddle-wheeled steamboat King of the Mississippi“, smiles Frédéric. As if he were a child with a new toy, he decides to quickly ‘inspect’ the contents of the box: “Lots of parts of wood, many small items -too many- and my shaking hand…” , says our friend. For this reason, at first, he leaves aside its assembly. It has to be his relatives who encourage him to start building the model and Fréderic sets up his ‘mini workshop’ at his office, as he describes it.

Since we already know that Frédéric is the McGyver of our time, of course, he doesn’t want to assemble the model “foolishly” following the plans for it. No, for what! :). So take the path of building a unique model, according to his taste. He begins in January 2020 and ends in May of the same year, barely 5 months later, quite an achievement from our point of view. In his own words, building the model is “an enormous pleasure” for him. He dedicates hours and hours to it, “not out of obligation but out of necessity”, he stresses.

Thanks to the King of the Mississippi, he forgets his hand tremor and the rest of his symptoms. This is due to, as Frédéric says, “the meticulousness and slowness of the tasks that the hobby requires”. Parkinson’s ‘disappears’ and modeling resurfaces after more than four decades buried. What’s more, these modeling demands act on Frédéric as “relaxing for the spirit”, exclaims our friend, who also asserts that, in this way, he recovers “harmony between body and mind”. What conclusion do you reach? That modeling is fully compatible with Parkinson’s.

PARKINSON’S PATIENTS MODELING ASSOCIATION NEEDS A PLACE WITH CEILING

Since he can’t sit still, he creates a modeling association for people with Parkinson’s, including its statutes and internal regulations. He calls it ‘Les Mains Agiles – Club de Modélisme’. Its main objective, very interesting: to share and teach other enthusiasts who suffer from this disease the love for the construction of static models. Frédéric even got to meet with the president of the Vendée France Parkinson’s Committee, Michel Parsy, who approved his initiative.

However, then a setback arises. Frédéric tells him about his difficulties in finding a place and opening a bank account as he is not a professional. Resigned at that moment, he warns us of what we already know: “For a bank and its owner, being disabled, no longer working and having weakened personal income do not give credibility to a president and his association”, he states emphatically.

With Parsy’s encouragement, Frédéric writes an article to present his project to society on social media and on the Inter’Park85 newsletter that belongs to France Parkinson Foundation. On the one hand, he needs a room or premises -a space with a ceiling and walls, in short- of at least 30 square meters. With one or two rooms and access for disabled people. This space must be in the city of La Roche -sur- Yon or its vicinity with a nearby bus service. On the other hand, obviously, he needs elements to equip it with basic materials and tools. Frédéric has ready a list of it.

In February 2022, due to the hieraticism caused by the Covid pandemic period, Fréderic had to dissolve the old association to create a new one under the name of ‘Une Main Vers l’Horizon – Modélisme’. Since then, he has been trying to give life to no avail.

HOW TO CONTACT FRÉDÉRIC LAVOINE?

Modelers Friends around the world and Artesanía Latina friends, let’s help Frédéric to fulfill his dream! No disease can against modeling lovers. In addition, this hobby has beneficial effects on the health of patients. So that the modelers can help him, he have given us an email in which you can ask what he needs that suits each one’s budget. Little by little or if there is a modeler friend with high purchasing power among us… The association for modeling with Parkinson’s must be a reality!

We kindly indicate Frédéric Lavoine email address: [email protected]

Ship Models

Corsair Model Ship in Wood Le Renard: The Cutter from Saint Malo, Symbol of French Naval Identity

Posted on December 15, 2022December 15, 2022 by Administrador DelBlog

Prolific year this 2022 -that we are about to finish- for the creation and renovation of ship model building kits by Artesanía Latina’s team. And we end… With another unbeatable surprise for our modelers friends! The renovated French corsair model ship in wood Le Renard (22401). At 1:50 scale, this faithful miniature replica of the Galic cutter is recommended for fans of this hobby with at least an intermediate level of skills and knowledge.

Due to this new edition, you will not be forced to create or manufacture any of the required parts, as was the case with the old one. In addition, we have the Official License of the Association Cotre Corsaire de Saint-Malo. Thanks to it, since 1991, a replica of the original boat still sails the seas and oceans. Chapeau for your work! So let’s get to know the contents with which the corsair model ship Le Renard is assembled. The famous corsair Robert Surcouf, at the service of Napoleon, was in command of this.

CORSAIR MODEL SHIP LE RENARD: MODELING KIT CONTENTS

Le Renard cutter model was a sailboat with which attacked and seized the enemy commercial ships of France. Now it has improved contents. The model building kit contains all the necessary parts to build the corsair model ship. Its greatest achievement was defeating in combat the English schooner HMS Alphea in 1813. Its assembly system by means of a false keel and frames brings its construction closer to that of a real sailboat.

This reedition of the Le Renard naval modeling kit comes with board parts cut by high precision laser, birch wood, brass, cast iron and sails ready to be placed. Of course, the exhibition base with a metal plate is included so that you can display your model once finished.

To achieve this goal, our modelers friends have very complete step-by-step instructions on DVD format for computers. In Spanish, French, English, Italian, Portuguese, German and Dutch. We also include all the explanations related to the simple and fun assembly of the rigging. Remember that printed instructions are not included. Also, you can download these instructions for free at Le Renard product sheet (22401).

Por cierto, cuando esto ocurra y quede ensamblada, la maravillosa maqueta del barco corsario galo medirá 615 mm de largo, 238 mm de ancho y 560 mm de alto.

CUTTER MODEL LE RENARD: LIFEBOAT AND CANNONS

You will be dazzled when you build it! Among other reasons, pay attention to the beauty and high level of detail, in general, and the lifeboat, in particular, of its stern, which will shine splendor.

What to say about its imposing and fabulous 10 cannons made of metal!

Get the best finishing with the new Set of Acrylic Paints for Le Renard (277PACK18). Water-based and quick-drying, your French corsair ship model will be much more realistic. Contains 6 jars of 20 ml each with the following colours: Off-White, Off-Black, Chequer Yellow, Burnt Umber, Vermilion and Bright Green.

In short, after more than three years missing in the ‘Bermuda Triangle’, the wooden model ship of the French corsair cutter Le Renard (22401) is out of darkness. It is already at Artesanía Latina‘s stores to the delight of the modelers who were waiting for it… And there are many of them according to the emails received! Go privateers, build your ship!

Model Building

Modeling on Black Friday 2022: Take Advantage of the 15% Off on Model Ships, Planes and Carriages, Tools and Accessories!

Posted on November 22, 2022February 23, 2023 by Administrador DelBlog

It’s here, the campaign awaited by all our modelers friends has arrived. Yes, we celebrate Modeling on Black Friday 2022 with Artesania Latina! The complete online catalog of products, the largest on the market, with a 15% off! And this year… We’re giving you one more day to take advantage of the offers and make your purchases with greater peace of mind!

In the last edition of Modeling on Black Friday 2021, we started on Thursday, now we start on Wednesday! From November 23rd at 12:00 a.m. (CET) to Sunday, November 27th at 11:59 p.m. (CET), your opportunity to advance the purchase of Christmas gifts, everything you want and need. Wooden ship models, aircraft models in wood, metal and photo-etched, models for children, tools for modeling, naval accessories and paint sets to achieve the best finishes on their mini replicast. And much more!

The more products you add to the cart during our Modeling on Black Friday 2022, the lower will be the invoice, euros savings -or dollars, depending on the country from which you visit the web-. It may be that you have been wanting to build one of our models that is priced a little out of your budget for months. At your workshop, you realized that you required specific tools to be able to better build a part of the miniature. You were eager to complete your artwork with an accessory to, for example, illuminate it once it was built. Or, simply, you were waiting for these dates to collect numerous kits and other products… Well, this is the moment! Don’t forget, five days with a 15% Off!

2022 NEW PRODUCTS FOR MODELING ON BLACK FRIDAY: SHIP MODELS

During the last three years, the team of professionals at Artesania Latina has been concerned with continuing designing and creating more reasons for satisfaction and entertainment for our loyal customers -there are already more of 50 years with your confidence-. There are seven new and renovated models of illustrious banners of naval history. In winter, we brought two traditional models from our house back to the market. We completely redesigned them so that the assembly experience was optimal. Parts that fit precisely, redesigned instructions and a brand new image that can be seen on the presentation of their boxes.

On the one hand, the wooden miniature for modelers with an intermediate level of the French tuna boat Marie Jeanne (22175) at 1:50 scale. On the other hand, the wooden model of the HMS Endeavour’s captain’s longboat (19005), also at 1:50 scale, but aimed at those who want to get started on naval modeling or those who are advanced modelers and want to add it as a companion to its mother boat HMS Endeavour (22520).

Spring brought us the return of the model of the French frigate Hermione La Fayette (22517-N) at 1:89 scale. A fantastic reissue of the ‘Liberty Frigate’ for modelers with an advanced level.

In the summer, we introduced two more top sellers after undergoing improvements. On the one hand, the beautiful American schooner Virginia (22115) at 1:41 scale for beginners. On the other, the surprising Dutch fishing boat Botter (22125) at 1:35 scale for hobbyists with intermediate skills.

In autumn, two models that are highly requested by our clients. Two jewels of naval modeling. The American schooner Harvey (22416) at 1:60 scale with intermediate difficulty and the expected Spanish ship of the line Santa Ana (22905-N) at 1:84 scale for the elite modelers.

GIFT PACKS WITH MODEL, PAINTS, FIGURES AND TOOLS: DOUBLE PRICE REDUCTION

If the person reading this post is a relative or a friend of a modeler whom you want to surprise soon, our products are sure success, it will be greatly appreciated. Don’t know what to give away? To help you, we have launched a whole series of Gift Packs that include the naval or aerial model, the paintsthat must be used on it, the figures that give it life and some fundamental tools during the construction process. They are very varied, so take a look and choose the one that you like the most as a gift for the dates that are approaching.

You can also give it to yourself! The Gift Pack already has a reduced price compared to if you buy the products separately… Well, also add 15% off from the price during this season! Modeling campaign on Black Friday 2022!

TOOLS FOR MODELING ON BLACK FRIDAY 2022

From this Wednesday, November 23rd at 12:00 a.m. (CET) to next Sunday, November 27th at 11:59 p.m. (CET), both included, we celebrate these days of online sale of Modeling on Black Friday 2022 –what is it-. That 15% off also comes as a glove to get the tools that are missing at your workshop: loose tools, micro, in set and specific for naval modeling.

As a great novelty in 2022, we have released one of the most useful instruments for naval modeling: the Waterline Marker for Model Ships (27649). You can now draw with a pencil on the hull of your model ship. Accurately, your pulse won’t quiver. It was one of the biggest requests from our modeling friends, fulfilled!

MODELING ON BLACK FRIDAY 2022: FIGURES AND ACCESSORIES

When you finish your model, it still asks you for some detail to make it perfect. In this case, add to your ship the set of figurines corresponding to your model in order to make it look even more real. Made of metal and ready to be assembled – use our cyanoacrylate (27650)- and painted, get a 15% Off on these figurine sets. Any type of vessel cries out for its crews and passengers on deck. Remember that, for sale separately, as a new 2022 two packs of acrylic paints are available to paint them. The Basic (277PACK14) and the Advanced (277PACK15).

You can also illuminate your model if you have LED pre-installation or if you have created it yourself with Set of LED Lighting for Models and DIY Projects (27590). Perplexed to see your ship model in light! On the other hand, have your own spare parts by taking a look at the section Accessories.

PERFECT FINISHES WITH THE NEW WATER-BASED ACRYLIC PAINTS

If you want to achieve the best finish on your model, this 2022 we have also expanded the assortment of fast-drying water-based acrylic paints loose or on sets for specific scale models. Without forgetting all our airbrushes, brushes and other tools so that your miniature replica looks as it should. Yes, yes, everything with a 15% off as well, until next Sunday the 27th!

In short, take advantage of this opportunity offered by Modeling on Black Friday 2022 by Artesania Latina to get… Everything you dream of!

Ship Models

Fishing Ship Model in Wood (II): New Miniature Replicas and Rest of the Catalog

Posted on November 17, 2022October 13, 2023 by Administrador DelBlog

We continue on this post showing our modelers friends each fishing ship model in wood from our catalog. On this time, we are going to talk about the new modeling kits of this type of boat that Artesanía Latina has created for 2022 and the best sellers. On the previous publication, we left it in the fishing boat models for amateurs with at least an intermediate level of skills and knowledge. We go on, then, with that degree of difficulty in the construction of the miniature replicas with one of the two novelties of this year. Afterwards, we will review the traditional scale model of fishing boats for advanced modelers.

FISHING SHIP MODEL IN WOOD: FRENCH TUNA BOAT MARIE JEANNE

How beautiful! Artesanía Latina modeling team has done a great job to present this year that is almost about to finish one of our novelties. They have completely redesigned the wooden fishing ship model of Marie Jeanne tuna boat (22175), the traditional 1:50 scale French boat that currently delights fans of naval modeling. We have exponentially improved its assembly experience, being friendlier, thanks also to its high-quality parts. By the way, this model is perfect for those fans with an intermediate level and for those who wish to have a first contact with rigging. Look at the resulting model!

Regarding the contents of the ship modeling kit with the fishing ship model Marie Jeanne, which has sailed since 1900 until 1950, these have the highest quality standards. Parts that fit together perfectly: board pre-cut by high-precision laser, hardwoods, photo-etched, brass and cast iron parts, as well as hand-cut and hand-sewn cotton sails ready to be placed. As a gift, the modeler can display the model thanks to its wooden exhibition base with a metal name plate. It can be illuminated with LED Lighting Set (27590), sold separately. To assemble the model, very precise step-by-step instructions on DVD format for the computer. Once the wooden miniature of the tuna boat is built, it measures 22.24” (565 mm) length, 4.52” (115 mm) width and 19.48” (495 mm) height.

If you want to achieve great finishes and make it look absolutely real, what better than painting it. We recommend your new Water-based Acrylic Paints Pack (277PACK12), with eleven different fast-drying colors, for sale separately. The modeler will appreciate that the results are spectacular.

FISHING SHIP MODEL IN WOOD: BOTTER, THE DUTCH FROM MARKEN ISLAND

Another of the magnificent novelties in 2022 is the model of the Dutch fishing boat Botter (22125) at 1/35 scale. Simply, a jewel of naval modeling for modelers with an intermediate level. Now, with a revamped image and a renewed construction process so entertainment is assured and headaches caused by parts that don’t fit have been eliminated. The fishing boat from the Island of Marken that sailed the Zuiderzee Sea will not disappoint those who ride it, on the contrary, they will be enthusiastic. It was, is and will be one of the most beautiful models for its details and for being different from the others!

Talking about the contents of the Botter, this contains high precision laser cut board parts, hardwoods, brass, cast iron and hand-sewn cotton sails ready to be placed. On this new edition, it gives us a beautiful wooden exhibition base to build with a name plate. As regards the instructions for its assembly, these come on video and on DVD for computers (Windows and Mac). Our modelers have built the model recording with their cameras the assembly of each part. Remember that to watch the complete video instructions and for free you must go to our Youtube channel. Assembled, it measures 18.70” (475mm) length, 4.52” (115mm) width and 14.76” (375mm) height.

Get the best finishes so that the faithful miniature replica of the Botter is identical to the one that sailed the seas for centuries, paint it! We suggest its new Water-based Acrylic Paints Pack (277PACK20), with six different fast-drying colors, for sale besides. The modeler will realize that it has been totally worth it.

FISHING SHIP MODEL IN WOOD: BLUENOSE II, THE CANADIAN SCHOONER THAT RACED TOO

The last fishing ship model for modelers with at least an intermediate level of skills and knowledge is the Canadian schooner Bluenose II (22453). It was also dedicated to regattas during the last 20th century. Made of wood and on a 1:75 scale, the faithful reduced-size replica of the Bluenose II has a construction system using a false keel and frames that brings the assembly of the model closer to the real boat. Without pretending to lack modesty, this model of the schooner made by Artesanía Latina is the best on the market for its quality and details.

Contents of the Bluenose II, this one comes with high-quality precision laser-cut board parts, precious hardwoods, brass, cast iron, cotton threads and hand-sewn sails ready to be placed. Its instructions on DVD for computers are also the most optimal compared to those of other firms. Once it is fully assembled, this wonderful historical model measures 27.16” (690mm) length, 4.33” (110mm) width and 22.44” (570mm) height.

FISHING SHIP MODEL: MARINA II, THE TRADITIONAL TUNA BOAT FROM CANTABRIAN SEA

We now enter the world of advanced modelers with the first wooden fishing ship model for this level. The traditional bonito and tuna boat from the Cantabrian Sea Marina II, at 1:50 scale. This exact miniature reproduction of this type of boat is one of the best sellers worldwide, along with its colleague Carmen II, which we will talk about later. It is a classic model that should be present on any collection of fishing boat models. It just… looks like the real tuna boat!

Concerning the contents of the naval modeling kit Marina II, its box comes with parts of board cut by high precision laser, hardwoods, brass, cast iron and cotton threads. Assemble the scaled-down replica with our comprehensive, full-color step-by-step guide, accompanied by ship plans, on DVD for PC. Assembled, the model measures 24.01” (610mm) length, 6.18” (157mm) width and 17.71” (450mm) height.
Do you want your model to look like the original? Painting it is totally necessary, especially with its new Water-based Acrylic Paints Pack (277PACK3), which also can be used for the model of Carmen II, with twelve different fast-drying colors, sold separately. There is no doubt that the results will be spectacular.

CARMEN II, THE MOST FAMOUS TUNA BOAT IN THE WORLD

The last wooden fishing ship model for advanced level and in general from the wide assortment of Artesanía Latina is the well-known tuna boat, also from the Cantabrian Sea, Carmen II (18030) at 1:40 scale. Another of the top sales of our firm around the globe. The fishing method of these tuna vessels is trolling and live bait, also that of the Marina II. Hurry to assemble the Carmen II before stocks run out! We will surprise you in the future with great news related to this wonderful model.

What are the contents Carmen II kit brings? All the parts you need to assemble the tuna boat: board cut by high precision laser, hardwood, brass, cast iron and cotton threads. At the time of assembly, you have our complete step-by-step guide, accompanied by the plans of the finished model, on DVD format for your computer. We remind you that none of the naval modeling kits come with printed instructions.

With this last model of fishing boat, we have reviewed all the existing ones on our catalogue. You have to choose! In addition, we offer faithful miniature replicas for modelers with different levels of difficulty. Start with the one that best suits yours… and then increase the complexity with another superior model! Cast the nets to ship modeling!

Read the first part of the post…

Ship Models

Fishing Boat Models in Wood (I): Historic and Traditional Ships Full of Elegance and Created in Detail

Posted on November 3, 2022October 13, 2023 by Administrador DelBlog

The varied and elegant fishing boat models in wood to build by Artesanía Latina are one of the firm’s greatest exponents. Even the smallest detail is thought through when designing any of our fishing boat models. Hence the success of our naval modeling kits. The modeler has high quality parts, numerous and beautiful decorative elements and some precise step-by-step instructions. Everything so that your assembly experience is fully satisfactory with the faithful replicas of the boats from our catalogue. That is why we are going to review all the fishing boat models, we are even going to show them according to their level of difficulty when assembling them.

For beginners, the fishing boat models La Provençale (19017-N), Providence (19018), Bon Retour (19007) and Saint Malo (19010-N). For modelers with an intermediate level, Mare Nostrum (20100-N), Marie Jeanne (22175), Botter (22125) and Bluenose II (22453). The advanced ones can enjoy the miniatures of the Carmen II (18030) and Marina II (20506). It is one of our future goals to create some for the most expert, time to time!

FISHING BOAT MODELS: LA PROVENÇALE, FROM THE FRENCH CÔTE D’AZUR

One of the two top sales products of our current catalog, along with Providence. The value for money and its beauty make La Provençale (19017-N) one of the essential fishing boats models on your collection of naval modeling. It is a cute boat from the French Riviera. At 1:20 scale, it is aimed at beginners modelers. Do you want to get started on this hobby or give the kit away so that someone can build their first scaled-down model? It is perfect for it. It will delight anyone who desires to begin on it or who wants to have it even with greater skills and knowledge in the field.

The modeling kit of La Provençale brings parts of high-precision laser-cut board sheets, set of wooden strips and round dowels, and accessories in die-cast, brass and wood. Not forgetting its set of cotton sails, pre-sewn by hand ready to be placed, and cotton thread. As a bonus, a beautiful wooden exhibition base to assemble with a name plate. For its assembly, it has an excellent and very complete step-by-step guide made on video by our modelers. As if it were an exclusive masterclass. Just visit our Youtube Channel -click here- where you can find all the recorded video tutorials. The kit comes with a printed plan of the finished boat and a list of parts. Does not contain printed instructions. Once built, it measures 12” (305 mm) length, 13.98” (335 mm) height and 3.93” (100 mm) width.

FISHING BOAT MODELS: PROVIDENCE, THE NEW ENGLAND WHALING (MOBY DICK)

Another of the fishing boat models from our best-selling catalog throughout the world: Providence (19018). The excellent and beautiful New England whaling ship of the 19th century, which appears in fictional literary works such as Moby Dick. Imagine six men fighting a whale in the open sea and with a boat of this type… Brutal! At 1:25 scale, it is ideal for beginning modelers like the model above. Of course, due to its details, for example, made of cherry wood, the most experienced modelers will be enthralled. By the way, these first two naval miniatures make a good couple so… Build them at your workshop! They are essential for your collection.

Regarding the contents of the modeling kit, Providence comes with precision laser cut board parts, hardwoods, brass, cast iron and hand-sewn cotton sails ready to be placed. For its assembly, you can follow our complete step-by-step guide in full color that can be downloaded for free on its product sheet in the ‘Instructions and Downloadable Content’ section. To do this, you can also scan the QR code on the printed boat plan and parts list that comes with the box. The kit does not contain printed instructions. Once it is assembled, this fantastic model measures Length 12.20” (310 mm), Height 9.44” (240 mm), Width 3.07” (78 mm).

FISHING BOATS: BON RETOUR, FROM LA RADA OF BREST (FRANCE)

The third of the wooden fishing boat models that we introduce you is the Bon Retour (19007). It is a faithful mirror of the French boat of the Rada de Brest, but on a 1:25 scale. First built in 1952, it was in use until the 1980s. The fishermen used it for scallop fishing. Currently, a Gallic association for the preservation of the history of navigation called Tud Ar Mor keeps and cares for the original small sailboat, restored just thirty years after its creation by Guy Le Cornec. Designed for beginners modelers, the model is liked by anyone who sees it for the shape of its hull, for the sails and for the fun it produces during its assembly process.

Speaking of the contents of the modeling kit Bon Retour, obviously, the box has all the parts that the naval modeling fan requires for its construction. Its high-precision laser-cut board parts, hardwoods, brass, cast iron and cotton sails ready to be placed should be highlighted. In addition, as a gift it includes the wooden base with name plate for its exhibition. And you can not miss its assembly guide on DVD for computer -it does not contain printed instructions-. Once the model is assembled, it measures 15.55” (395mm) length, 14.60” (371mm) height and 4.05” (103mm) width. Do you want to see better what exists in the box? We open it on the video below these lines.

FISHING BOATS: SAINT MALO, THE LATE 19TH CENTURY FRENCH DORIS

The fourth proposal on this post about fishing boat models for beginners modelers is the French doris from the end of the 19th century called Saint Malo (19010-N). This type of sailboat, firstly, sailed along the American coast of Massachusetts and Nova Scotia, to later make landfall in European countries such as Spain, Portugal and France. They were used for cod fishing in cold waters and were transported in larger vessels. At 1:20 scale, the faithful miniature replica reflects the naval history of two continents.

The contents of the modeling kit of Saint Malo, has high precision laser cut board parts, hardwoods, brass, cast iron and cotton sails. If you want to assemble the model, watch the video tutorials made by our modelers on our YouTube channel. It does not contain printed instructions. The kit comes with a printed plan of the finished model and a list of parts. Once it is built, this faithful miniature replica measures 13.58” (345mm) length, 3.54” (90mm) width and 8.66” (220mm) height.

FISHING BOAT MODELS: MARE NOSTRUM, THE TRADITIONAL MEDITERRANEAN FISHING SHIP

One of the banners for decades of Artesanía Latina, redesigned several times, is our first fishing boat model alternative for modelers with an intermediate level of skills. The Mare Nostrum (20100-N) is the typical motor boat from the Mediterranean Sea, many are fishermen from coastal European countries who today still they use. At 1:35 scale, the model is an exact copy of those that sail. Thanks to its spectacular finishes and details, it also seduces the most experienced too.

The level of detail is astonishing. Boxes for fish, cabins, a detailed engine, a winch to collect the cable, and at the stern, protruding from the hull, a rigging with pulleys to pass it during trawling… Just look at the images below. In this sense, the modeling kit of Mare Nostrum comes with precision laser cut, brass and cast board parts, all of them made of the highest quality. When built, the model measures 16.14” (410mm) length, 10.62” (270mm) height and 4.13” (105mm) width. This is the typical and traditional model that should be at all workshops. It’s already all over the world, what are you waiting for to assemble it!

PAINTS FOR FISHING BOAT MODELS

If you want to paint this and many other fishing boat models, Artesanía Latina team has created two specific paints sets for this type of boat. The paints are acrylic and water-based. They dry very quickly and allow to achieve the most reliable and pretty finishes. The first of the sets is the Basic (277PACK13), which is used precisely for the Mare Nostrum. The second of the sets is the Advanced (277PACK3), with which the Mare Nostrum, Carmen II and Marina II are also painted, which we will talk about on the next post among others.

On the next post we will continue explaining what the remaining reduced models of this type of boat are, including the novelties of this year.

Read the second part of the post…

Ship Models

Harvey Model Ship in Wood at 1:60 Scale: Renewed Naval Modeling Kit with the Fabulous American Schooner from the 19th Century

Posted on October 13, 2022October 13, 2022 by Administrador DelBlog

We are almost finishing a year 2022 full of surprises. We have created new wooden ship models, innovative tools and we have reissued and improved numerous naval classics from our collection of naval modeling. For many years, there have been several models that we have not been able to manufacture but that have always been in our minds to sell them again. Our modelers friends demanded it that way. This is the case of the latest addition to our extensive catalogue: the renewed Harvey Model Ship (22416) in wood and at 1:60 scale.

Another great modeling kit made by Artesania Latina, this time, with the fabulous American schooner of the 19th century. It is aimed at modelers with at least an intermediate level of skills and knowledge on this wonderful hobby. Below these lines you can watch the presentation of the faithful miniature replica of the Harvey thanks to a spectacular video.

CONTENTS HARVEY MODEL SHIP: WOODEN MODEL BUILDING KIT

This wonderful wooden model ship of the Harvey, a 19th-century American schooner, has eight cannons and extremely fine details on deck. This gives greater weapons power to this historic American boat. It is a clearly reminiscent of the lines of the old coastal schooners of the 1860s in the United States. Inescapable its construction by any modeler who wants a complete collection. Let’s check what are the contents of the kit, all of them with the highest standards.

With this new limited edition, the modeler has highest quality parts such as precision laser cut basswood plywood and hardwoods (strips, rods and veneers). In addition, a photo-etched sheet in brass and die-cast with decorative parts to get a higher level. Without forgetting its sails with cotton fabric and flags -ready to be placed- and cotton and steel threads.

As a gift so that the model is perfectly exposed, a wooden exhibition base with a name plate prepared for the LED lighting (this system is sold separately).

Next, we open the kit box. Check with this video the model ship contents of the Harvey American Schooner (22416)!

ENHANCED INSTRUCTIONS FOR HARVEY MODEL SHIP

Harvey model ship has a DVD for computer (Windows and Mac) with completely redesigned instructions. With real step-by-step photos that clarify everything. On this way, we have improved the assembly experience for our modeler friends. Now, the construction process will be much more enjoyable. Printed instructions are not included. Remember that you can also download the instructions for free at product sheet for this model on the Artesania Latina website.

Once Harvey model ship (22416) is assembled, it measures 26.77” (680mm) length, 19.29” (490mm) height and 9.84” (250mm) width.

SET OF ACRYLIC PAINTS FOT SCHOONERS MODELS

Achieve the best finishes for your 1:60 scale Harvey model ship. Paint it with the Harvey Schooners Acrylic Paints Set (277PACK21), for sale separately. It contains 12 bottles of 20 ml with water-based and fast-drying paints. Available colors are Off-White, Off-Black, Buff, Bright Red, Cocoa Brown, Burnt Umber, Hull Green, Gold, Gun Metal Gray, Garnet, Hull Dark Green and Semi-Gloss Dye Varnish Oak Shade. We recommend the use of airbrush for painting, although the modeler can also do it with brush.

These schooners are a type of sailboat defined by their rigging. They have a fast hull and sail with good ability to sail to windward. They transported cargo and fish, but they were also used for security issues like corsairs did. In short, with the model ship of Harley American Schooner (22416), modelers will have a very fun assembly experience. It is a beautiful jewel of ship modeling. Now available for you to assemble at your modeler’s workshop!

Modeling Tools & Accessories

Cutting Tools for Modeling and Crafts (I): Wide Catalog of Products for Different Applications

Posted on September 9, 2022October 5, 2022 by Administrador DelBlog

Artesanía Latina cares about creating all the products that the modeler needs when she/he is building her/his model ships or another type. This is the case of the cutting tools for modeling and crafts. Now, we have a wide and renewed catalog with many specific tools that will make the task easier for any of our friends.

Cutting parts of wood or threads, removing burrs or leftovers and sawing certain parts during the assembly process are three of the most common actions. Well, here you have all the necessary cutting tools for modeling. Cutters, saws, guillotines, scissors, blades… Choose the ones you need!

CUTTING TOOLS FOR MODELING: CUTTERS

One of the top cutting tools for modeling and crafts, the cutters. We have universal cutters #1 and #5. The most popular in our catalog is the Cutter #5 with Ergonomic Handle and 5 Blades (27044). Why? Because, in addition to cutting with blades, it can also be used for Micro Saw Set (27302) and for the Saw Blade (27042). This cutter also comes with a protective cap to prevent any type of cut.

Another #5 Cutter from our catalog is the Professional Scalpel Type with 6 Blades and Case (27028-1). We introduce it to you and show you how to use it on the video below.

As for the #1 cutters, those with a scalpel are the best. On the one hand, the one that comes with a blade (27019); on the other, the one that comes with two (27043). Both made of high-quality metal, of course. But, now, we want to talk about two other very specific ones: first, the Designer Cutter with Soft Handle and 6 Blades (27043-S). It is one of the most comfortable to use and more precise on the market thanks to its rubber and its grooves.

Second, the #2 Deluxe Cutter with Ergonomic Handle (27026-2). One of the latest additions of our firm to the catalog for tasks with paper, cardboard, plastic and electricity. It also has a protective cover so that unwanted cuts do not happen.

SETS OF BLADES AND SAFETY DISPENSER

Another cutting tools for modeling and essential crafts, the spare blades and the dispensers. Over time, cutter blades wear out and become damaged. You have to change them! Don’t worry, you can choose between different sets, it’s your choice. For #5 cutters, you have two options. The Set with 4 Blades with Different Shapes (27048) or the Set with 8 Blades with Different Shapes (27046).

For the #1 cutters, two other possibilities. Well the Set with 5 Blades with Different Shapes (27049) well the Set with 10 Blades with Different Shapes (27045) .

Let’s not forget a great and very useful novelty. Dispensers with blades! There is nothing more practical than our Safety Dispenser with 10 Blades for Cutter #5 (27631).

On the next blog post, we will finish showing you the rest of the cutting tools for modeling and crafts. At Artesania Latina we have an extensive catalog. Feel free to read it! Meanwhile, you can investigate other modeling tools clicking here.

Read the second part of the post…

Ship Models

Sailboat Model Bluenose II: One of the Most Famous Regatta and Fishing Schooners in History

Posted on August 4, 2022August 4, 2022 by Administrador DelBlog

For many of us, this faithful replica in miniature that we present to you is one of the most beautiful on ship models catalog by Artesania Latina. The sailboat model Bluenose II (22453) at 1:75 scale, one of the regatta and fishing schooners most famous in history. Of Canadian origin, the wooden modeling kit will delight modellers with at least an intermediate level of skills. Once built, this spectacular vessel measures 27.16” (690mm) length, 4.33” (110mm) width and 22.44” (570mm) height. It will dazzle at any room where you expose it!

Firstly, it must be emphasized that the sailboat model reproduces the beauty of the original schooner in the most careful and precise way. In addition, its construction system using false keel and frames brings the assembly of the naval model closer to the construction of the real ship. Before we get to know the kit contents, let’s review the fabulous history of this beautiful ship.

HISTORY OF BLUENOSE SCHOONER: THE FASTEST SAILBOAT

Its name is due to the nickname given to the inhabitants of Nova Scotia (blue nose), where the schooner was launched on March 26, 1921. In this sense, it was built at the Smith & Rhuland.

The Bluenose was operating in the Grand Banks region along with dozens of other vessels. This is a peculiar area of the North Atlantic, comprised between the coast of Canada and Labrador. It is subject to periodic mists that make it an Eden for fishermen. There, hake, cod, salmon and tuna are found in prodigious quantities. That is why this schooner is also known as ‘The Queen of the Grand Banks’.

He was going to fish in Newfoundland waters but his destiny changed. It was seen that this fast schooner won all the regattas that were organized on the east coast of the United States. These fishing boats, especially because of their sails, are conditioned to reach great speed.

Thus, the Bluenose was winner of the North Atlantic International Fishermen’s Trophy in all the races held between 1920 and 1938. Captain Angus Walter, at the forefront. In 1942, despite the efforts of this captain and many others who tried to keep the ship in Nova Scotia, the Bluenose was sold to carry cargo in the West Indies. On January 28, 1946, when running aground on a coral reef off the coast of Haiti.

Lastly, the Bluenose II, built in 1964, is an exact replica of the original and the last of the tall Schooners. Now he is an ambassador, symbol and tourist attraction of the city of Lunenburg, where he continues to sail today. Want to visit? Take a look at his official page.

SAILBOAT MODEL: KIT CONTENTS OF BLUENOSE II

The sailboat model Bluenose II (22453) is made of wood and metal with high quality parts. As can be seen in this image of the stern, its finesse and elegance, no doubt. It’s a legend scale model to build!

That is why the modeling kit with the Bluenose II sailboat model contains high-precision laser-cut board parts –they fit perfectly-, hardwoods, brass, cast iron, threads and cotton sails sewn by hand ready to be placed.

Lots of beautiful and real details are included in this modeling kit. These give the Bluenose II a perfect appearance compared to the original ship.

Also, its precise step-by-step instructions on DVD for computer format will help you effectively during the process of building the sailboat model. Also, you can download for free the digital assembly guide in the Bluenose II product sheet. Available languages? Spanish, English, French, Italian, German, Portuguese and Dutch.

On the video below, our modelers friends can see the contents of the 1:75 scale wooden naval modeling kit from Bluenose II (22453). Please note that paper instructions are no longer available, we are sending them on DVD to help prevent global logging. One of the fundamental commitments of Artesania Latina in the 21st century.

In short, the sailboat model Bluenose II in wood, an exact replica of the Canadian regatta and fishing schooner, is unavoidable for any modeller. Build it and tell us about your experience!

Model Building

Modeling Gift Packs with Model Kit, Paints, Figurines and Tools for Modelers

Posted on July 28, 2022February 24, 2023 by Administrador DelBlog

Many times, the modelers’ loved ones know about their hobby but don’t know what to give them. The challenge of giving away modeling. What model and accessories to buy? Have I got it right? Something is missing? Will you like it? These and many other questions go through their heads creating many doubts. So Artesanía Latina has decided to make it easier for all of them. Even modelers who want to give themselves. We have created some Modeling Gift Packs to offer very interesting ideas by including the model, the paints, the figurines and, in addition, some tools in the same product. And at a lower price than buying them separately! Let’s get to know the ones currently in our catalog!

MODELING GIFT PACKS: MODEL OF CARAVEL SANTA MARIA

We start with a faithful replica of an historical miniature, fundamental for Humanity. The Santa Maria Model Gift Pack (22411-L) includes the caravel model at 1:65 scale (22411-N), the set of 10 metal figurines (22411-F) with characters such as Christopher Columbus, and the specific set of acrylic paints (277PACK8). Finally, some great modeling tools. It contains synthetic-hair round brush size 4 (17204), cutter nº1 scalpel (27019), curved fastening tweezers (27021), sanding block for wood (27014) and white glue (27602).

MODELING GIFT PACKS: MODEL OF PADDLE STEAMER KING OF THE MISSISSIPPI

Another super emblematic ship of naval history is presented in King of the Mississippi Model Gift Pack (20515-L). Firstly, include the 1:80 scale wooden model of the American paddle steamer (20515). Secondly, the pack comes with the set of 18 metal figurines (20515-F). Thirdly, the set of specific acrylic paints (277PACK6). As gifts, it comes with a 125 ml transparent semi-gloss varnish jar (27605), a synthetic hair round brush size 4 (17204) and another flat size 8 (17108). Giving away modeling and getting it right with one this gift packs is guaranteed, like the smile of the modeler who receives it.

MODELING GIFT PACKS: MODEL OF FRIGATE HERMIONE LA FAYETTE

The so-called ‘Freedom Frigate’ also has its own pack. Find out the magnificent Hermione La Fayette Modeling Gift Pack (22517-L). This one will surprise you with the 1:89 scale model of the French ship (22517-N), the set of 14 metal figurines (22517-F) and the specific acrylic paints set (277PACK4). Anyone who receives one of these modeling gift packs will love it, without a doubt! Giving away modeling is illusion!

MODELING GIFT PACKS: MODEL OF TRAINING SHIP JUAN SEBASTIÁN ELCANO

This pack brings the distinguished name of the pioneer of round the world by boat, Juan Sebastián Elcano. Of course, without forgetting his Portuguese partner Fernando Magallanes. With the Juan Sebastián Elcano Model Gift Pack (22260-L) will be a guaranteed success when giving away modeling. It is one of the favorite kits of our modelers friends. You will find the 1:250 scale model in plastic and wood (22260) and the specific set of acrylic paints (277PACK17). As a tools bonus, synthetic-hair round brush size 4 (17204), cutter nº1 scalpel (27019), curved fastening tweezers (27021), sanding block for wood (27014) and white glue (27602).

MODELING GIFT PACKS: MODEL SHIP OF BRITISH VESSEL HMS ENDEAVOUR

The British ship with which Captain James Cook discovered Australia, of course, has a very interesting Gift Pack. This HMS Endeavour Pack (22520-L) will excite you with tits 1:65 scale model of the ship (22520), the set of 14 metal figurines and accessories (22520-F), the set of specific acrylic paints (277PACK7) and the LED lighting set (27590). Give one of the ships that changed history!

GIFT PACK WITH MODEL OF GERMAN FIGHTER MESSERSCHMITT BF109G

One of the model aircraft jewels not only from Artesania Latina but of the entire market. The Gift Pack with Model of Fighter Plane Messerschmitt BF109G (20356-L) of World War II. It comes with the deluxe modeling kit in metal and photoetched of the 1:16 scale model (20356) and its acrylic paints set (277PACK5). What gifts does the pack have? To start, another small vintage scale model of the same plane from the Art&Wood collection (30217). Next, an exceptional 45 in 1 precision screwdriver set (27220). In addition to a straight cutting pliers (27212) and a needle nose pliers (27213).

GIFT PACK WITH MODEL OF BRITISH FIGHTER SOPWITH CAMEL

The last of the presentations now in stock in our catalog refers to the Sopwith Camel Model Gift Pack (20351-L). This one brings the 1:16 scale model of the British biplane fighter plane from World War I (20351) and the specific acrylic paints set (277PACK1). As splendid bonus gifts, synthetic-hair round brush size 4 (17204), cutter nº1 scalpel (27019), curved fastening tweezers (27021), sanding block for wood (27014), white glue (27602) and A4 cutting mat (27644). Giving away the museum quality modeling kit in this pack will brighten the day of the modeller who receives it from you.

Stay tuned because soon we will be incorporating new Modeling Gift Packs to please and excite your loved ones or, as we said, yourself as a modeler. See what’s new for 2023 here! Giving modeling as a gift is giving away passion!